search for: nt_ptmp

...07: P[ 1] --> we have already send Release_complete and the line is "BUSY". The phones on the NT line works fine, and SIP <-> mISDN (NT) calls has no problems. All comment lines has been removed to keep mail size reasonable. /etc/misdn-init.conf: card=1,0x4,dtmf te_ptmp=1,2 nt_ptmp=3,4 option=1,master_clock poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=1 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log bridging=yes stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=...

...sdn-init start" [ii] make your ports (1-4) available in asterisk by editing "/etc/asterisk/misdn.conf" [ii] run "/etc/init.d/misdn-init config" to store this information to /etc/misdn-init.conf I then edited the setting in /etc/misdn-init.conf, guessing I'll be needing nt_ptmp=1,2,3,4 (although I have no idea) Now the problem, if I run /etc/init.d/misdn-init start I get the following: /etc/init.d/misdn-init: line 91: [: 5: unary operator expected ----------------------------------------- Loading module(s) for your misdn-cards: ----------------------------------------...

...can for channel 24 to none ------------------------------------------------------------------------ Everything seems very good so far as! F.Asterisk, ./configure-->make-->make install-->make samples --(no errors) G.As you said before, NT mode with wcb4xxp only supports nt_ptp,and nt_ptmp is not work right now. So I set dahdi-channels.conf like this: ------------------------------------------------------------------------ ; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) group=0,11 context=from-pstn switchtype = euroisdn signalling = bri_net channel => 1-2 conte...

...- TE-Mode, PTP > # te_ptmp - TE-Mode, PTMP > # te_capi_ptp - TE-Mode (capi), PTP > # te_capi_ptmp - TE-Mode (capi), PTMP > # nt_ptp - NT-Mode, PTP > # nt_ptmp - NT-Mode, PTMP > # <port_number> port that should be considered > # > te_ptmp=1,2,3,4 > > # > # Port Options > # > # Syntax: option=<port_number>,<option>[,<option>...] > # > # <option> master_clock - use master clock...