search for: misdnus

Hi List, I?m having problems compiling chan_misdn: asterisk:/usr/src/chan_misdn-beta-0.0.3-rc4 # make install cc -ggdb -Wall -D_GNU_SOURCE -Wno-missing-prototypes -Wno-missing-declarations -fPIC -I/usr/src/asterisk/include -DAST_CONFIG_DIR=\"/etc/asterisk/\" -I/usr/src/mISDNuser/include -I/usr/src/linux-2.6/include -I/usr/src/mISDNuser/i4lnet/ -Wall -c -o chan_misdn.o chan_misdn.c chan_misdn.c:30:34: asterisk/channel_pvt.h: No such file or directory chan_misdn.c: In function `misdn_call': chan_misdn.c:664: error: dereferencing pointer to incomplete type chan_misdn....

hello there, I am facing an issue with misd/misdnuser/lcr in the system I am running debian 7 and I managed to install from git misdn/misdnuser but in lcr I am getting: chan_lcr.c: In function 'load_module': chan_lcr.c:3520:24: warning: assignment makes pointer from integer without a cast [enabled by default] make[2]: *** [chan_lcr.po] Erro...

hi i am experiencing some problems with the configuration of an BN8S0 Beronet card. I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel 2.6.16.18 and the enabled the following: <*> ISDN support x x Old ISDN4Linux ---> x x --- CAPI subsystem x x <M> CAPI2.0 support x x [*] Verbose reason code reporting (kernel size +=7K) x x [*] CAPI2.0 Middleware support (EXPERIMENT...

Hi list, I've installed Asterisk 1.4.0 with newest mISDN 1.0.4 + mISDNuser 1.0.3 on Fedora Core 6. I get many compilation error on mISDN. It wants to include linux/config.h That I fixed by removing the #include line at every occurance. (Don't know if that was a wise move, but it then compiled). mISDNuser and asterisk compiled fine, and asterisk can find and use th...

Hi, I would appreciate some advice on the following: how does one use a single BRI port HFC chipset based ISDN cards with the latest DAHDI, libpri and Asterisk 1.8? For Asterisk 1.4 I would first install mISDN & mISDNuser and then build Asterisk 1.4. Now I noticed that Digium's HFC chipset based B410P is supported by the latest DAHDI & libpri but reading the source of the wcb4xxp driver it only seems to support HFC chipset based cards with _2_ or more BRI ports. What do I use for a _single_ BRI port ca...

Hello, I short question: I want to connect Asterisk to OpenBSC with mISDN, mISDNuser and LCR. Do I need chan_lcr? I have: Asterisk 1.8 mISDN .v2 integrated in Kernel 3.0.22 mISDNuser lcr 1.7 HFC-E1 Evaluation board from cologne chip I tried to configure Asterisk with <./configure --prefix=/usr/src/lcr --with-gsm-bs> and it runs without errors, But make and make install...

...stall So far so good, but the following command failed: make b410p I did some digging on google and found a guide on how to install it manually, but the result was the same. I got these files ftp.digium.com/pub/telephony/zaptel/b410p/misdn-b410p.tar.gz ftp.digium.com/pub/telephony/zaptel/b410p/mISDNuser.tar.gz And did the following: make force make make install All the commands worked just fine. Remark: The guide I was using told me to cd into the mISDNuser directory, but didn't do anything with it. /etc/init.d/misdn-init scan gives me: [OK] found the following devices: card=1,0x4 So...

Hi all! I'm getting an error when I try to start asterisk with chan_misdn. I patched my kernel (2.6.12.4), and compiled the whole stuff (kernel, mISDNuser, asterisk, chan_misdn). I got mISDN from http://isdn.jolly.de/download/v3.0/ I'm using a CVS Snapshot of asterisk, which was checked out about 5 hours ago. This is the error: [chan_misdn.so]Aug 15 14:13:29 WARNING[4929]: loader.c:314 __load_resource: /usr/lib/asterisk/modules/chan...

I'm using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output: Module Size Used by zaptel 178308 0 avmfritz 21388 0 mISDN_isac 14336 1 avmfritz mISDN_dsp 191424 0 l3udss1 34184 0 mISDN_l2 39040 0

...ommands are not available to me in the CLI so I cannot tell if my box is correctly interfacing with the ISDN card Any ideas what can be going wrong ? My installation procedure looked like this : cd /usr/src/ wget http://www.misdn.org/downloads/mISDN.tar.gz wget http://www.misdn.org/downloads/mISDNuser.tar.gz tar xzf mISDN.tar.gz tar xzf mISDNuser.tar.gz cd ../mISDN-1_1_7_2/ make install cd ../mISDNuser-1_1_7_2/ make install cd asterisk-1.4.21.2/ make menuconfig (I chose chan_misdn) make; make install; -------------- next part -------------- An HTML attachment was scrubbed... URL:...

...hfcpci/b17-1 (pres=0x00, ton=0x00) -- hfcpci: received CONNECT_CONF PLCI = 0x201 -- Called hfcpci/b17 == hfcpci: Interface cleanup PLCI=0x201 == No one is available to answer at this time (1:0/0/0) == Auto fallthrough, channel 'SIP/xlite1-3b80' status is 'NOANSWER' mISDNUser test tools show ISDN line working (testcon). capi info shows that 2 B channels are available capiinfo utility also dumps meaningful information - indicating that it indeed recognises the card. chan_capi version - CVS as of Sep 2, 2005 from chan-capi.sf.net I read comments on voip-info about 2.6...

...sdn.so from Asterisk, I get a "No lower Id port:1" error. The /var/log/messages file says: "MISDN free_device: entitylist not empty" I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6 and against mISDNuser-CVS-2004-08-29. The /dev/mISDN node was also created. I'm loading the kernel modules this way: modprobe zaptel modprobe ztdummy modprobe mISDN_core modprobe mISDN_l1 modprobe mISDN_l2 modprobe l3udss1 modprobe mISDN_dsp modprobe w6692pci protocol=2 layermask=1 Then I start asterisk: asteri...

...sdn. The misdn is running and all cards (TDM40B+AVMFritz) is initialized. When im going to start asterisk with the chan_misdn.so module i get the following error in the log (on console) and asterisk ist hanging. i use the current CVS-HEAD of asterisk (7 Days old), chan_misdn-0.2.1-rc2 and mISDN+mISDNuser from the automated installation. Is here anybody who have any idea why asterisk hangs. I searched all the mailinglists, and doesn't get any information on what's wrong. c&p from the console: ---------------------------- [chan_local.so] => (Local Proxy Channel) == Registered c...

...l make -C app_bundle make[1]: Entering directory `/usr/src/install-misdn-mqueue/app_bundle' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/install-misdn-mqueue/app_bundle' cd mqueue-misdn; cvs -d:pserver:anonymous:readonly@cvs.isdn4linux.de:/i4ldev co mISDN mISDNuser ; cvs [checkout aborted]: connect to cvs.isdn4linux.de(217.160.76.191):2401 failed : No route to host make: *** [misdn] Error 1 But I'm able to connect to cvs.isdn4linux.de ftp server [root@nbirma1 install-misdn-mqueue]# ftp cvs.isdn4linux.de Connected to listserv.isdn4linux.de. 220-*******...

Hi list, I installed a fresh Debian/Etch with Asterisk 1.4 and Zaptel 1.4 from SVN for 2 Digium B410P card. I ran configure in Asterisk dir, went in zaptel dir and: make, make install, make b410p. Everything is ok. Now I want to compile Asterisk but can't activate the chan_misdn channel which depends on -from menuselect- isdnnet(E), misdn(E), suppserv(E) When I made the make b410p, all

...SEND: State Ring pid:2 P[ 4] --> incoming_early_audio off -- Called SIP/0146472130 -- Called SIP/ekiga -- SIP/0146472130-08199d18 is ringing I didn't touch to the mISDN installation other than upgrade the kernel and its modules (compiled on another machine). Should I also upgrade mISDNuser to 1.1.1 on that server? Thanks,

...ssume is using the software echo cancellation). Obviously there is no fxotune for mISDN, no oslec (well there is, but the patches to enable this seem to come with significant delay), and no HPEC so I'm at a bit of a loss as to what to do. I've tried multiple versions of chan_misdn, mISDN, mISDNuser all to no avail. Does anyone have any ideas? - -- Cheers, Matt Riddell Director _______________________________________________ http://www.venturevoip.com/news.php (Daily Asterisk News - html) http://www.venturevoip.com (Free Asterisk Voip Community) http://www.venturevoip.com/newrssfeed.php...

...ls (max 18 ISDN channels). Both asterisk systems have a B410P 4-port ISDN card (http://www.digium.com/en/products/digital/b410p.php). # uname -a Linux voip1 2.6.23-gentoo-r8 #1 SMP Fri Oct 17 01:10:38 CEST 2008 i686 Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz GenuineIntel GNU/Linux misdn 1.1.7.2 misdnuser 1.1.7.2 Has anyone ever witnessed this issue with ISDN cards and Asterisk? What does Digium recommend for the B410P? (kernel version, misdn version, asterisk version) In other words, what should I try? (new kernel, new misdn?) Or should I move to DAHDI? But does DAHDI "fully" suppor...

Building from the source RPM I get an error mISDNuser-devel is needed I was able to obtain all the other build dependencies from EPEL 6, but that one doesn't appear to existing in EPEL or in packages.asterisk.org I then tried adding --nodeps to the rpmbuild command: rpmbuild --rebuild --nodeps asterisk-11.4.0-1_centos6.src.rpm Running as...

...do need to interface an ISDN line to asterisk and i bought an external isdn card usb. it is a dlink du 128ta. i have seen that i need misdn and lcr. in a clean install of debian 6.0.8 i installed through git the misdn and misdn user. unofortunatelly i am stuck with the lcr. i have installed misdn, misdnuser and LCR through git from misdn.eu. i am not familiar with LCR, but with dadhdi. i do not know how to place calls from asterisk through LCR to dlink usb. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments...