asterisk users - Oct 2007 - Selecting a specific line from Zap/g And secondary dial tone

Dear List;

Thanks alot for the help.

But how can I let the second dial tone (after pressing
the extension to select that FXO port) to be
difference than normal dial tone?

Regards
Bilal Ghayad
--------------------------
Correction, on FXO port not FXS,
second, read his email first:
"Also, how it will be possible to assign an dedicated
line (connected to FXO) to an
button on the Polycom IP Phone or Broadtel IP Phone,
so if user select that button
then he will be sure that his outside call will be via
that specific line."
Just assign a key on your phone to dial that
extension, and you will
 have
dial tone on selected line,
then as a traditional PBX you can send any digits to
your provider.


On 10/1/07, Eric ManxPower Wieling <eric at fnords.org>
wrote:
>
> ignorepat continues dialtone after a leading digit
has been dialed on
> FXS ports.  How does ignorepat help this guy?
>
> Al lists wrote:
> > ignorpat is your friend
> >
> > On 9/30/07, Tzafrir Cohen
<tzafrir.cohen at xorcom.com> wrote:
> >> On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal
ghayyad wrote:
> >>> Dear List;
> >>>
> >>> How can I place a call via Zap/g1 (group) but
need to
> >>> determine the line (FXO port)
> >>> that will go via it?
> >> Simply don't use groups. Use channels directly.
To dial via the
> specific
> >> Zaptel channel NN, use Zap/NN
> >>
> >> Am I missing anything?
> >>
> >> --
> >>                Tzafrir Cohen
> >> icq#16849755             
jabber:tzafrir.cohen at xorcom.com
> >> +972-50-7952406          
mailto:tzafrir.cohen at xorcom.com
> >> http://www.xorcom.com 
iax:guest at local.xorcom.com/tzafrir



       
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469