On Thu, Jul 02, 2009 at 08:15:37PM -0700, Ira wrote:> I finally decided it's been long enough using my ancient HP junker
> and I built a Atom 330 based machine to replace it. I've installed
> Centos 5, Dahdi and Asterisk 1.6.2.
>
> After a bit of struggles getting the 1.2 version files converted to
> 1.6 almost everything seems to be working.
>
> All my SIP lines seem to work and calls come in as expected and all
> my DAHDI lines work with incoming calls, but I can't make an outgoing
> call on a DAHDI line.
>
> The simplest line is:
>
> exten=> s,1, dial(DAHDI/1)
Extra space?
>
> which says it can't create a DHADI channel and gives an unknown error
0.
astertisk -rx 'dahdi show channels'
cat /proc/dahdi/*
>
> As far as I can tell everything is OK, but clearly it's not and I
> don't understand why incoming calls work and outgoing calls don't.
>
> Dahdi is using a TDM400 with 4 FXO modules. The messages at boot time
> seem correct and "dahdi show channels" seems to indicate all
three
> dahdi channels I use are present and working.
>
> I'm open to any suggestions.
What happens if you call in first?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir