asterisk users - Jun 2006 - TDM01B Card Install Problems

Hi all,

Your help would be greatly appreciated, I have been struggling for days with
inst / config of TDM01B.

I have installed TDM01B.

Using Asterisk 1.2.9.1 on RH Ent 4.00

cat /proc/interrupts shows card wctdm on int 10.

Green LED is on (module is in port 4).

I have my /etc/zaptel.conf which includes fxsks=4

zttool show my card.
ztcfg -vv shows my card.

zap show status shows my card but I see only pseudo under zap show channels.

Furthermore, when I call my pstn line, I see no activity on the CLI

I even tried

[pstn-line]
exten => s,1,answer()
 exten => s,2,hangup()

I can't get it to work.

Here is my zapata.conf

[channels]
context=pstn-line
signalling=fxs_ks
echocancel=yes
echotraining=800
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
immediate=no
callprogress=no
;channel => 4

If I uncomment channel => 4, asterisk will not start.

Looking forward to any response!

(I have looked at very helpful post at
http://lists.digium.com/pipermail/asterisk-users/2005-March/090564.html with
no success)

-- 
Sean Browne
Cardiff IT Support Ltd
08456 442 551
http://www.cardiffitsupport.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060612/ac6a942d/attachment.htm