search for: te120p

Hi, I have successfully configured DIGIUM card and successfully communicated through it to the another E1 card running application. Can anybody tell me does TE120P support MFC/R2 protocol. Thanks and Regards sanchal singh

I have a brand new TE120P card that I have installed and asterisk is not starting as I am getting the error: ERROR[5054] chan_zap.c: Unknown signalling method 'pri_cpe' It seems it does not matter what I change the vaule for signalling= to, it always returns it as invalid. I have tried the config from my oth...

Hi, I have successfully configured DIGIUM card and successfully communicated through it to the another E1 card running application. Can anybody tell me does TE120P support MFC/R2 protocol. Thanks and Regards sanchal singh

Hi all I use asterisk (1.2 brach) from debian official packages and it works fine. Now I need to install and configure a Digium TE120P card, but I cannot find any guide to install it using debian packages. I would like to know if anyone of you knows about packages that would include the necessary kernel modules or any other method that won't be broken when the asterisk packages are updated. Would anyone consider just install...

Hi Folks, I have a T100P ordered from Digium in the past. Its working perfectly fine but I now need to more the server to India (out-sourcing) and we will be getting an E1 line there. Does anyone know if T100P was capable (upgradeable) or swappable so that I could use it with the E1 lines instead? Any pointers to driver/firmware update would be highly appreciated. Thanks. R -------------- next

Hi, I recently installed a TE120P in my lab with a full voice PRI (23 channels + 1 D channel). Everything is working well except echo cancellation; for the most part this isn't an issue unless one of the users is in a conference. I'm getting the following error when a call is picked up (incoming or outgoing): [Feb 25 12:5...

Hi guys, Hope someone can help me with this... I got an Asterisk with TE120P card... using dahdi 2.1.0.4 and asterisk 1.4.24. The problem is the link between the card and the telco... suddenly through the day looses connection... and the people on site just power cycle the PC and the problem got fixed.... for a while.... I've already replace the cable between the card...

Hi All, I'm having problems trying to get a TE120P operational in Canada. I keep getting a congestion error when I try to make a call. I'm not sure if my switching, parity, etc is correct. I'm hoping that someone will be able to verify my config. The Telco is SaskTel, with a 10 channel 50 DDI service. Zap show channels show an...

Hi, I've been playing with a TE120P on Asterisk 1.4.18 with zaptel 1.4.9 and I've ran into an issue. After a call placed any DTMF tone causes the server to lock up entirely. Calls placed work just fine (except for a problem with echo cancellation). The phone registered to the server is a Linksys SPA-942. I am seeing in zttool so...

Dear all I got one more error my asterisk E1 card connected with avaya E1 card [avaya]-------E1-----[asterisk] i got this 2 error what is start asteris on consol mode asterisk -vvvvc [Jul 27 09:51:29] WARNING[737] chan_zap.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too. [Jul 27 09:51:30] WARNING[737] chan_zap.c: PRI Error on

Hello List, We purchased a TE120P card from Digium and it works great. The only problem is that we are still experiencing echo on some calls. I've tried various echo cancellers (right now we are using OSLEC) and still no luck. My question has anyone gone from the TE120P to a Sangoma A101D-X Single Port T1/E1/J1 w/ echo c...

The Telco in Canada is been real painful. I was wondering if anyone has installed a Digium TE1X0P card in Canada and if their Telco was so difficult. The Telco will not provide us a service until they see a FCC or DOC number for the equipment ware are connecting to their service. If have found "FCC Part 68, ANSI/ITA-968-A, Including Amendment A1 and A2 Industry Canada CS-03"

Hello, Digium support kindly proposed to ship a TE120P card to help resolve the issue. I plugged in the card, and introduced the loopback plug. I cleared the red alarm for a while and then i started seeing alarm switching from Yel/Recovering to Blue/Rec with a lot of IRQ Misses. I call Digium that assisted us, and we noticed IRQ sharing with the VG...

Hi all, Can anybody tell me that wether I should install DIGIUM-TE120P card on redhat9.0 2.4.20-8 or 2.6.18 kernel. I am using kernel 2.6.18 but facing a very serious problem of modutils and iptable. Can anybody help me out. Thanx and Regards sanchal singh

Hi, I am facing problem in configuring D-channel for TE120P card.I did the following things /etc/zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 /etc/asterisk/zaptel.conf group=1...

Here is the scenario: Asterisk 1.14.13; zaptel 1.4.6; Digium TE120P (same problem with various previous versions; same problem with different TE120P cards). The customer has a partial (10 B-Channel) PRI that when it is busy (eight or more B channels in use), tends to fail as shown below... [Jan 26 23:00:31] ERROR[31893] chan_zap.c: Write to 28 failed: Unknown...

Hi all, We are using - a dell sc440(Single dual-core intel xeon 3040, 1.86GHz,1066MHz front size bus 2MB cache) as the asterisk server - dell 400sc(Intel P4) as a SER server - digium isdn card, TE120P at Asterisk server - Bandwidth: 2Mbps/512kbps All SIP Phones are registered to SER server, and SER will route all outgoing calls to Asterisk server. My problem is the sound quality goes down if more than 3 concurent calls to PSTN. Logically i think our system and bandwidth are more than enough to...

We have a customer that has Asterisk 1.4.12.1, Zaptel 1.4.5.1, Asterisk-Addons 1.4.3. running on a Dell Poweredge 1900 server (Dual Core Xeon, 4gb RAM, 500gb Raid 5). Until a month ago they had two TE120P cards and everything was working fine. Since they needed to add a third E1 line we decided to change one of the TE120P cards with a TE210P. After the change we had a couple of crashes (server completely locks up). At first we thought we had a defective card so we changed it but kept having the s...

Hello List, I just have a query.... is it possible to have 2 or more telephone number mapped to the same E1 line and if so will the TE120P card pick up the last 4 digits of each number - as it is currently doing for the one? -- Kind Regards Etienne Pretorius -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070718/c6ad6c73/attachment.ht...

Hi, My asterisk server was working with a 4-FXO analog card (TDM400P). I recently added two digital cards: a TE120P (1 PRI) and a B410P (4 BRI). The B410P is still unconfigured but inserted in a PCI slot. The TE120P's jumper is set to E1 as it will connect to a commercial PBX's PRI card also configured as E1. My analog channels used to be 1-4 but since I added the new cards I changed them to 101-104....