asterisk users - Apr 2006 - PANASONIC KX-TS208W - Speakerphone Incompatible With Asterisk 1.2.3

I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W - Speakerphone does not
work with it. It works fine when you pick up the handset. Anyone experinced this
problem before, the speaker works fine with Verizon line. The phone is behind a
Linsys router RT31P2.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060422/a3856854/attachment.htm

broadbandvoice@comcast.net wrote:
> I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W - Speakerphone does 
> not work with it. It works fine when you pick up the handset. Anyone 
> experinced this problem before, the speaker works fine with Verizon 
> line. The phone is behind a Linsys router RT31P2.
> Replace the batteries! Alkaline only, replace every 6 months
> 1.2.3 is also defective for other reasons. Upgrade
> Using a TDM400, an ATA or ??
> The phone works best with a 48V 20mA or better loop, so the FXS source 
> voltage  may have an effect, and this cheap phone has no previsions 
> for external power.
>
> John Novack

Thanks for the response, I'll ask the client to change batteries, though it
is a new phone less than two weeks. is there any reason why the Lanline(Verizon)
work and not the Asterisk? The only differences is the Asterisk, Linksys router
and the DSL modem. One of these 3 should be interfering.

-------------- Original message -------------- 
From: John Novack <jnovack@stromberg-carlson.org> 
> 
> 
> 
> 
> broadbandvoice@comcast.net wrote: 
> 
> > I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W - Speakerphone
does
> > not work with it. It works fine when you pick up the handset. Anyone 
> > experinced this problem before, the speaker works fine with Verizon 
> > line. The phone is behind a Linsys router RT31P2. 
> > Replace the batteries! Alkaline only, replace every 6 months 
> > 1.2.3 is also defective for other reasons. Upgrade 
> > Using a TDM400, an ATA or ?? 
> > The phone works best with a 48V 20mA or better loop, so the FXS source
> > voltage may have an effect, and this cheap phone has no previsions 
> > for external power. 
> > 
> > John Novack 
> 
> 
> _______________________________________________ 
> --Bandwidth and Colocation provided by Easynews.com -- 
> 
> Asterisk-Users mailing list 
> To UNSUBSCRIBE or update options visit: 
> http://lists.digium.com/mailman/listinfo/asterisk-users 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060422/8848e8cb/attachment.htm