Displaying 20 results from an estimated 7000 matches similar to: "Query1"
2007 Jul 26
10
Query
Hi,
I am facing problem in configuring D-channel. I did the following
configuration for TE-120P card
/etc/zaptel.conf
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
/etc/asterisk/zaptel.conf
group=1
signalling=pri_cpe
switchtype=euroisdn
context=incoming
channel=1-15,17-31
DIGIUM card is connected through cable to another end.On placing call
from other end to
2007 Jul 30
1
how to configure zaptel for incoming call
Hi,
I am able to dial through asterisk PBX having TE120P card to E1 card
running application. Communication was established successfully
Now, I want to do the reverse way out. I am using the following
configurations
1)zaptel.conf
span=1,1,0,ccs,hdb3,crc4
defaultzone=us
bchan=1-15,17-31
dchan=16
2)zapata.conf
group=1
signalling=pri_net
switchtype=euroisdn
context=incoming
2007 Jun 22
10
Query
Hi all,
Can anybody tell me that wether I should install DIGIUM-TE120P card on redhat9.0 2.4.20-8 or 2.6.18 kernel. I am using kernel 2.6.18 but facing a very serious problem of modutils and iptable.
Can anybody help me out.
Thanx and Regards
sanchal singh
2007 Aug 13
2
Does Digium TE120P card support MFCR2
Hi,
I have successfully configured DIGIUM card and successfully communicated
through it to the another E1 card running application. Can anybody tell me
does TE120P
support MFC/R2 protocol.
Thanks and Regards
sanchal singh
2007 Aug 13
1
Does digium TE120P card support for MFC/R2 protocol
Hi,
I have successfully configured DIGIUM card and successfully communicated
through it to the another E1 card running application. Can anybody tell me
does TE120P
support MFC/R2 protocol.
Thanks and Regards
sanchal singh
2007 Aug 24
1
Error in loading libunicall.so module while running asterisk command
On 8/23/07, sanchal.singh at alliance-infotech.com
Hi,
I am using debian 4.0 with version 2.6.18-4-686
I have downloaded the required files form site
asterisk-1.2.24.tar.gz
libmfcr2-0.0.3-1.4.tar.bz2
libsupertone-0.0.2.tar.gz
libunicall-0.0.3-1.4.tar.bz2
2007 May 21
1
CAS signalling conflicts with Clear channel
Hi,
My asterisk server was working with a 4-FXO analog
card (TDM400P).
I recently added two digital cards: a TE120P (1 PRI)
and a B410P (4 BRI).
The B410P is still unconfigured but inserted in a PCI
slot.
The TE120P's jumper is set to E1 as it will connect to
a commercial PBX's PRI card also configured as E1.
My analog channels used to be 1-4 but since I added
the new cards I changed
2007 Aug 23
1
unable to load chan_unicall.so
Hi,
I am using debian 4.0 with version 2.6.18-4-686
I have downloaded the required files form site
asterisk-1.2.24.tar.gz
libmfcr2-0.0.3-1.4.tar.bz2
libsupertone-0.0.2.tar.gz
libunicall-0.0.3-1.4.tar.bz2
spandsp-20060903.tar.gz
I downloaded and installed the files in the follwing sequence
spandsp
libsupertone
libunicall
libmfcr2-0.0.3 is
2007 Aug 17
1
Problem in installing libmfcr2 for configuring MFC/R2
Hi,
I am trying to configure for MFC/R2 for asterisk. With the help of one
of the asterisk users group
member patrick I am able to install libunicall library. Now, when trying to
install libmfr2-0.0.3 it is giving error.
On running running command $./configure
It is giving error -> can't build without libtiff
I downloaded tiff-3.8.2 and installed the libraries but still
2010 Apr 01
2
Problem with Sangoma A104 and euroisdn pri
Hi all,
My problem boils down to these errors:
... Unable to create channel of type 'ZAP' (cause 34 -
Circuit/channel congestion)
== Everyone is busy/congested at this time
This is triggered by lines in extentions.conf such as:
exten => _X.,1,Dial(ZAP/g1/${EXTEN},,W)
The system is CentOS v5.2 with Asterisk 1.4.23
(druid-asterisk-1.4.23.1-2), a Sangoma A104
2007 Oct 25
1
PRI span configuration - span remains down
Hi,
I'm trying to connect to Telewest/Virgin Media with a TE110P using
asterisk 1.4.13/zaptel 1.4.6. No matter what I try, my span always
appears as
PRI span 1/0: Provisioned, Down, Active
My zapata.conf is currently
-----------------------------------
[channels]
echocancel=yes
echocancelwhenbridged=no
echotraining=yes
switchtype=euroisdn
contect=from-pri
signalling=pri_cpe
group=1
channel
2007 Aug 01
3
TE120P in Canada
Hi All,
I'm having problems trying to get a TE120P operational in Canada.
I keep getting a congestion error when I try to make a call. I'm not
sure if my switching, parity, etc is correct. I'm hoping that someone
will be able to verify my config.
The Telco is SaskTel, with a 10 channel 50 DDI service.
Zap show channels show and ztcfg -vv looks ok and the zttool show
2007 Aug 30
0
Cannot create Incoming Outgoing call through for r2mfc protocol
Hi,
I am using debian 4.0 with version 2.6.18-4-686
I have downloaded the required files form site
asterisk-1.2.24.tar.gz
libmfcr2-0.0.3-1.4.tar.bz2
libsupertone-0.0.2.tar.gz
libunicall-0.0.3-1.4.tar.bz2
spandsp-20060903.tar.gz
I
2007 Sep 05
4
ztcfg error : TE110p error with " CAS signalling on span 1 conflicts with HDLC with ...
Dear All,
I'm integrating avaya commuication manager difinity ver 1.0 with asterisk
using B2B E1. following are the details of my H/W, zaptel configs and
software installed.
Digium TE110p
asterisk 1.2.19
cent OS 4.4
zaptel 1.2.18
libpri 1.2.4
etc/zaptel.conf
span=1,0,0,cas,hdb3
bchan=1-15,17-31
dchan=16
when i ztcfg -vvv im having this error message and the E1 is not getting up.
"cas
2006 Oct 27
2
ISDN-BRI issue
Hello all
Asterisk 1.2.10
BRIstuff PRE-1s
Debian sarge
I have an issue with my ISDN-BRI line. Asterisk tells me my D-Channel is
down, no matter is I have an actual line plugged in or not.
== Primary D-Channel on span 1 down
I somehow got it to work once! The config tools do not indicate any
errors whatsoever. Here is a rundown of various listings I can think
about. (some things may show
2008 Feb 20
0
Unable to create channel of type 'Zap' with ecmg2 and kernel 2.6.23
Hi,
I have a working Asterisk 1.2 server on kernel 2.6.22
with the OSLEC echo canceller on a Digium PRI card.
I recently switched to kernel 2.6.23 with the MG2 echo
canceller (nothing else changed). Each time I try to
establish a call on the PRI line I get a congestion
signal.
in /var/log/asterisk/full:
Feb 20 08:09:43 VERBOSE[10657] logger.c: --
Executing
2004 Jul 02
0
Channel Bank Newbie Problem
Hi all
I'm trying to configure a TE410P in Europe with three
E1s and a T1 channel bank (already bought in the US) to receive and make
calls through *. I managed to get the E1s to work, but I'm having
trouble with the channel bank (a Rhino). I have tried the bank in spans
1 and 4 changing jumpers in the card (always with no PRI connected, as I
have no PRI where I'm testing now,
2006 May 12
1
TE110P on E1
Hi,
I wonder if anyone is using Digium's TE110P card on an E1 connection.
I have been try to, but so far it wasn't much of a success.
It only works more or less in EuroISDN as PRI CPE.
And even that config gives me some trouble with channel negotiation.
My current config:
*zaptel.conf:*
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone=be
defaultzone=be
*zapata.conf:*
[trunkgroups]
2007 Oct 18
4
Issues with making calls
Hi List,
I am from Peru, I have installed an asterisk server in my company with
digium card E1 TE120P, I am having issues when i make calls, here the
error from my server
[Oct 18 09:13:50] WARNING[2377]: channel.c:3232 ast_request: No
channel type registered for 'Zap'
[Oct 18 09:13:50] WARNING[2377]: app_dial.c:1106 dial_exec_full:
Unable to create channel of type 'Zap' (cause
2005 Jun 14
2
ERROR[5539]: chan_zap.c:9750 setup_zap: Unable to load config zapata.conf
Hi,
I have this error, I have a digium card TE110P Tiger3xx
When I'm load the dirvers by this command modprobe wcte11xp I got this
error
"Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'
1 error(s) detected
FATAL: Error running install command for wct1xxp
"
when I'm Lunch the command ztcfg -vv
I got this error.