Yes you can as long as you have at least the 1.0.2.13 firmware. I have
attached the template. The multi-purpose key settings are at the end.
On Fri, 2006-06-09 at 14:41, Daniel Salama wrote:> Is it possible to program the multi-purpose keys on a GXP-2000
> remotely via a TFTP configuration file? If so, what are the
> parameters to put in the configuration file?
>
> Thanks,
> Daniel
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
################################################################################################
## Configuration template for GXP-2000 firmware version 1.0.2.13
################################################################################################
##############################################################################
## Advanced/System-wide Options
##############################################################################
# Admin password for web interface
P2 = admin
# Silence Suppression. 0 - no, 1 - yes
P50 = 0
# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs
respectively)
P37 = 2
# Layer 3 QoS (IP Diff-Serv or Precedence value for RTP)
P38 = 48
# Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP)
P51 = 0
# Layer 2 QoS. 802.1p priority value (0 - 7)
P87 = 0
# No Key Entry Timeout. Default - 4 seconds.
P85 = 4
# Use # as Dial Key (if set to Yes, "#" will function as the
"(Re-)Dial" key). 0 - no, 1 - yes
P72 = 1
# Local RTP port (1024-65535, default 5004)
P39 = 5004
# Use Random Port. 0 - no, 1 - yes
P78 = 0
# Keep-alive interval (in seconds. default 20 seconds)
P84 = 20
# Use NAT IP. This will enable our SIP client to use this IP in the SIP
message. Example 64.3.153.50.
P101
# STUN server
P76 = stun.mycompany.com
#-------------------------------------------------------------
# Firmware Upgrade
#-------------------------------------------------------------
# Firmware Upgrade. 0 - TFTP Upgrade, 1 - HTTP Upgrade.
P212 = 0
# Firmware Server Path
P192
# Config Server Path
P237
# Firmware File Prefix
P232
# Firmware File Postfix
P233
# Config File Prefix
P234
# Config File Postfix
P235
# Allow DHCP Option 66 to override server. 0 - No, 1 - Yes. Default is No.
# When set to Yes(1), it will override the configured provision path and method.
P145 = 0
# Automatic Upgrade. 0 - No, 1 - Yes (checking every defined days). Default is
No.
P194 = 0
# Check for new firmware every () minutes, unit is in minute, default is 7 days.
P193 = 10080
# Use firmware pre/postfix to determine if f/w is required
# 0 = Always Check for New Firmware
# 1 = Check New Firmware only when F/W pre/suffix changes
P238 = 0
# DTMF Payload Type
P79 = 101
# Syslog Server (name of the server, max length is 64 charactors)
P207 =
# Syslog Level (Default setting is NONE)
# 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR
P208 = 0
# NTP Server
P30 = time.nist.gov
# Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is No.
# When set to Yes(1), it will override the configured NTP server.
P144 = 0
# Distinctive Ring Tone
# Use custom ring tone 1 if incoming caller ID is the following:
P105
# Use custom ring tone 2 if incoming caller ID is the following:
P106
# Use custom ring tone 3 if incoming caller ID is the following:
P107
# Disable Call Waiting. 0 - no, 1 - yes
P91 = 0
# Lock Keypad Update. 0 - no, 1 - yes
P88 = 0
####################################################################
# Primary Account (Account 1) Settings
####################################################################
# Account Active (In Use). 0 - no, 1 - yes
P271 = 1
# Account Name
P270
# SIP Server
P47 = sip.mycompany.com
# Outbound Proxy
P48 = proxy.mycompany.com
# SIP User ID
P35 = 8000
# Authenticate ID
P36 = 8000
# Authenticate password
P34 = 0000
# Display Name (John Doe)
P3 =
# Use DNS SRV. 0 - No, 1 - Yes.
P103 = 0
# SIP User ID is phone number. 0 - no, 1 - yes
P63 = 0
# SIP Registration. 0 - no, 1 - yes
P31 = 1
# Unregister On Reboot. 0 - no, 1 - yes
P81 = 0
# Register Expiration (in minutes. default 1 hour, max 45 days)
P32 = 60
# Local SIP port (default 5060)
P40 = 5060
# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P209 = 100
# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for
non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P250 = 400
# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P52 = 0
# SUBSCRIBE for MWI. (Whether or not send SUBSCRIBE for Message Waiting
Indication) 0 - No, 1 - Yes.
P99 = 0
# Proxy-Require (A SIP extension to enable firewall penetration)
P197
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P33
# Send DTMF. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P73 = 0
# Early Dial (use "Yes" only if proxy supports 484 response). 0 - no,
1 - yes
P29 = 0
# Dial Plan Prefix (dial plan prefix string).
P66
# Enable Call Features. 0 - no, 1 - yes
P191 = 1
# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1
- yes
P182 = 0
# Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535)
P260 = 180
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to
P260)
P261 = 90
# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P262 = 0
# Callee Request Timer (Request for timer when called. i.e. if remote party
supports timer but did not request for one) 0 - no, 1 - yes
P263 = 0
# Force Timer (Still use timer when remote party does not support timer) 0 - no,
1 - yes
P264 = 0
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote
party supports UPDATE) 0 - no, 1 - yes
P265 = 0
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P266 = 0
# UAS Specify Refresher. 1 - UAC, 2 - UAS
P267 = 1
# Enable 100rel. 0 - no, 1 - yes
P272 = 0
# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom
ring tone 2
# 3 - custom ring tone 3.
P104 = 0
# Send Anonymous (caller ID will be blocked if set to Yes). 0 - no, 1 - yes
P65 = 0
# Auto Answer. 0 - no, 1 - yes
P90 = 0
# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P298 = 0
# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P299 = 0
# Special Feature. 100 - Standard, 101 - Nortel MCS, 109 - RNK.
P198 = 100
#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------
# First codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P57 = 0
# Second codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P58 = 3
# Third codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P59 = 4
# Forth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P60 = 8
# Fifth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P61 = 18
# Sixth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P62 = 0
# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P46 = 0
# Eighth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P98 = 0
########################################################################
# SIP Account 2 Settings
########################################################################
# Account Active (In Use). 0 - no, 1 - yes
P401 = 0
#Account Name
P417 =
# SIP Server
P402
# Outbound Proxy Server
P403
# Account 2 SIP User ID
P404
# Authenticate ID
P405
# Authenticate Password
P406
# Display Name (John Doe)
P407
# Use DNS SRV. 0 - No, 1 - Yes.
P408 = 0
# User ID is phone number; "user=phone". 0 - no, 1 - yes
P409 = 0
# SIP Registration. 0 - no, 1 - yes
P410 = 1
# Unregister on Reboot. 0 - no, 1 - yes
P411 = 0
# Register Expiration (in minutes. default 1 hour, max 45 days)
P412 = 60
# SIP Local port (default 5062)
P413 = 5062
# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P440 = 100
# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for
non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P441 = 400
# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P414 = 0
# Subscribe MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication)
0 - No, 1 - Yes.
P415 = 0
# Proxy Require
P418
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P426
# Send DTMF method. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P416 = 0
# Early Dial. 0 - no, 1 - yes
P422 = 0
# Dial Plan Prefix
P419
# Enable Call Features. 0 - no, 1 - yes.
P420 = 1
# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1
- yes
P442 = 0
# Default Session Expires (in seconds. default 180 seconds. Allowed value:
90-65535)
P434 = 180
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to
P260)
P427 = 90
# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P428 = 0
# Callee Request Timer (Request for timer when called. i.e. if remote party
supports timer but did not request for one) 0 - no, 1 - yes
P429 = 0
# Force Timer (Still use timer when remote party does not support timer) 0 - no,
1 - yes
P430 = 0
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote
party supports UPDATE) 0 - no, 1 - yes
P431 = 0
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P432 = 0
# UAS Specify Refresher. 1 - UAC, 2 - UAS
P433 = 1
# Enable 100rel. 0 - no, 1 - yes
P435 = 0
# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom
ring tone 2
# 3 - custom ring tone 3.
P423 = 0
# Send Anonymous. 0 - no, 1 - yes
P421 = 0
# Auto Answer. 0 - no, 1 - yes.
P425 = 0
# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P438 = 0
# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P439 = 0
# Special Feature. 100 - Standard, 101 - Nortel MCS.
P424 = 100
#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------
# First codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P451 = 0
# Second codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P452 = 3
# Third codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P453 = 4
# Forth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P454 = 8
# Fifth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P455 = 18
# Sixth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P456 = 0
# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P457 = 0
# Eighth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P458 = 0
########################################################################
# SIP Account 3 Settings
########################################################################
# Account Active (In Use). 0 - no, 1 - yes
P501 = 0
# Account Name
P517
# SIP Server
P502
# Outbound Proxy Server
P503
# SIP User ID
P504
# Authenticate ID
P505
# Authenticate Password
P506
# Display Name (John Doe)
P507
# Use DNS SRV. 0 - No, 1 - Yes.
P508 = 0
# User ID is phone. "user=phone". 0 - no, 1 - yes
P509 = 0
# SIP Registration. 0 - no, 1 - yes
P510 = 1
# Unregister on Reboot. 0 - no, 1 - yes
P511= 0
# Register Expiration (in minutes. default 1 hour, max 45 days)
P512 = 60
# SIP Local port (default 5064)
P513 = 5064
# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P540 = 100
# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for
non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P541 = 400
# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P514 = 1
# Subscribe MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication)
0 - no, 1 - yes
P515 = 0
# Proxy Require
P518
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P526
# Send DTMF method. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P516 = 0
# Early Dial. 0 - no, 1 - yes
P522 = 0
# Dial Plan Prefix
P519
# Enable Call Features. 0 - no, 1 - yes.
P520 = 1
# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1
- yes
P542 = 0
# Default Session Expires (in seconds. default 180 seconds. Allowed value:
90-65535)
P534 = 180
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to
P260)
P527 = 90
# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P528
# Callee Request Timer (Request for timer when called. i.e. if remote party
supports timer but did not request for one) 0 - no, 1 - yes
P529
# Force Timer (Still use timer when remote party does not support timer) 0 - no,
1 - yes
P530
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote
party supports UPDATE) 0 - no, 1 - yes
P531
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P532 = 0
# UAS Specify Refresher. 1 - UAC, 2 - UAS
P533 = 1
# Enable 100rel. 0 - no, 1 - yes
P535 = 0
# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom
ring tone 2
# 3 - custom ring tone 3.
P523 = 0
# Send Anonymous
P521
# Auto Answer. 0 - no, 1 - yes.
P525 = 0
# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P538 = 0
# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P539 = 0
# Special Feature. 100 - Standard, 101 - Nortel MCS.
P524 = 100
#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------
# First codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P551 = 0
# Second codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P552 = 3
# Third codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P553 = 4
# Forth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P554 = 8
# Fifth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P555 = 18
# Sixth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P556 = 0
# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P557 = 0
# Eighth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P558 = 0
########################################################################
# SIP Account 4 Settings
########################################################################
# Account Active (In Use). 0 - no, 1 - yes
P601 = 0
#Account Name
P617 =
# SIP Server
P602
# Outbound Proxy Server
P603
# SIP User ID
P604
# Authenticate ID
P605
# Authenticate Password
P606
# Display Name (John Doe)
P607
# Use DNS SRV. 0 - no, 1 - yes.
P608 = 0
# User ID is phone number. "user=phone". 0 - no, 1 - yes
P609 = 0
# SIP Registration. 0 - no, 1 - yes
P610 = 1
# Unregister on Reboot. 0 - no, 1 - yes
P611 = 0
# Register Expiration (in minutes. default 1 hour, max 45 days)
P612 = 60
# SIP Local port (default 5066)
P613 = 5066
# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P640 = 100
# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for
non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P641 = 400
# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P614 = 1
# Subscribe MWI. Whether or not send SUBSCRIBE for Message Waiting Indication.
0 - no, 1 - yes
P615 = 0
# Proxy Require
P618
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P626
# Send DTMF method. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P616 = 0
# Early Dial. 0 - no, 1 - yes
P622 = 0
# Dial Plan Prefix
P619
# Enable Call Features. 0 - no, 1 - yes.
P620 = 1
# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1
- yes
P642 = 0
# Default Session Expires (in seconds. default 180 seconds. Allowed value:
90-65535)
P634
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to
P260)
P627
# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P628
# Callee Request Timer (Request for timer when called. i.e. if remote party
supports timer but did not request for one) 0 - no, 1 - yes
P629
# Force Timer (Still use timer when remote party does not support timer) 0 - no,
1 - yes
P630
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote
party supports UPDATE) 0 - no, 1 - yes
P631
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P632 = 0
# UAS Specify Refresher. 1 - UAC, 2 - UAS
P633 = 1
# Enable 100rel. 0 - no, 1 - yes
P635 = 0
# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom
ring tone 2
# 3 - custom ring tone 3.
P623 = 0
# Send Anonymous. 0 - no, 1 - yes
P621 = 0
# Auto Answer. 0 - no, 1 - yes.
P625 = 0
# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P638 = 0
# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P639 = 0
# Special Feature. 100 - Standard, 101 - Nortel MCS.
P624 = 100
#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------
# First codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P651 = 0
# Second codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P652 = 3
# Third codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P653 = 4
# Forth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P654 = 8
# Fifth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P655 = 18
# Sixth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P656 = 0
# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P657 = 0
# Eighth codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P658 = 0
################################################################################
# End User Settings. Please do not edit this section.
################################################################################
# End User Password
#P196 = 123
# DHCP support. 0 - yes, 1 - no
#P8 = 0
# PPPoE support. PPPoE user ID
#P82
# PPPoE password
#P83
# Host name, DHCP option 12. Max length allowed is 32 bytes.
P146
# Domain name, DHCP option 15. Max length allowed is 32 bytes.
P147
# Vendor Class ID, DHCP option 60. Max length allowed is 32 bytes.
P148 =
# IP Address. Ignore if DHCP or PPPoE is used
#P9 = 192
#P10 = 168
#P11 = 0
#P12 = 1
# Subnet mask. Ignore if DHCP or PPPoE is used
#P13 = 255
#P14 = 255
#P15 = 255
#P16 = 0
# Router. Ignore if DHCP or PPPoE is used
#P17 = 192
#P18 = 168
#P19 = 1
#P20 = 1
# Use this DNS server. (if specified).
#P92 = 192
#P93 = 168
#P94 = 0
#P95 = 2
# DNS 1. Ignore if DHCP or PPPoE is used
#P21 = 192
#P22 = 168
#P23 = 0
#P24 = 1
# DNS 2. Ignore if DHCP or PPPoE is used
#P25 = 0
#P26 = 0
#P27 = 0
#P28 = 0
#--------------------------------------------------------------------------
# End User Multi Purpose Keys
#--------------------------------------------------------------------------
# Multi Purpose Key 1
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P323
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P301
# Name
P302
# UserID
P303
# Multi Purpose Key 2
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P324
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P304
# Name
P305
# UserID
P306
# Multi Purpose Key 3
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P325 =
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P307
# Name
P308
# UserID
P309
# Multi Purpose Key 4
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P326
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P310
# Name
P311
# UserID
P312
# Multi Purpose Key 5
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P327 =
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P313
# Name
P314
# UserID
P315
# Multi Purpose Key 6
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P328 =
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P316
# Name
P317
# UserID
P318
# Multi Purpose Key 7
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P329 =
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P319
# Name
P320
# UserID
P321
#-----------------------------------------------------------------------------
# End User Time settings
#-----------------------------------------------------------------------------
# Time Zone. Offset in minutes to GMT
P64 = 420
# Allow DHCP Option 2 to override Time Zone setting. 0 - No, 1 - Yes.
# When set to Yes(1), it will override the configured Time Zone setting if
available.
P143 = 0
# Daylight Savings Time. 0 - no, 1 - yes
P75 = 0
# LCD Backlight Always On. 0 - no, 1 - yes
P322 = 0
# Time Display Format. 0 - 12 Hour, 1 - 24 Hour
P122 = 0
# Date Display Format. 0 - Year-Month-Day, 1 - Month-Day-Year, 2 -
Day-Month-Year
P102 = 0
# Display Clock instead of Date. 0 - no, 1 - yes
P123 = 0
# Device Mode. 0 - Switch, 1 - NAT/Router. Default is 0.
P231 = 0
# WAN side http access. 0 - Disable(default), 1 - Yes.
P190 = 0
# Reply to ICMP on WAN port. 0 - No, 1 - Yes. Unit will not respond to PING from
WAN side if set to No.
P189 = 0
#Cloned WAN MAC Address.
#P115 #P116 #P117 #P118 #P119 #P120
#LAN Subnet Mask. Default is 255.255.255.0.
#P110 =
#LAN Base/Gateway/Router IP for the LAN port, default is 192.168.2.1.
#P111 =
#DHCP IP Lease Time, in units of hours, default is 120 hours or 5 days.
#P112 = 120
#DMZ IP.
#P113
#-----------------------------------------------------------
# Port Forwarding Settings.
#-----------------------------------------------------------
############# Choice 1 ####################################
# WAN Port
P150 # LAN IP
P158 # LAN Port
P166 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P174 ############# Choice 2 ####################################
# WAN Port
P151 # LAN IP
P159 # LAN Port
P167 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P175 ############# Choice 3 ####################################
# WAN Port
P152 # LAN IP
P160 # LAN Port
P168 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P176 ############# Choice 4 ####################################
# WAN Port
P153 # LAN IP
P161 # LAN Port
P169 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P177 ############# Choice 5 ####################################
# WAN Port
P154 # LAN IP
P162 # LAN Port
P170 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P178 ############# Choice 6 ####################################
# WAN Port
P155 # LAN IP
P163 # LAN Port
P171 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P179 ############# Choice 7 ####################################
# WAN Port
P156 # LAN IP
P164 # LAN Port
P172 # Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P180 ############# Choice 8 ####################################
# WAN Port
P157 =
# LAN IP
P165 =
# LAN Port
P173 =
# Protocol. 0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P181 =