asterisk users - Jan 2006 - Same Zap channel in multiple groups

Does anyone know if it would cause problems to have the same Zap channel in
multiple goups?  So, for example, if I have two PRIs would the following
work or would it cause problems:

channel => 1-23
group => 1

channel => 25-47
group => 2

channel => 1-23,25-47
group => 3

I am just curious if anyone has set some thing like this up and how it
worked out.

Thanks,
Patrick
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060109/bbd1b430/attachment.htm

Patrick Conroy wrote:
> Does anyone know if it would cause problems to have the same Zap channel in
> multiple goups?  So, for example, if I have two PRIs would the following
> work or would it cause problems:
The internal structures in chan_zap can only store one group association 
for each channel. If you try to configure it this way, only the last 
defined group will 'win'.

On Mon, Jan 09, 2006 at 10:44:58AM -0500, Patrick Conroy
wrote:
> Does anyone know if it would cause problems to have the same Zap channel in
> multiple goups?  So, for example, if I have two PRIs would the following
> work or would it cause problems:
> 
> channel => 1-23
> group => 1
> 
> channel => 25-47
> group => 2
> 
> channel => 1-23,25-47
> group => 3
BTW: I suppose you wanted to write:

group => 1
channel => 1-23

group => 2
channel => 25-47

group => 3
channel => 1-23,25-47
> 
> I am just curious if anyone has set some thing like this up and how it
> worked out.
I figure all would be in group 3, but I'm not sure.

-- 
Tzafrir Cohen         | tzafrir@jbr.cohens.org.il | VIM is
http://tzafrir.org.il |                           | a Mutt's  
tzafrir@cohens.org.il |                           |  best
ICQ# 16849755         |                           | friend

On Mon, January 9, 2006 16:44, Patrick Conroy said:
> Does anyone know if it would cause problems to have the same Zap channel
> in
> multiple goups?  So, for example, if I have two PRIs would the following
> work or would it cause problems:
>
> channel => 1-23
> group => 1
>
> channel => 25-47
> group => 2
>
> channel => 1-23,25-47
> group => 3
>
> I am just curious if anyone has set some thing like this up and how it
> worked out.
>
> Thanks,
> Patrick
>
AFAIK

group => 1,3
channel => 1-23

group => 2,3
channel => 25-47

should work...

-- 
F Peeters
  PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
  2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
    Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
  AMD Duron 1GHz - 1GB - * 1.2.1
  2 Sweex HFC-PCI cards