asterisk users - Jun 2006 - Is anybody using XEN in conjunction with Asterisk and/or Openser?

Is anybody using XEN in conjunction with Asterisk and/or Openser?

I would like to get some info about such an environment and experience 
reports.


bye

Ronald Wiplinger

I had that running in my small home Asterisk setup for a while, however I 
had to move back to an older kernel to support a SATA driver (mv_sata). It 
looks like as of late 2.6.16 and 2.6.17 they've updated the driver so in a 
week or so I am going to try builind it again and create a DomU with 
Asterisk with a X100P clone FXO port. I can't remember all I did before, but
I'll be sure to post my experiences in the coming weeks.

Ryan


----- Original Message ----- 
From: "Ronald Wiplinger" <ronald@elmit.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users@lists.digium.com>
Sent: Saturday, June 24, 2006 2:54 AM
Subject: [Asterisk-Users] Is anybody using XEN in conjunction with 
Asteriskand/or Openser?

> Is anybody using XEN in conjunction with Asterisk and/or Openser?
>
> I would like to get some info about such an environment and experience 
> reports.
>
>
> bye
>
> Ronald Wiplinger
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

> 
> Is anybody using XEN in conjunction with Asterisk and/or Openser?
> 
> I would like to get some info about such an environment and experience
> reports.
> 
Before I had access to a spare machine, I ran it under xen and it worked
well enough to do the testing I wanted to do. I don't know that the
realtime stuff is there though.

At the time I was running it in a domU, with a pci i4l supported card
mapped through via PCI. I had to do a bit of mucking around though to
get the ztdummy timer going properly, as xen ran with a 100hz instead of
1khz timer. Not sure if this is still the default case.

James