asterisk users - Sep 2008 - not able to make call to landline no...to mobile works fine

hi all

I have a PRI line which i have connected to my asterisk server. I am able to
make calls to mobile no through my asterisk server, while i am not able to make
calls to land line nos. This is strange. Where do u think the? problem is , is
it from the service provider or? mis configuration of my asterisk. I am from
India and using airtel pri lines. Below i am pasting you my configuration file
which works to call land line not but doesn't work for land line no.


zaptel.conf


span=1,1,0,ccs,hdb3
span=2,1,0,ccs,hdb3
bchan = 1-15,17-31
dchan = 16
bchan = 32-46,48-62
dchan = 47
loadzone = in
defaultzone = in


zapata.conf


[channels]
context=test
group=1
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
echotraining=yes
rxgain=0.0
txgain=0.0
callprogress=no
callerid=asreceived
pickupgroup=1
;pridialplan=unknown
immediate=no
;signalling=pri_cpe_ptmp
;switchtype=ni1
channel => 1-15,17-31


I have commented the pridailplan , signalling and switchtype because when i
enable this, asterisk give me warning "Ignoring pridialplan" same with
other parameter. When i disable those options still i am able to call mobile no.


when i make call , asterisk give me following log when debug mode is enabled..

asterisk*CLI> 
??? -- Executing [947521744 at test:1] Goto("SIP/2002-b76144d0",
"trunkdial|947521744|1") in new stack
??? -- Goto (trunkdial,947521744,1)
??? -- Executing [947521744 at trunkdial:1] Dial("SIP/2002-b76144d0",
"Zap/r1/47521744") in new stack
-- Making new call for cr 32854
??? -- Requested transfer capability: 0x00 - SPEECH
> Protocol Discriminator: Q.931 (8)? len=45
> Call Ref: len= 2 (reference 86/0x56) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1? Q.931 Std: 0? Info transfer
capability: Speech (0)
>????????????????????????????? Ext: 1? Trans mode/rate: 64kbps, circuit-mode
(16)
>??????????????????????????????? User information layer 1: A-Law (35)
> [18 03 a9 83 8c]
> Channel ID (len= 5) [ Ext: 1? IntID: Implicit? PRI? Spare: 0? Exclusive?
Dchan: 0
>??????????????????????? ChanSel: As indicated in following octets
>?????????????????????? Ext: 1? Coding: 0? Number Specified? Channel Type: 3
>?????????????????????? Ext: 1? Channel: 12 ]
> [1e 02 80 83]
> Progress Indicator (len= 4) [ Ext: 1? Coding: CCITT (ITU) standard (0)? 0:
0? Location: User (0)
>?????????????????????????????? Ext: 1? Progress Description: Calling
equipment is non-ISDN. (3) ]
> [28 05 b1 32 30 30 32]
> Display (len= 5) Charset: 31 [ 2002 ]
> [6c 06 21 81 32 30 30 32]
> Calling Number (len= 8) [ Ext: 0? TON: National Number (2)? NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>?????????????????????????? Presentation: Presentation permitted, user number
passed network screening (1)? '2002' ]
> [70 09 a1 34 37 35 32 31 37 34 34]
> Called Number (len=11) [ Ext: 1? TON: National Number (2)? NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)? '47521744' ]
q931.c:3087 q931_setup: call 32854 on channel 12 enters state 1 (Call Initiated)
??? -- Called r1/47521744
< Protocol Discriminator: Q.931 (8)? len=14
< Call Ref: len= 2 (reference 86/0x56) (Terminator)
< Message type: STATUS (125)
< [08 04 82 e3 98 28]
< Cause (len= 6) [ Ext: 1? Coding: CCITT (ITU) standard (0)? Spare: 0?
Location: Public network serving the local user (2)
<????????????????? Ext: 1? Cause: Info. element nonexist or not implemented
(99), class = Protocol Error (e.g. unknown message) (6) ]
<????????????? Cause data 1: 98 (152, Non-Locking Shift To Codeset 0 IE)
<????????????? Cause data 2: 28 (40, Display IE)
< [14 01 01]
< Call State (len= 3) [ Ext: 0? Coding: CCITT (ITU) standard (0)? Call state:
Call Initiated (1)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
< Protocol Discriminator: Q.931 (8)? len=10
< Call Ref: len= 2 (reference 86/0x56) (Terminator)
< Message type: SETUP ACKNOWLEDGE (13)
< [18 03 a9 83 8c]
< Channel ID (len= 5) [ Ext: 1? IntID: Implicit? PRI? Spare: 0? Exclusive?
Dchan: 0
<??????????????????????? ChanSel: As indicated in following octets
<?????????????????????? Ext: 1? Coding: 0? Number Specified? Channel Type: 3
<?????????????????????? Ext: 1? Channel: 12 ]
-- Processing IE 24 (cs0, Channel Identification)
q931.c:3844 q931_receive: call 32854 on channel 12 enters state 2 (Overlap
sending)
< Protocol Discriminator: Q.931 (8)? len=13
< Call Ref: len= 2 (reference 86/0x56) (Terminator)
< Message type: DISCONNECT (69)
< [08 02 82 9c]
< Cause (len= 4) [ Ext: 1? Coding: CCITT (ITU) standard (0)? Spare: 0?
Location: Public network serving the local user (2)
<????????????????? Ext: 1? Cause: Invalid number format (28), class = Normal
Event (1) ]
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1? Coding: CCITT (ITU) standard (0)? 0:
0? Location: Public network serving the local user (2)
<?????????????????????????????? Ext: 1? Progress Description: Inband
information or appropriate pattern now available. (8) ]
-- Processing IE 8 (cs0, Cause)
-- Processing IE 30 (cs0, Progress Indicator)
q931.c:3779 q931_receive: call 32854 on channel 12 enters state 12 (Disconnect
Indication)
??? -- Channel 0/12, span 1 got hangup request, cause 28
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate
Disconnect Request
q931.c:2920 q931_release: call 32854 on channel 12 enters state 19 (Release
Request)
> Protocol Discriminator: Q.931 (8)? len=9
> Call Ref: len= 2 (reference 86/0x56) (Originator)
> Message type: RELEASE (77)
> [08 02 81 9c]
> Cause (len= 4) [ Ext: 1? Coding: CCITT (ITU) standard (0)? Spare: 0?
Location: Private network serving the local user (1)
>????????????????? Ext: 1? Cause: Invalid number format (28), class = Normal
Event (1) ]
??? -- Hungup 'Zap/12-1'
? == Everyone is busy/congested at this time (1:0/0/1)
??? -- Executing [947521744 at trunkdial:2]
Congestion("SIP/2002-b76144d0", "5") in new stack
? == Spawn extension (trunkdial, 947521744, 2) exited non-zero on
'SIP/2002-b76144d0'
< Protocol Discriminator: Q.931 (8)? len=5
< Call Ref: len= 2 (reference 86/0x56) (Terminator)
< Message type: RELEASE COMPLETE (90)
q931.c:3719 q931_receive: call 32854 on channel 12 enters state 0 (Null)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null


I would appreciate for any kind of help

Thanks 

Birksih




-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20080901/30c04b92/attachment.htm