New system install. At what point, in bootup, should I be able to get a dial tone on the phone ports on a tdm400p? There are two fxo and two fxs ports. I know which to plug into <g>. At boot up, as soon as wctdm is loaded, all the ports "go green, yet I do not get a dial tone on the phone ports. I thought as long as zapata.conf is correct, the board should be "functional." at that point. joe a.
On Wed, Mar 14, 2007 at 07:53:58AM -0400, joe acquisto wrote:> New system install. > > At what point, in bootup, should I be able to get a dial tone on the > phone ports on a tdm400p? There are two fxo and two fxs ports. I > know which to plug into .Only after: * The card's driver has loaded and initialized the card's module. * It has been configured (ztcfg) * Asterisk has started> > At boot up, as soon as wctdm is loaded, all the ports "go green, yet I > do not get a dial tone on the phone ports. I thought as long as > zapata.conf is correct, the board should be "functional." at that > point.It is Asterisk that actually gives the dialtone. So it is not enough to have /etc/asterisk/zapata.conf properly configured. You also need asterisk running. -- Tzafrir Cohen icq#16849755 jabber:tzafrir@jabber.org +972-50-7952406 mailto:tzafrir.cohen@xorcom.com http://www.xorcom.com iax:guest@local.xorcom.com/tzafrir
Thanks. Very reassuring. It really must be too early. <g> joe a. Tzafrir Cohen<tzafrir.cohen@xorcom.com> Wrote: 3/14/2007 8:23 AM:> On Wed, Mar 14, 2007 at 07:53:58AM -0400, joe acquisto wrote: >> New system install. >> >> At what point, in bootup, should I be able to get a dial tone on the >> phone ports on a tdm400p? There are two fxo and two fxs ports. I >> know which to plug into . > > Only after: > > * The card's driver has loaded and initialized the card's module. > * It has been configured (ztcfg) > * Asterisk has started > >> >> At boot up, as soon as wctdm is loaded, all the ports "go green, yet I >> do not get a dial tone on the phone ports. I thought as long as >> zapata.conf is correct, the board should be "functional." at that >> point. > > It is Asterisk that actually gives the dialtone. So it is not enough to > have /etc/asterisk/zapata.conf properly configured. You also need > asterisk running. > > -- > Tzafrir Cohen > icq#16849755 jabber:tzafrir@jabber.org > +972-50-7952406 mailto:tzafrir.cohen@xorcom.com > http://www.xorcom.com iax:guest@local.xorcom.com/tzafrir > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users