Hi Folks,
I am running a SPA-3000 behind a legacy PABX on an analog line.
I have been able to set up a dial plan that sends outgoing calls out
to the appropriate VSP depending on prefix, and that part and the
incoming call handling works fine.
I am now trying to implement call pickup (dial 6*) or manual call
forwarding (flash, dial extension).
On the first of these I have worked out how to get the 6* sent to
the PSTN line - I had to allow the * to be dialed by changing the
Dial Plan specified in "Line 1 VoIP Caller DP" on the PSTN Line
tab from (xx.) to ([x#*].) but still no dice.
The Line 1 dial plan includes "6*S0<:@gw0>" and from traces
and various utilities I have concluded the digits are dialed to the
PSTN line...
Is there something else that need to be done to tell the SPA-3000
to connect after dialing? Any links or hints on working behind a
PABX like this would be most welcome.
I had to alter the "Line-In-Use Voltage" to 16 V to let the SPA
work with our PABX but I'm hoping that is not related...
Cheers, Dieter.
