asterisk users - Aug 2007 - TDM400P Not hanging up fast enough

Hi List,
I have a client who has a TDM400P with 4 FXO. He has a problem them when some
one calls, then hangs up it takes a good 10-15 seconds or more of the card to
realize that the line was hung up on. The phones keep reigning  After a bit it
hangs up on the line. Also there has been some hanging. (After a user on the PBX
side hangs up the card does not "release the line"). I am using
asterisk 1.2.21.1 with Zaptel 1.2.18.

Thanks.

Dovid
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/b7b1d57f/attachment.htm

Hi Dovid, I had the same problem with the same configuration 3 lines
worked fine but the fourth couldn't detect disconnect supervision (it was
a Foriegn Exchange Line).
There are two things you should try before anything else.
1. Reverse the Tip and Ring connections on the CO Lines and test again.
2. Make sure your lines are set up for "Kewl" Start.

There are lots of people who have had these problems so I would check the
archives on the TAUG

Good Luck (you may need it)

-- 
Henry L. Coleman.



< Dovid B>
> Hi List,
> I have a client who has a TDM400P with 4 FXO. He has a problem them when
> some one calls, then hangs up it takes a good 10-15 seconds or more of the
> card to realize that the line was hung up on. The phones keep reigning
> After a bit it hangs up on the line. Also there has been some hanging.
> (After a user on the PBX side hangs up the card does not "release the
> line"). I am using asterisk 1.2.21.1 with Zaptel 1.2.18.
>
> Thanks.
>
> Dovid_______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users