asterisk users - Jun 2006 - Asterisk-1.2.9.1 with Siemens HiPath 4000

Hello all.
 I have installed and functioning asterisk-1.2.9.1 where I effected one
upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000
in ISDN PRI with protocol QSIG, the one that is happening he is that the
calls originated for PABX Siemens and destined to SIP phones asterisk are
being without audio, nor Ring, is dumb. They could help in this case me?
Best Regards

Josu?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060623/433cd0f4/attachment.htm

Hi Josu?

if the Siemens phone calls Asterisk, it didn't get a
dial tone from Asterisk? Is it correct?

if yes, this is depending of Asterisk which didn't
generates a ringback messages as it expexts dial ton
generation localy. So try this workaround for HiPath
local dial ton generation:
-> Add option TR6Q(TRGT) to the class of trunk (COT)
parameters

hope it will help...

rich





--- Josu? Conti <josueconti@gmail.com> wrote:
>   Hello all.
>  I have installed and functioning asterisk-1.2.9.1
> where I effected one
> upgrade in asterisk-1.0.9, is interconnected with a
> PABX Siemens HiPath 4000
> in ISDN PRI with protocol QSIG, the one that is
> happening he is that the
> calls originated for PABX Siemens and destined to
> SIP phones asterisk are
> being without audio, nor Ring, is dumb. They could
> help in this case me?
> Best Regards
> 
> Josu?
> > _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
> --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com

Hi Josue...

i have taken a short look at the configuration you
sent to me off list. 

First of all, try to change the protocol from ECMAV2
to ETSI or EDSS1 (set the segmentation to 1) and like
suggested by Silviu change the switchtype=EuroISDN
too. EcmaV2 is normaly used to interconnect Siemens
PBXs.

Something strange is that in the HISTA you have
severals "CIRCUIT  EXT DIALTONE ERROR" from the TM2LP
(analog trunk line).

i will compare tomorrow the COT with the one we have
configured at the office...

rich

--- Josue Conti <josueconti@gmail.com> wrote:
> Hi Richard
> Thank you very much for its attention
> Below my configurations of HiPath the 4000 and
> asterisk-1.2.9.1 Agrade???o its
> attention, if to need something to communicate
> itself

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com

Hi Richard, I have the interconnection in qsig, functioning but that
problem of the calls is occurring to be dumb some times. Use qsig because of
the easinesses as caller id and name of the origin in the destination
telephone. You can help me? It knows if the easinesses to enter the
equipment are compatible as callpickup, transfer?
Regards
Josu?


2006/6/27, richard Coco <coco_richard@yahoo.com>:
>
>
> Hi Josue...
>
> i have taken a short look at the configuration you
> sent to me off list.
>
> First of all, try to change the protocol from ECMAV2
> to ETSI or EDSS1 (set the segmentation to 1) and like
> suggested by Silviu change the switchtype=EuroISDN
> too. EcmaV2 is normaly used to interconnect Siemens
> PBXs.
>
> Something strange is that in the HISTA you have
> severals "CIRCUIT  EXT DIALTONE ERROR" from the TM2LP
> (analog trunk line).
>
> i will compare tomorrow the COT with the one we have
> configured at the office...
>
> rich
>
> --- Josue Conti <josueconti@gmail.com> wrote:
>
> > Hi Richard
> > Thank you very much for its attention
> > Below my configurations of HiPath the 4000 and
> > asterisk-1.2.9.1 Agrade?o its
> > attention, if to need something to communicate
> > itself
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060627/7203a1e6/attachment.htm