Hi All Apologises if this has been disussed and I missed it. My SetUp I have a sip phone registered to an asterisk box (a1) in one location 1. This phone dials an extension which is in another location, so a1 passes the call via IAX to the other asterisk (a2) in location 2 which then dials the local phone. My Problem The caller ID setup in the sip.conf for the phone registered to a1 is not passed via the IAX to a2 and is therefor not being displayed on the phone in location2. The only way I can get the phone in location2 to display the caller ID is to set the callerid in the user part in the iax.conf on a2. Hope this makes sense Many thanks Scott Pinhorne
Good to know its not just me then. Thanks Scott -----Original message----- From: "Francesco Peeters (Asterisk)" francesco@fampeeters.com Date: Wed, 11 Jan 2006 07:18:30 -0600 To: "Asterisk Users Mailing List - Non-Commercial Discussion" asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] IAX & CallerID> On Wed, January 11, 2006 7:52, scott said: > > Hi All > > > > Apologises if this has been disussed and I missed it. > > > > My SetUp > > I have a sip phone registered to an asterisk box (a1) in one location 1. > > This phone dials an extension which is in another location, so a1 passes > > the call via IAX to the other asterisk (a2) in location 2 which then dials > > the local phone. > > > > My Problem > > The caller ID setup in the sip.conf for the phone registered to a1 is not > > passed via the IAX to a2 and is therefor not being displayed on the phone > > in location2. The only way I can get the phone in location2 to display the > > caller ID is to set the callerid in the user part in the iax.conf on a2. > > > > Hope this makes sense > > Many thanks > > It sure does, as I am examining exactly the same issue for my set up... > > -- > F Peeters > PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch > 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 > Cologne HFC-S pins #52, #54, #55 connected in parallel for synching. > AMD Duron 1GHz - 1GB - * 1.2.1 > 2 Sweex HFC-PCI cards > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
On Wed, January 11, 2006 7:52, scott said:> Hi All > > Apologises if this has been disussed and I missed it. > > My SetUp > I have a sip phone registered to an asterisk box (a1) in one location 1. > This phone dials an extension which is in another location, so a1 passes > the call via IAX to the other asterisk (a2) in location 2 which then dials > the local phone. > > My Problem > The caller ID setup in the sip.conf for the phone registered to a1 is not > passed via the IAX to a2 and is therefor not being displayed on the phone > in location2. The only way I can get the phone in location2 to display the > caller ID is to set the callerid in the user part in the iax.conf on a2. > > Hope this makes sense > Many thanksIt sure does, as I am examining exactly the same issue for my set up... -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 Cologne HFC-S pins #52, #54, #55 connected in parallel for synching. AMD Duron 1GHz - 1GB - * 1.2.1 2 Sweex HFC-PCI cards
As a rule of thumb, I always explicitly set CallerID in my dialplan before making a call through IAX, SIP or PSTN. If you make it part of a generic dialout routine then it isn't a hassle. It always works. -----Original Message----- From: scott [mailto:scott@mysecretworld.co.uk] Sent: Wednesday, January 11, 2006 12:28 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] IAX & CallerID Good to know its not just me then. Thanks Scott -----Original message----- From: "Francesco Peeters (Asterisk)" francesco@fampeeters.com Date: Wed, 11 Jan 2006 07:18:30 -0600 To: "Asterisk Users Mailing List - Non-Commercial Discussion" asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] IAX & CallerID> On Wed, January 11, 2006 7:52, scott said: > > Hi All > > > > Apologises if this has been disussed and I missed it. > > > > My SetUp > > I have a sip phone registered to an asterisk box (a1) in one location 1. > > This phone dials an extension which is in another location, so a1passes> > the call via IAX to the other asterisk (a2) in location 2 which thendials> > the local phone. > > > > My Problem > > The caller ID setup in the sip.conf for the phone registered to a1 isnot> > passed via the IAX to a2 and is therefor not being displayed on thephone> > in location2. The only way I can get the phone in location2 to displaythe> > caller ID is to set the callerid in the user part in the iax.conf on a2. > > > > Hope this makes sense > > Many thanks > > It sure does, as I am examining exactly the same issue for my set up... > > -- > F Peeters > PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch > 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 > Cologne HFC-S pins #52, #54, #55 connected in parallel for synching. > AMD Duron 1GHz - 1GB - * 1.2.1 > 2 Sweex HFC-PCI cards > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users