Sam Lee
2006-Feb-09 04:14 UTC
[Asterisk-Users] SPA-3000 VOIP-PSTN gateway - longdelaybetweenanswering and ringing
You can even set it to zero. Mine works well when in zero. The line pick up immediately :> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chris Stenton Sent: Thursday, February 09, 2006 6:57 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SPA-3000 VOIP-PSTN gateway - longdelaybetweenanswering and ringing What have you set the PSTN Dialing Delay: on the PSTN Line tab (logged in as admin advanced) ? Mine is set to 1 and it works well. Chris ----- Original Message ----- From: "Anthony Rodgers" <Anthony_Rodgers@dnv.org> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Wednesday, February 08, 2006 9:50 PM Subject: Re: [Asterisk-Users] SPA-3000 VOIP-PSTN gateway - long delaybetweenanswering and ringing> Hi Jean-Michel, > > We did actually try the 'r' option, but it has no effect, as Asterisk > will only supply ringing until the dialed SIP extension answers, which > it does immediately. The 4 second delay occurs between when the > SPA-3000 answers the SIP call and then places the PSTN one. I believe > that the ringing tone is provided by the PSTN at that point. > > Regards, > -- > Anthony Rodgers > Business Systems Analyst > District of North Vancouver > Web: http://www.dnv.org > RSS Feed: http://www.dnv.org/rss.asp > > > On Feb 8, 2006, at 1:41 PM, Jean-Michel Hiver wrote: > >> Anthony Rodgers a ?crit : >> >> > Greetings, >> > >> > We are currently testing a Sipura SPA-3000 as a gateway from our >> > Asterisk system to a PSTN line for 911 access. We have a number of >> > locations and want to place an SPA-3000 in each, connected to a >> > PSTN line that will provide the correct ANI/ALI information to 911 >> > for >> each >> > location. >> > >> > It all works great, except for a reasonably significant (4 seconds) >> > delay between when the SPA-3000 answers the SIP call from the >> Asterisk >> > server (immediately upon dialing, according to the Asterisk CLI) >> > and the ringing tone begins (the remote phone begins ringing at >> > that same time). >> > >> > The delay is enough for users to think that the phone isn't working >> > - not what you want for 911! >> > >> > Any ideas? >> >> You could use the 'r' flag in your Dial() command to simulate a >> ringing tone instantly. This is less than ideal though. Have you done >> some SIP traces (using ngrep for examples) to look when the SIP >> 'ringing' signal is actually being sent? >> >> Cheers, >> Jean-Michel. >> >> -- >> Jean-Michel Hiver - http://ykoz.net/ >> D?couvrez la R?union des Technologies IP & Telecom >> TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE >> >> >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> Asterisk-Users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Chris Stenton
2006-Feb-09 04:32 UTC
[Asterisk-Users] SPA-3000 VOIP-PSTN gateway -longdelaybetweenanswering and ringing
I had problems with it set to 0 for some reason but that was a very early firmware for the device. Chris ----- Original Message ----- From: "Sam Lee" <sam.lee@super.net.sg> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Thursday, February 09, 2006 11:14 AM Subject: RE: [Asterisk-Users] SPA-3000 VOIP-PSTN gateway -longdelaybetweenanswering and ringing> You can even set it to zero. Mine works well when in zero. The line pick > up immediately :> > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chris > Stenton > Sent: Thursday, February 09, 2006 6:57 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SPA-3000 VOIP-PSTN gateway - > longdelaybetweenanswering and ringing > > What have you set the > > PSTN Dialing Delay: > > on the PSTN Line tab (logged in as admin advanced) ? > > Mine is set to 1 and it works well. > > Chris > > ----- Original Message ----- > From: "Anthony Rodgers" <Anthony_Rodgers@dnv.org> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <asterisk-users@lists.digium.com> > Sent: Wednesday, February 08, 2006 9:50 PM > Subject: Re: [Asterisk-Users] SPA-3000 VOIP-PSTN gateway - long > delaybetweenanswering and ringing > > >> Hi Jean-Michel, >> >> We did actually try the 'r' option, but it has no effect, as Asterisk >> will only supply ringing until the dialed SIP extension answers, which >> it does immediately. The 4 second delay occurs between when the >> SPA-3000 answers the SIP call and then places the PSTN one. I believe >> that the ringing tone is provided by the PSTN at that point. >> >> Regards, >> -- >> Anthony Rodgers >> Business Systems Analyst >> District of North Vancouver >> Web: http://www.dnv.org >> RSS Feed: http://www.dnv.org/rss.asp >> >> >> On Feb 8, 2006, at 1:41 PM, Jean-Michel Hiver wrote: >> >>> Anthony Rodgers a ?crit : >>> >>> > Greetings, >>> > >>> > We are currently testing a Sipura SPA-3000 as a gateway from our >>> > Asterisk system to a PSTN line for 911 access. We have a number of >>> > locations and want to place an SPA-3000 in each, connected to a >>> > PSTN line that will provide the correct ANI/ALI information to 911 >>> > for >>> each >>> > location. >>> > >>> > It all works great, except for a reasonably significant (4 seconds) >>> > delay between when the SPA-3000 answers the SIP call from the >>> Asterisk >>> > server (immediately upon dialing, according to the Asterisk CLI) >>> > and the ringing tone begins (the remote phone begins ringing at >>> > that same time). >>> > >>> > The delay is enough for users to think that the phone isn't working >>> > - not what you want for 911! >>> > >>> > Any ideas? >>> >>> You could use the 'r' flag in your Dial() command to simulate a >>> ringing tone instantly. This is less than ideal though. Have you done >>> some SIP traces (using ngrep for examples) to look when the SIP >>> 'ringing' signal is actually being sent? >>> >>> Cheers, >>> Jean-Michel. >>> >>> -- >>> Jean-Michel Hiver - http://ykoz.net/ >>> D?couvrez la R?union des Technologies IP & Telecom >>> TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE >>> >>> >>> _______________________________________________ >>> --Bandwidth and Colocation provided by Easynews.com -- >>> >>> Asterisk-Users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> Asterisk-Users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >