Jerry Geis
2009-Oct-25 23:39 UTC
[asterisk-users] some issue with libpri cant go past 1.4.1
I have a working system with asterisk 1.4.26.2 libpri 1.4.1 and zaptel 1.4.12.1 With a digium TE205p. I am trying to update to libpri 1.4.10.2. When I do, incoming calls work but outgoing does not. When I do this I "rm /usr/lib/libpri*" then just install libpri-1.4.10.2 as normal. I then do a make clean in asterisk and make distclean ,then configure, make and make install. I do that exact same thing to get back to 1.4.1 as 1.4.10.2 does not allow me to call out. Below are the log files for both. I enabled pri intense debug span 1 for both a WORKING call and an ERROR call. I basically call into my system, selection option 2 which then calls out to my cell phone. What is the issue with 1.4.10.2? Thanks, (note I tried the same thing with other libpri versions). Jerry This is the error log:> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 044 P/F: 0 > 0 bytes of data-- Restarting T203 timer q931.c:2816 q931_call_proceeding: call 4 on channel 23 enters state 9 (Incoming Call Proceeding) -- Finally transmitting 40, since window opened up (0)> [ 00 01 50 58 08 02 80 04 02 18 03 a9 83 97 ]> Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 040 0: 0 > N(R): 044 P: 0 > 10 bytes of dataStopping T_203 timer Starting T_200 timer -- Restarting T200 timer> Protocol Discriminator: Q.931 (8) len=10 > Call Ref: len= 2 (reference 4/0x4) (Terminator) > Message type: CALL PROCEEDING (2) > [18 03 a9 83 97] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 23 ]-- Accepting call from '3178672038' to '3175551212' on channel 0/23, span 1 -- Executing [3175551212 at smvoice-incoming:1] Dial("Zap/23-1", "SIP/a_to_b/3175551212") in new stack [Kmndemo*CLI> -- Called a_to_b/3175551212 [Kmndemo*CLI> < [ 00 01 01 52 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 041 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 39 to (but not including) 41 -- ACKing packet 40, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 timer [Kmndemo*CLI> -- SIP/a_to_b-0174a060 answered Zap/23-1 q931.c:2951 q931_connect: call 4 on channel 23 enters state 8 (Connect Request) -- Finally transmitting 41, since window opened up (0)> [ 00 01 52 58 08 02 80 04 07 18 03 a9 83 97 1e 02 81 82 ]> Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 041 0: 0 > N(R): 044 P: 0 > 14 bytes of dataStopping T_203 timer Starting T_200 timer -- Restarting T200 timer> Protocol Discriminator: Q.931 (8) len=14[Kmndemo*CLI>> Call Ref: len= 2 (reference 4/0x4) (Terminator) > Message type: CONNECT (7) > [18 03 a9 83 97] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 23 ] > [1e 02 81 82] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ][Kmndemo*CLI> < [ 00 01 01 54 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 042 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 40 to (but not including) 42 -- ACKing packet 41, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 timer [Kmndemo*CLI> < [ 02 01 58 54 08 02 00 04 0f ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 044 0: 0 < N(R): 042 P: 0 < 5 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 41 to (but not including) 42 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 4/0x4) (Originator) < Message type: CONNECT ACKNOWLEDGE (15) q931.c:3711 q931_receive: call 4 on channel 23 enters state 10 (Active) Sending Receiver Ready (45)> [ 02 01 01 5a ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 045 P/F: 0 > 0 bytes of data-- Restarting T203 timer [Kmndemo*CLI> [Oct 25 19:01:46] DTMF[20171]: channel.c:2262 __ast_read: DTMF end '2' received on Zap/23-1, duration 0 ms [Oct 25 19:01:46] DTMF[20171]: channel.c:2288 __ast_read: DTMF begin emulation of '2' with duration 100 queued on Zap/23-1 [Kmndemo*CLI> [Oct 25 19:01:46] DTMF[20171]: channel.c:2407 __ast_read: DTMF end emulation of '2' queued on Zap/23-1 [Kmndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> -- Executing [5068000 at a_to_b:1] Set("SIP/a_to_b-01756c20", "CALLERID(number)=3175551212") in new stack [Kmndemo*CLI> -- Executing [5068000 at a_to_b:2] Dial("SIP/a_to_b-01756c20", "Zap/g1/3175068000") in new stack [Kmndemo*CLI> -- Making new call for cr 32771 [Kmndemo*CLI> -- Requested transfer capability: 0x00 - SPEECH [Kmndemo*CLI> -- Finally transmitting 42, since window opened up (0) [Kmndemo*CLI>> [ 00 01 54 5a 08 02 00 03 05 04 03 80 90 a2 18 03 a1 83 92 1e 02 80 83 28 0b b1 47 45 49 53 2c 4a 45 52 52 59 6c 0c 21 80 33 31 37 35 36 36 31 36 37 37 70 0b a1 33 31 37 35 30 36 38 30 31 32 ][Kmndemo*CLI>> Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1[Kmndemo*CLI>> N(S): 042 0: 0 > N(R): 045 P: 0 > 59 bytes of dataStopping T_203 timer [Kmndemo*CLI> Starting T_200 timer -- Restarting T200 timer [Kmndemo*CLI>> Protocol Discriminator: Q.931 (8) len=59 > Call Ref: len= 2 (reference 3/0x3) (Originator)[Kmndemo*CLI>> Message type: SETUP (5)[Kmndemo*CLI>> [04 03 80 90 a2] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) > User information layer 1: u-Law (34) > [18 03 a1 83 92] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 18 ] > [1e 02 80 83][Kmndemo*CLI>> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0) > Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ] > [28 0b b1 47 45 49 53 2c 4a 45 52 52 59] > Display (len=11) Charset: 31 [ GEIS,JERRY ][Kmndemo*CLI>> [6c 0c 21 80 33 31 37 35 36 36 31 36 37 37] > Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number not screened (0) '3175661677' ][Kmndemo*CLI>> [70 0b a1 33 31 37 35 30 36 38 30 31 32] > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3175068000' ]q931.c:3134 q931_setup: call 32771 on channel 18 enters state 1 (Call Initiated) [Kmndemo*CLI> -- Called g1/3175068000 [Kmndemo*CLI> < [ 00 01 01 56 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 043 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 41 to (but not including) 43 -- ACKing packet 42, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 timer [Kmndemo*CLI> < [ 02 01 5a 56 08 02 80 03 7d 08 03 82 e3 28 14 01 00 ] < Informational frame: [Kmndemo*CLI> < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 045 0: 0 < N(R): 043 P: 0 < 13 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 42 to (but not including) 43 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> < Protocol Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 (reference 3/0x3) (Terminator) < Message type: STATUS (125) < [08 03 82 e3 28] < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2) [Kmndemo*CLI> < Ext: 1 Cause: Info. element nonexist or not implemented (99), class = Protocol Error (e.g. unknown message) (6) ] < Cause data 1: 28 (40, Display IE) < [14 01 00] < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Null (0) [Kmndemo*CLI> -- Processing IE 8 (cs0, Cause) -- Processing IE 20 (cs0, Call State) q931.c:3747 q931_receive: call 32771 on channel 18 enters state 0 (Null) Sending Receiver Ready (46)> [ 02 01 01 5c ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1[Kmndemo*CLI>> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 046 P/F: 0 > 0 bytes of data-- Restarting T203 timer -- Channel 0/18, span 1 got hangup, cause 99 [Kmndemo*CLI> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null [Kmndemo*CLI> -- Hungup 'Zap/18-1' [Kmndemo*CLI> == Everyone is busy/congested at this time (1:0/0/1) [Kmndemo*CLI> -- Executing [5068000 at a_to_b:3] Goto("SIP/a_to_b-01756c20", "_9XXXXXXX-CHANUNAVAIL|1") in new stack -- Goto (a_to_b,_9XXXXXXX-CHANUNAVAIL,1) [Kmndemo*CLI> [Oct 25 19:01:52] WARNING[20172]: pbx.c:2437 __ast_pbx_run: Channel 'SIP/a_to_b-01756c20' sent into invalid extension '_9XXXXXXX-CHANUNAVAIL' in context 'a_to_b', but no invalid handler [Kmndemo*CLI> < [ 02 01 5c 56 08 02 80 03 02 18 03 a9 83 92 ] < Informational frame: [Kmndemo*CLI> < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 046 0: 0 < N(R): 043 P: 0 < 10 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 42 to (but not including) 43 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= 2 (reference 3/0x3) (Terminator) < Message type: CALL PROCEEDING (2) < [18 03 a9 83 92] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 < ChanSel: As indicated in following octets < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 18 ] [Kmndemo*CLI> -- Making new call for cr 32771 -- Processing IE 24 (cs0, Channel Identification) -- Finally transmitting 43, since window opened up (0) [Kmndemo*CLI>> [ 00 01 56 5e 08 02 00 03 5a 08 02 81 d1 ]> Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 043 0: 0 > N(R): 047 P: 0 > 9 bytes of dataStopping T_203 timer Starting T_200 timer -- Restarting T200 timer [Kmndemo*CLI>> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 3/0x3) (Originator) > Message type: RELEASE COMPLETE (90) > [08 02 81 d1] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Invalid call reference value (81), class = Invalid message (e.g. parameter out of range) (5) ]NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null -- Restarting T203 timer [Kmndemo*CLI> < [ 00 01 01 58 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 044 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 42 to (but not including) 44 -- ACKing packet 43, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> -- Restarting T203 timer ----------------------------------------------------------------------- This is the working one: [Kmndemo*CLI> < [ 02 01 3a 3a 08 02 00 01 05 04 03 80 90 a2 18 03 a1 83 97 1c 18 9f 8b 01 00 a1 12 02 01 01 02 01 00 80 0a 47 45 49 53 2c 4a 45 52 52 59 1e 02 82 83 6c 0c 21 83 33 31 37 38 36 37 32 30 33 38 70 0b a1 33 31 37 35 36 36 31 36 37 37 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 029 0: 0 < N(R): 029 P: 0 < 72 bytes of data -- ACKing all packets from 28 to (but not including) 29 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=72 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: SETUP (5) < [04 03 80 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: u-Law (34) < [18 03 a1 83 97] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 23 ] < [1c 18 9f 8b 01 00 a1 12 02 01 01 02 01 00 80 0a 47 45 49 53 2c 4a 45 52 52 59] < Facility (len=26, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x12, 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0A, 'GEIS,JERRY' ] PROTOCOL 1F 8B 0001 00 (CONTEXT SPECIFIC [11]) A1 0012 (CONTEXT SPECIFIC [1]) 02 0001 01 (INTEGER: 1) 02 0001 00 (INTEGER: 0) 80 000A 47 45 49 53 2C 4A 45 52 52 59 (CONTEXT SPECIFIC [0]) < [1e 02 82 83] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ] < [6c 0c 21 83 33 31 37 38 36 37 32 30 33 38] < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation allowed of network provided number (3) '3178672038' ] < [70 0b a1 33 31 37 35 36 36 31 36 37 37] < Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3175551212' ] -- Making new call for cr 1 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 28 (cs0, Facility) Q.932 Interpretation component is not handled Handle Q.932 ROSE Invoke component [ Handling operation 0 ] Handle Name display operation Received caller name 'GEIS,JERRY' -- Processing IE 30 (cs0, Progress Indicator) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 112 (cs0, Called Party Number) q931.c:3296 q931_receive: call 1 on channel 23 enters state 6 (Call Present) Sending Receiver Ready (30)> [ 02 01 01 3c ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 030 P/F: 0 > 0 bytes of data-- Restarting T203 counter -- Restarting T203 counter q931.c:2570 q931_call_proceeding: call 1 on channel 23 enters state 9 (Incoming Call Proceeding)> [ 00 01 3a 3c 08 02 80 01 02 18 03 a9 83 97 ]> Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 029 0: 0 > N(R): 030 P: 0 > 10 bytes of data-- Restarting T203 counter Stopping T_203 timer Starting T_200 timer> Protocol Discriminator: Q.931 (8) len=10 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: CALL PROCEEDING (2) > [18 03 a9 83 97] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 23 ]-- Accepting call from '3178672038' to '3175551212' on channel 0/23, span 1 -- Executing [3175551212 at smvoice-incoming:1] Dial("Zap/23-1", "SIP/a_to_b/3175551212") in new stack [Kmndemo*CLI> -- Called a_to_b/3175551212 [Kmndemo*CLI> < [ 00 01 01 3c ] < Supervisory frame: [Kmndemo*CLI> < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 030 P/F: 0 < 0 bytes of data -- ACKing all packets from 28 to (but not including) 30 -- ACKing packet 29, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter [Kmndemo*CLI> -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> -- SIP/a_to_b-17edc390 answered Zap/23-1 [Kmndemo*CLI> q931.c:2699 q931_connect: call 1 on channel 23 enters state 8 (Connect Request) [Kmndemo*CLI>> [ 00 01 3c 3c 08 02 80 01 07 18 03 a9 83 97 1e 02 81 82 ]> Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 030 0: 0 > N(R): 030 P: 0 > 14 bytes of data-- Restarting T203 counter Stopping T_203 timer Starting T_200 timer [Kmndemo*CLI>> Protocol Discriminator: Q.931 (8) len=14 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: CONNECT (7) > [18 03 a9 83 97] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 23 ] > [1e 02 81 82][Kmndemo*CLI>> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ][Kmndemo*CLI> < [ 00 01 01 3e ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 031 P/F: 0 < 0 bytes of data -- ACKing all packets from 29 to (but not including) 31 [Kmndemo*CLI> -- ACKing packet 30, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 3c 3e 08 02 00 01 0f ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < N(S): 030 0: 0 < N(R): 031 P: 0 < 5 bytes of data -- ACKing all packets from 30 to (but not including) 31 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: CONNECT ACKNOWLEDGE (15) q931.c:3454 q931_receive: call 1 on channel 23 enters state 10 (Active) Sending Receiver Ready (31) [Kmndemo*CLI>> [ 02 01 01 3e ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 031 P/F: 0 > 0 bytes of data-- Restarting T203 counter [Kmndemo*CLI> -- Restarting T203 counter [Kmndemo*CLI> T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (31) [Kmndemo*CLI>> [ 00 01 01 3f ]> Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 031 P/F: 1 > 0 bytes of data-- Restarting T203 counter [Kmndemo*CLI> < [ 00 01 01 3f ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 031 P/F: 1 < 0 bytes of data -- ACKing all packets from 30 to (but not including) 31 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> -- Got RR response to our frame -- Restarting T203 counter [Kmndemo*CLI> [Oct 25 19:11:02] DTMF[8412]: channel.c:2262 __ast_read: DTMF end '2' received on Zap/23-1, duration 0 ms [Kmndemo*CLI> [Oct 25 19:11:02] DTMF[8412]: channel.c:2288 __ast_read: DTMF begin emulation of '2' with duration 100 queued on Zap/23-1 [Kmndemo*CLI> [Oct 25 19:11:02] DTMF[8412]: channel.c:2407 __ast_read: DTMF end emulation of '2' queued on Zap/23-1 [Kmndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> mndemo*CLI> -- Executing [5068000 at a_to_b:1] Set("SIP/a_to_b-17ee8f90", "CALLERID(number)=3175551212") in new stack [Kmndemo*CLI> -- Executing [5068000 at a_to_b:2] Dial("SIP/a_to_b-17ee8f90", "Zap/g1/3175068000") in new stack [Kmndemo*CLI> -- Making new call for cr 32770 [Kmndemo*CLI> -- Requested transfer capability: 0x00 - SPEECH [Kmndemo*CLI>> [ 00 01 3e 3e 08 02 00 02 05 04 03 80 90 a2 18 03 a1 83 92 1e 02 80 83 28 0b b1 47 45 49 53 2c 4a 45 52 52 59 6c 0c 21 80 33 31 37 35 36 36 31 36 37 37 70 0b a1 33 31 37 35 30 36 38 30 31 32 ][Kmndemo*CLI>> Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 031 0: 0 > N(R): 031 P: 0 > 59 bytes of data[Kmndemo*CLI> -- Restarting T203 counter [Kmndemo*CLI> Stopping T_203 timer Starting T_200 timer> Protocol Discriminator: Q.931 (8) len=59 > Call Ref: len= 2 (reference 2/0x2) (Originator) > Message type: SETUP (5)[Kmndemo*CLI>> [04 03 80 90 a2] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) > Ext: 1 User information layer 1: u-Law (34) > [18 03 a1 83 92] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 18 ] > [1e 02 80 83] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0) > Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ] > [28 0b b1 47 45 49 53 2c 4a 45 52 52 59] > Display (len=11) Charset: 31 [ GEIS,JERRY ] > [6c 0c 21 80 33 31 37 35 36 36 31 36 37 37] > Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number not screened (0) '3175551212' ] > [70 0b a1 33 31 37 35 30 36 38 30 31 32] > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3175068000' ]q931.c:2879 q931_setup: call 32770 on channel 18 enters state 1 (Call Initiated) -- Called g1/3175068000 [Kmndemo*CLI> < [ 00 01 01 40 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 032 P/F: 0 < 0 bytes of data -- ACKing all packets from 30 to (but not including) 32 -- ACKing packet 31, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 3e 40 08 02 80 02 7d 08 03 82 e3 28 14 01 00 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 031 0: 0 < N(R): 032 P: 0 < 13 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: STATUS (125) < [08 03 82 e3 28] < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2) < Ext: 1 Cause: Info. element nonexist or not implemented (99), class = Protocol Error (e.g. unknown message) (6) ] < Cause data 1: 28 (40, Display IE) < [14 01 00] < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Null (0) -- Processing IE 8 (cs0, Cause) -- Processing IE 20 (cs0, Call State) [Kmndemo*CLI> Sending Receiver Ready (32)> [ 02 01 01 40 ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 032 P/F: 0 > 0 bytes of data-- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 40 40 08 02 80 02 02 18 03 a9 83 92 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 032 0: 0 < N(R): 032 P: 0 < 10 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: CALL PROCEEDING (2) < [18 03 a9 83 92] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 18 ] -- Processing IE 24 (cs0, Channel Identification) q931.c:3426 q931_receive: call 32770 on channel 18 enters state 3 (Outgoing call Proceeding) Sending Receiver Ready (33)> [ 02 01 01 42 ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 033 P/F: 0 > 0 bytes of data-- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (33)> [ 00 01 01 43 ]> Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 033 P/F: 1 > 0 bytes of data-- Restarting T203 counter [Kmndemo*CLI> -- Zap/18-1 is proceeding passing it to SIP/a_to_b-17ee8f90 [Kmndemo*CLI> < [ 00 01 01 41 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 032 P/F: 1 < 0 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 42 40 08 02 80 02 03 1e 02 82 88 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 033 0: 0 < N(R): 032 P: 0 < 9 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: PROGRESS (3) < [1e 02 82 88] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] -- Processing IE 30 (cs0, Progress Indicator) Sending Receiver Ready (34)> [ 02 01 01 44 ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 034 P/F: 0 > 0 bytes of data-- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> -- Zap/18-1 is making progress passing it to SIP/a_to_b-17ee8f90 -- Zap/18-1 is making progress passing it to SIP/a_to_b-17ee8f90 [Kmndemo*CLI> < [ 02 01 44 40 08 02 80 02 01 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 034 0: 0 < N(R): 032 P: 0 < 5 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: ALERTING (1) q931.c:3341 q931_receive: call 32770 on channel 18 enters state 4 (Call Delivered) Sending Receiver Ready (35)> [ 02 01 01 46 ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 035 P/F: 0 > 0 bytes of data-- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> -- Zap/18-1 is ringing [Kmndemo*CLI> T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (35)> [ 00 01 01 47 ]> Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 035 P/F: 1 > 0 bytes of data[Kmndemo*CLI> -- Restarting T203 counter [Kmndemo*CLI> < [ 00 01 01 41 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 032 P/F: 1 < 0 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 46 40 08 02 00 01 45 08 02 80 90 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < N(S): 035 0: 0 < N(R): 032 P: 0 < 9 bytes of data -- ACKing all packets from 31 to (but not including) 32 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: DISCONNECT (69) [Kmndemo*CLI> < [08 02 80 90] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] -- Processing IE 8 (cs0, Cause) [Kmndemo*CLI> q931.c:3561 q931_receive: call 1 on channel 23 enters state 12 (Disconnect Indication) Sending Receiver Ready (36)> [ 02 01 01 48 ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1[Kmndemo*CLI>> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 036 P/F: 0 > 0 bytes of data-- Restarting T203 counter -- Restarting T203 counter -- Channel 0/23, span 1 got hangup request, cause 16 [Kmndemo*CLI> == Spawn extension (smvoice-incoming, 3175551212, 1) exited non-zero on 'Zap/23-1' [Kmndemo*CLI> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request [Kmndemo*CLI> q931.c:2715 q931_release: call 1 on channel 23 enters state 19 (Release Request) [Kmndemo*CLI>> [ 00 01 40 48 08 02 80 01 4d 08 02 81 90 ][Kmndemo*CLI>> Informational frame:[Kmndemo*CLI>> SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 032 0: 0 > N(R): 036 P: 0 > 9 bytes of data-- Restarting T203 counter Stopping T_203 timer Starting T_200 timer [Kmndemo*CLI>> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: RELEASE (77) > [08 02 81 90] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ][Kmndemo*CLI> -- Hungup 'Zap/23-1' [Kmndemo*CLI> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Delivered, peerstate Call Received q931.c:2763 q931_disconnect: call 32770 on channel 18 enters state 11 (Disconnect Request) [Kmndemo*CLI>> [ 00 01 42 48 08 02 00 02 45 08 02 81 90 ]> Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 033 0: 0 > N(R): 036 P: 0 > 9 bytes of dataT_200 timer already going (2)> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 2/0x2) (Originator) > Message type: DISCONNECT (69) > [08 02 81 90][Kmndemo*CLI>> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ][Kmndemo*CLI> -- Hungup 'Zap/18-1' [Kmndemo*CLI> == Spawn extension (a_to_b, 5068000, 2) exited non-zero on 'SIP/a_to_b-17ee8f90' [Kmndemo*CLI> < [ 00 01 01 42 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 033 P/F: 0 < 0 bytes of data -- ACKing all packets from 31 to (but not including) 33 -- ACKing packet 32, new txqueue is 33 (-1 means empty) -- Something left to transmit (33), restarting T200 counter [Kmndemo*CLI> < [ 00 01 01 44 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 034 P/F: 0 < 0 bytes of data -- ACKing all packets from 32 to (but not including) 34 -- ACKing packet 33, new txqueue is -1 (-1 means empty) [Kmndemo*CLI> -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 48 44 08 02 00 01 5a ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < N(S): 036 0: 0 < N(R): 034 P: 0 < 5 bytes of data -- ACKing all packets from 33 to (but not including) 34 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: RELEASE COMPLETE (90) [Kmndemo*CLI> q931.c:3501 q931_receive: call 1 on channel 23 enters state 0 (Null) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null Sending Receiver Ready (37)> [ 02 01 01 4a ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1[Kmndemo*CLI>> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 037 P/F: 0 > 0 bytes of data-- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> < [ 02 01 4a 44 08 02 80 02 4d ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 [Kmndemo*CLI> < N(S): 037 0: 0 < N(R): 034 P: 0 < 5 bytes of data -- ACKing all packets from 33 to (but not including) 34 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 2/0x2) (Terminator) < Message type: RELEASE (77) [Kmndemo*CLI> q931.c:3536 q931_receive: call 32770 on channel 18 enters state 0 (Null) Sending Receiver Ready (38)> [ 02 01 01 4c ]> Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 038 P/F: 0 > 0 bytes of data-- Restarting T203 counter -- Restarting T203 counter [Kmndemo*CLI> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request> [ 00 01 44 4c 08 02 00 02 5a 08 02 81 90 ]> Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 034 0: 0 > N(R): 038 P: 0 > 9 bytes of data-- Restarting T203 counter Stopping T_203 timer Starting T_200 timer> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 2/0x2) (Originator) > Message type: RELEASE COMPLETE (90) > [08 02 81 90][Kmndemo*CLI>> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ]NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null [Kmndemo*CLI> < [ 00 01 01 46 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 035 P/F: 0 < 0 bytes of data -- ACKing all packets from 33 to (but not including) 35 -- ACKing packet 34, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter [Kmndemo*CLI> quit T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (38) [Kmndemo*CLI> quit> [ 00 01 01 4d ]> Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 038 P/F: 1 > 0 bytes of data-- Restarting T203 counter [Kmndemo*CLI> quit < [ 00 01 01 47 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 035 P/F: 1 < 0 bytes of data -- ACKing all packets from 34 to (but not including) 35 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter [Kmndemo*CLI> quit -- Got RR response to our frame
Jerry Geis
2009-Oct-31 03:02 UTC
[asterisk-users] some issue with libpri cant go past 1.4.1
In my previous post which included CLI from a working call and non working call I did a diff of the two trying to find out why libpri 1.4.10.2 does not work and 1.4.1 does work (I am trying to upgrade). below is the difference that stuck out. This was EXTRA in 1.4.10.2 which is the libpri that does not work for me. Does this mean something to someone and is this a setup error I have or is there a libpri error? (summary is provided again at the bottom of this email) Thanks Jerry [ 00 01 56 5e 08 02 00 03 5a 08 02 81 d1 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 043 0: 0 > N(R): 047 P: 0 > 9 bytes of data Stopping T_203 timer Starting T_200 timer -- Restarting T200 timer ^M^[[Kmndemo*CLI> ^M> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 3/0x3) (Originator) > Message type: RELEASE COMPLETE (90) > [08 02 81 d1] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Invalid call reference value (81), class = Invalid message (e.g. parameter out of range) (5) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null I have a digium TE205P setup as PRI channels 18-23 esf,b8zs dchan is 24. using asterisk 1.4.26.2 libpri 1.4.1 WORKS and libpri 1.4.10.2 does not. using zaptel 1.4.12.1 When I make calls incoming they work. when I try to make outgoing calls they do not work. (previous message has botha working CLI and an error CLI output) What should I do next? Thanks, Jerry