Unfourtunatley, mISDN is far from production quality. So going miSDN->CAPI->chan_capi might not work. chan_misdn is even more flakey at the moment. Your best option is to use just CAPI and chan_capi,it had support for fritz On 10/09/05, Jon Dean <jtw.dean@gmail.com> wrote:> A plea to all! > > Has anyone had any success with two or more avm fritz pci cards with either > misdn, chan_misdn, or chan_capi, and any version of linux 2.6.x? > > I have managed to get misdn to load under 2.6.13 and detect two cards using > misdn-capi and chan-capi (using capiinfo and capi info under asterisk) - but > the second card/controller doesn't answer or dial calls. > > But if I try misdn without capi I get the following error > > mISDN: INTERNAL ERROR in drivers/isdn/hardware/mISDN/stack.c:596 > > > Any help would be greatly appreciated. > > Jon > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- Konrads Smelkovs Applied IT sorcery.
Jon Dean wrote:> A plea to all! > > Has anyone had any success with two or more avm fritz pci cards with either > misdn, chan_misdn, or chan_capi, and any version of linux 2.6.x? > > I have managed to get misdn to load under 2.6.13 and detect two cards using > misdn-capi and chan-capi (using capiinfo and capi info under asterisk) - but > the second card/controller doesn't answer or dial calls. > > But if I try misdn without capi I get the following error > > mISDN: INTERNAL ERROR in drivers/isdn/hardware/mISDN/stack.c:596 >I have two Billions PCI cards and am using chan_misdn-0.1.1 and kernel 2.6.11. I haven't yet been successful at using the second card, but it's still work in progress. However, I got the above error and resolved it by specifying the parameters for both cards when I loaded the relevant driver. In my case: modprobe hfcpci protocol=0x2,0x12 layermaster=0xf,0x3 (the first card is in TE mode the second in NT mode) Hope this helps. John
A plea to all! Has anyone had any success with two or more avm fritz pci cards with either misdn, chan_misdn, or chan_capi, and any version of linux 2.6.x? I have managed to get misdn to load under 2.6.13 and detect two cards using misdn-capi and chan-capi (using capiinfo and capi info under asterisk) - but the second card/controller doesn't answer or dial calls. But if I try misdn without capi I get the following error mISDN: INTERNAL ERROR in drivers/isdn/hardware/mISDN/stack.c:596 Any help would be greatly appreciated. Jon
Derek, I've got up to 3 Fritz cards (of different types) up and running on my debian sarge (2.6.8 kernel). That's how it should work: - build and install mISDN and chan_misdn from the current install-misdn.tar.gz which can be downloaded from http://www.beronet.com/download/ - use the chan_misdn and change /etc/asterisk/misdn.conf according to your special config - be sure that no capi modules are loaded - do "/etc/init.d/misdn-init config" to automatically create /etc/misdn-init.conf - start the cards: "/etc/init.d/misdn-init start" - start your * and check if chan_misdn.so started properly Hope it helps Cheers J?rg> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Derek Conniffe > Sent: Friday, September 30, 2005 10:39 AM > To: konrads.smelkovs@gmail.com; Asterisk Users Mailing List - > Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Fritz, mISDN, Help > > I big problem (for me) is that it seems that the AVM Fritz > CAPI drivers cannot support more than one PCI card per > server. There is a hack out there for multiple cards and a > 2.4.XX kernel but this is not supported for the 2.6.XX kernels. > > mISDN on the other hand does support multiple AVM Fritz cards > but I couldn't seem to get mISDN -> CAPI -> chan_capi working > right (I tried for hours and I can't remember what exactly > the problem was now - everything did load OK but calls were > not being received correctly I think). I didn't try using chan_misdn. > > Now I'm running a solution which does not make me happy at > all - I've got a second asterisk box beside the main one for > the other AVM Fritz ISDN card and sending the received calls > over via. IAX2 to the primary server (I shudder when I think > of the waste of electricity). > > Is anyone out there running two AVM Fritz ISDN cards? Are > you using a 2.6.XX kernel? How are you doing it? > > Thanks, > > Derek > > > > Konrads Smelkovs wrote: > > >Unfourtunatley, mISDN is far from production quality. So going > >miSDN->CAPI->chan_capi might not work. chan_misdn is even more flakey > >at the moment. > > > >Your best option is to use just CAPI and chan_capi,it had > support for > >fritz > > > >On 10/09/05, Jon Dean <jtw.dean@gmail.com> wrote: > > > > > >>A plea to all! > >> > >>Has anyone had any success with two or more avm fritz pci > cards with > >>either misdn, chan_misdn, or chan_capi, and any version of > linux 2.6.x? > >> > >>I have managed to get misdn to load under 2.6.13 and detect > two cards > >>using misdn-capi and chan-capi (using capiinfo and capi info under > >>asterisk) - but the second card/controller doesn't answer > or dial calls. > >> > >>But if I try misdn without capi I get the following error > >> > >>mISDN: INTERNAL ERROR in drivers/isdn/hardware/mISDN/stack.c:596 > >> > >> > >>Any help would be greatly appreciated. > >> > >>Jon > >>_______________________________________________ > >>--Bandwidth and Colocation sponsored by Easynews.com -- > >> > >>Asterisk-Users mailing list > >>Asterisk-Users@lists.digium.com > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >>To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > > > > > > > > > > > -- > Derek Conniffe > Rivertower Ltd > DID Number: 01 440 1806 (International: 00 353 1 440 1806) > Ireland: (Freephone) 1800 719 400 > Ireland: (Local) 01 440 1800 > United Kingdom: 0870 068 2368 > International: 00 353 1 440 1800 > Derek Conniffe Mobile: 086 856 3823 (International: 00 353 86 > 856 3823) > Fax: 01 201 0085 (International: 00 353 1 201 0085) > Email: Derek@rivertower.ie > Web: http://www.rivertowerhosting.com > >
Hi Derek, well, don't know anything about the SMP warning, in my case there's a simliar warning regarding PREEMPTIBLE setting which I simply ignored... You might also have a look onto this: http://bugs.digium.com/view.php?id=4077 Crossing fingers... cheers J?rg> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Derek Conniffe > Sent: Friday, September 30, 2005 12:48 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Fritz, mISDN, Help > > Hi again J?rg, > > The install_misdn Makefile doesn't seem to like my SMP "yes" > in my kernel .config (it does a grep on the .config file, > finds the line, and tells me) - I'm going to try the > chan_misdn driver anyway and the server is an old HP > netserver e800 which is a dual processor PIII board. > Actually I'm only running one processor in it because, for > reasons unknown to me, SuSE linux (9.1) grinds to almost a > halt with two processors on board but I'd say I need to SMP > option on in the kernel config in order to use this > motherboard (although I'm not against changing the > motherboard if necessary). > > I'll let you know how I get on, > > Derek > > J?rg Wolf wrote: > > >Derek, > > > >I've got up to 3 Fritz cards (of different types) up and > running on my debian sarge (2.6.8 kernel). > > > >That's how it should work: > >- build and install mISDN and chan_misdn from the current > >install-misdn.tar.gz which can be downloaded from > >http://www.beronet.com/download/ > >- use the chan_misdn and change /etc/asterisk/misdn.conf > according to > >your special config > >- be sure that no capi modules are loaded > >- do "/etc/init.d/misdn-init config" to automatically create > >/etc/misdn-init.conf > >- start the cards: "/etc/init.d/misdn-init start" > >- start your * and check if chan_misdn.so started properly > > > >Hope it helps > > > >Cheers > >J?rg > > > > > > > >>-----Original Message----- > >>From: asterisk-users-bounces@lists.digium.com > >>[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Derek > >>Conniffe > >>Sent: Friday, September 30, 2005 10:39 AM > >>To: konrads.smelkovs@gmail.com; Asterisk Users Mailing List - > >>Non-Commercial Discussion > >>Subject: Re: [Asterisk-Users] Fritz, mISDN, Help > >> > >>I big problem (for me) is that it seems that the AVM Fritz CAPI > >>drivers cannot support more than one PCI card per server. > There is a > >>hack out there for multiple cards and a 2.4.XX kernel but > this is not > >>supported for the 2.6.XX kernels. > >> > >>mISDN on the other hand does support multiple AVM Fritz cards but I > >>couldn't seem to get mISDN -> CAPI -> chan_capi working > right (I tried > >>for hours and I can't remember what exactly the problem was now - > >>everything did load OK but calls were not being received > correctly I > >>think). I didn't try using chan_misdn. > >> > >>Now I'm running a solution which does not make me happy at > all - I've > >>got a second asterisk box beside the main one for the other > AVM Fritz > >>ISDN card and sending the received calls over via. IAX2 to > the primary > >>server (I shudder when I think of the waste of electricity). > >> > >>Is anyone out there running two AVM Fritz ISDN cards? Are > you using a > >>2.6.XX kernel? How are you doing it? > >> > >>Thanks, > >> > >>Derek > >> > >> > >> > >>Konrads Smelkovs wrote: > >> > >> > >> > >>>Unfourtunatley, mISDN is far from production quality. So going > >>>miSDN->CAPI->chan_capi might not work. chan_misdn is even > more flakey > >>>at the moment. > >>> > >>>Your best option is to use just CAPI and chan_capi,it had > >>> > >>> > >>support for > >> > >> > >>>fritz > >>> > >>>On 10/09/05, Jon Dean <jtw.dean@gmail.com> wrote: > >>> > >>> > >>> > >>> > >>>>A plea to all! > >>>> > >>>>Has anyone had any success with two or more avm fritz pci > >>>> > >>>> > >>cards with > >> > >> > >>>>either misdn, chan_misdn, or chan_capi, and any version of > >>>> > >>>> > >>linux 2.6.x? > >> > >> > >>>>I have managed to get misdn to load under 2.6.13 and detect > >>>> > >>>> > >>two cards > >> > >> > >>>>using misdn-capi and chan-capi (using capiinfo and capi info under > >>>>asterisk) - but the second card/controller doesn't answer > >>>> > >>>> > >>or dial calls. > >> > >> > >>>>But if I try misdn without capi I get the following error > >>>> > >>>>mISDN: INTERNAL ERROR in drivers/isdn/hardware/mISDN/stack.c:596 > >>>> > >>>> > >>>>Any help would be greatly appreciated. > >>>> > >>>>Jon > >>>>_______________________________________________ > >>>>--Bandwidth and Colocation sponsored by Easynews.com -- > >>>> > >>>>Asterisk-Users mailing list > >>>>Asterisk-Users@lists.digium.com > >>>>http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>To UNSUBSCRIBE or update options visit: > >>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>> > >>>> > >>>> > >>>> > >>>> > >>> > >>> > >>> > >>> > >>-- > >>Derek Conniffe > >>Rivertower Ltd > >>DID Number: 01 440 1806 (International: 00 353 1 440 1806) > >>Ireland: (Freephone) 1800 719 400 > >>Ireland: (Local) 01 440 1800 > >>United Kingdom: 0870 068 2368 > >>International: 00 353 1 440 1800 > >>Derek Conniffe Mobile: 086 856 3823 (International: 00 353 86 > >>856 3823) > >>Fax: 01 201 0085 (International: 00 353 1 201 0085) > >>Email: Derek@rivertower.ie > >>Web: http://www.rivertowerhosting.com > >> > >> > >> > >> > >_______________________________________________ > >--Bandwidth and Colocation sponsored by Easynews.com -- > > > >Asterisk-Users mailing list > >Asterisk-Users@lists.digium.com > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > -- > Derek Conniffe > Rivertower Ltd > DID Number: 01 440 1806 (International: 00 353 1 440 1806) > Ireland: (Freephone) 1800 719 400 > Ireland: (Local) 01 440 1800 > United Kingdom: 0870 068 2368 > International: 00 353 1 440 1800 > Derek Conniffe Mobile: 086 856 3823 (International: 00 353 86 > 856 3823) > Fax: 01 201 0085 (International: 00 353 1 201 0085) > Email: Derek@rivertower.ie > Web: http://www.rivertowerhosting.com > >