similar to: TDM01B Card Install Problems

Hello, I am trying the setup the TDM01B card. 1 FXO. I connected it to a regular home line. in the /etc/zaptel.conf, I have fxsls=4 In the /etc/asterisk/zapata.conf I have: signaling=fxs_ls language=en group=1 context=default channel => 4 When I start asterisk, I get this error: ERROR[10376]: chan_zap.c:6584 mkintf; Signaling requested on channel 4 is FXO Loopstart but line is in FXS

Hello If someone had the opportunity of trying those two analog cards, how do they compare? Digium's sells for $150 while OpenVox's sells for $95. Thanks.

The TDM01B is 4 port capable but has only 1 FXO module. I'm running asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B working. When I do the zttool it shows 4/1/0. I can dial out from a POTS phone up to the point that the cable plugs into the card. Here is my /etc/zaptel.conf loadzone=us fxsks=1 and here is my /etc/Zapata.conf [channels] language=en #include

Hi i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect my asterisk to a french analog line. In my zaptel.conf, i have: loadzone=fr defaultzone=fr fxols=3 when i load the module, i have in logs: Nov 24 06:13:40 gw kernel: Freed a Wildcard Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded Nov 24 06:13:40 gw zaptel: Removing zaptel module: succeeded Nov 24

Dear All, We (The Cardiff Institute of Infection and Immunity) are very keen to appoint a bioinformatician with a range of opportunities from 'simple' array analysis to aiding in the programming and analysis of novel data platforms. This is an Institutional, not just a project specific, appointment centred on the high quality Internationally-recognised Immunology research done in

Running the function below, tested using the cardiff dataset from splancs generates the following error. What changes do I need to make to get the function to work? Thanks. --Dale > gen.rpoints(events, poly, 99) > rpoints Error: object "rpoints" not found # test spatial data library(splancs) data(cardiff) attach(cardiff) str(cardiff) events <- as.points(x,y) ###

Hi, Updating zaptel gives me this during the make. Any ideas, the searches and Wiki gives me no hints. In file included from /usr/src/linux-2.4/include/linux/fs.h:19, from /usr/src/linux-2.4/include/linux/capability.h:17, from /usr/src/linux-2.4/include/linux/binfmts.h:5, from /usr/src/linux-2.4/include/linux/sched.h:9, from

Dear All, Having now successfully started using Sweave, I have just noticed an odd side effect with fonts. Using plain LaTeX, I have had no problems using \usepackage{palatino} or \usepackage{times} and the font correctly changes. However, once I convert the tex document into Snw, and run it through R CMD SWEAVE, LaTeX seems to ignore this package directive. The LaTeX log suggests the font

I'm looking for a way to use our implementation of HylaFax on Asterisk with Cardiff (an old installation of Cardiff document stuff). Is someone doing that? If no one has direct experience, is there a HylaFax client that emulates WinFax print-to-fax? --Don Don Kelly PCF Corp People Come First 651 842-1000 888 Don Kell(y) 651 842-1001 fax -------------- next part -------------- An

Dear all, I have been using the contrast library in my teaching for the last couple of years and am right in the middle of this year's round. In the last week R has been updated to version 2.14.0 on our computers. This has had the unfortunate effect of meaning the contrasts library no longer works, as the Design library is no longer available. I wonder if anyone has a fix for this...or

Dear list, I hope this is the right forum to ask. I have just downloaded and compiled R, but I get a segfault after I start R. make, make test/check, went OK. My system is linux-2.2.13 glibc-2.1.3 gcc 2.95.2 R-1.1.0 Here is a backtrace from gdb: (gdb) file /usr/local/lib/R/bin/R.bin Reading symbols from /usr/local/lib/R/bin/R.bin...done. (gdb) run Starting program: /usr/local/lib/R/bin/R.bin

Hello, I have configured my TDM01B Card (1 FXO Port ) as follows (below) but it will not pick up an incoming call. Any suggestions/tools to see what the problem is? I have looked at zttool where this line changes but I don't understand what it means (The last digit changed from 0 to 1) Total/Conf/Act: 4/ 1/ 1 /etc/zaptel.conf fxsks=4 loadzone=nl defaultzone=nl

I'm attempting to use an asterisk box with a Digium TDM01B as voicemail for an existing Meridian/Norstar PBX with an ATA-2 adapter. We're having problems where hangup is not always (but sometimes) detected. It's not detected probably 70% of the time or more. (The users transfer callers to an extension--caller then has to navigate a menu to get to the appropriate user). After

Hi, I'm trying to set up a basic FXO <> SIP gateway. That is, I want calls from my SIP phone to simply be dumped onto the POTS line. My (entire) extensions.conf is: [from-sip] exten => _9NXXXXXX,1,Dial(ZAP/1/${EXTEN}) and my zaptel.conf is: fxsks=1 loadzone=us defaultzone=us and my zapata.conf is: context=incoming signalling=fxs_ks echocancel=yes

I'm setting up a small office with about 8 SIP phones. Incoming and outgoing lines will be through IAX. We would also like to use an analog line for 911. Is the TDM01B a good option for this kind of configuration? Are there gotchas I'm missing? Finally, we would like to be able to use analog fax machines in the office. Would it make more sense to purchase the TDM400 card with 1 FXO

I have a couple SIP phones on a PIII 1Ghz 256MB * server with a TDM01B connected to the PSTN. Calls between SIP phones are clear. Calls to the PSTN are quite noisy. The other person does not hear noise but I hear quite a bit. It is not an annoying sound but definitely much noisier than typical PSTN or even cell phone calls. I believe I have a TDM400P REV H card. I definitely don't

Dear list, We have an weird problem with our FXO card (TDM01B). When I made a call using this channel, all goes well, the called phone rings but when the called phone answers the call. In me handset I can hear an weird sound like a "Clack". I tryed diferents TDM cards and modules, and my zapata.conf is like, language=en context=from-zaptel switchtype=national usecallerid=yes

I'm trying to setup a demo where my Asterisk box with a TDM01B (FXO) answers an incoming call and forwards that call to a SIP softphone (X-lite.) Seems all is built/installed okay: # ztcfg -vv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. I'm pretty new at this and the extensions.conf file is eating my

Hi Everyone. I have a client that uses an Altigen system. I am really new to PBX systems so all this is totally foreign to me. They currently have 5 inbound trunk lines and about 20 analog phones. >From what I can gather they are using the Altigen Quantum cards that support 8 extensions and 4 trunks. >From what I can gather the solution is a TDM04B and TDM01B to bring in the lines from

I'm trying dovecot-0.99.9.1 in place of uw-imap which ground to a halt on a 500MHz SunBlade 100 Solaris 8 system which acts as our Departmental mail server. INBOXes are mbox files on the servers's local SCSI disk. But user directories are auto mounted from other Sun NFS servers and these may contain other mbox mailboxes in a ~/Mail directory. There's a problem with creating (and with