Hi,
I am facing problem in configuring D-channel for TE120P card.I did the
following things
/etc/zaptel.conf
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
/etc/asterisk/zaptel.conf
group=1
signalling=pri_cpe
switchtype=euroisdn
context=incoming
channel=1-15,17-31
then running the command "ztcfg -vv" I get the following
output
Zaptel Configuration
=====================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
31 channels configured.
Asterisk is running on host machine with DIGIUM card. DIGIUM
card is connected through cable to E1 card running application on other
end.On placing call from E1 card running application to asterisk PBX (
through DIGIUM card ) following error messages is coming on console mode
of asterisk
Jul 26 17:09:42 WARNING[11925]: chan_zap.c:9148 pri_dchannel:
PRI Error: We think we're the CPE, but they think they're the
CPE
== Primary D-Channel on span 1 down
Jul 26 17:09:43 WARNING[11925]: chan_zap.c:2438 pri_find_dchan:
No D-channels available! Using Primary channel 16 as
D-channel
anyway!
NOTE-> The OTHER END CONNECTED to DIGIUM is E1 CARD RUNNING APPLICATION
Can anybody tell me how to overcome this error.
Thanx and Regards
sanchal
Tzafrir Cohen
2007-Jul-28 07:43 UTC
[asterisk-users] better subject needed [was: Re: Query1]
On Sat, Jul 28, 2007 at 12:03:33PM +0530, sanchal.singh at alliance-infotech.com wrote:> Hi, > I am facing problem in configuring D-channel for TE120P card.I did the > following things > /etc/zaptel.conf > span=1,1,0,ccs,hdb3 > bchan=1-15,17-31 > dchan=16 > > /etc/asterisk/zaptel.conf[ snip ] /etc/asterisk/zaptel.conf . Hmm.. sounds familiar. Haven't I answered it already. I also recall someone replying to it just today... You have already posted that question. Two of us have already posteated follow-ups on it. Please reply to (at least one) of them rather than re-posting your question. Furthermore, your posts have no meaningful subject. This post could use a subject such as: problem in configuring D-channel for TE120P card Or even just: configuring D-channel for TE120P card -- Tzafrir Cohen icq#16849755 jabber:tzafrir at jabber.org +972-50-7952406 mailto:tzafrir.cohen at xorcom.com xorcom.com iax:guest at local.xorcom.com/tzafrir