I'm not a big fan of Line Side for Asterisk applications.... the individual
channels have to be reserved (reminds me of the "old" days in
telephony) and I don't like that... rather make it a tie trunk and use
ARS/AAR routing in the Definity... much more general application. This also
makes routing on the Asterisk a lot simpler.
Easy to make the changes.... will advise if desired.
Mark
> isdn-pri/line-side, protocol b, and a I think were using a TN464
> card on the definity. I'll have to check on the card. We are
> using pri_net singnaling and national is our switchtype in
> asterisk. I'll try the changes and report back. Thank you so much!
>
> -CP
>
> ________________________________________
> From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-
> users-bounces@lists.digium.com] On Behalf Of mavince@optonline.net
> Sent: Sunday, November 05, 2006 6:09 PM
> To: asterisk-users@lists.digium.com
> Subject: [asterisk-users] Definity Asterisk Caller ID Issue
>
> You should run the 4ESS protocol ("a" on the Definity command
> "change DS1 board#) as the Definity may not send Display Name
> for the NI-2 protocol (settings "b" or "d")
> ?
> Remember to?make the Asterisk zapata settings consistent with
> the Definity.
> ?
> On the Definity trunk group form Page 1, change "Codeset to send
> Display" to "0 (zero)", also make sure Outgoing Display is
"y" .
> On Page 2, make sure Send Name and Send Calling Number are "y".
> ?
> Setting Send UCID = "n" as well as Send Codeset 6/7LAI =
"n",
> will clean up those Unknown IEs.
> ?
> The Zaptel software only supports CodeSet 0 Information Elements
> so the Display Name has to be? in Codeset 0.
> ?
> Mark
>
> > >
> > !! < Unknown IE 1544 (len = 6)
> >
> > !! Unknown IE 8 (cs6, Unknown Information Element)
> >
> > Progress Description: Calling equipment is non-ISDN
> >
> > TON: International Number
> >
> >
> >
> >
> >
> > xxx*CLI>
> >
> > < [ 02 01 d4 d2 08 02 0a e6 05 04 03 90 90 a2 18 03 a1 83 8b
> 1e
> > 02 81 83
> > 70 05 91 34 33 38 39 96 08 04 d0 35 30 80 ]
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20061106/048bd03d/attachment.htm
