We're having a problem with an E1 trunk in Mexico into an IVR server and
would appreciate any suggestions.
Hardware: Digium TE110P jumpered for E1
zaptel.conf:
span=1,1,0,ccs,hdb3
# clear=1-30
bchan=1-15
bchan=17-31
dchan=16
loadzone = us
defaultzone=us
Circuit status is fine: Status: Provisioned, Up, Active
Calls are accepted by Asterisk without any errors/alarms.
Audio from Asterisk (i.e. playback of pre-recorded sounds is fine).
Audio to Asterisk (i.e. sounds and DTMF from people calling Asterisk
over the E1) sound as if played back on a tape recorder running at
half-speed -- slow and down an octave.
What could be causing this?
--
George Pajari, netVOICE communications 604 484 VOIP (484 8647 x102)
Open Source VoIP/Telephony Specialists 1 877 NET VOIP (638 8647 x102)
www.netvoice.ca www.ip-centrex.ca
www.digium.ca www.grandstream.ca www.sipura.ca www.snom.ca
