search for: jumpered

Displaying 20 results from an estimated 179 matches for "jumpered".

Did you mean: jumped
2006 Feb 28
2
run with incorrect E1/T1 jumper settings
Hi, I have installed an TE110P but forgot to change the jumper settings to E1. I don't have easy physical access to ther server at the moment so I wonder if it will be possible to run it without changing the jumper settings with a configuration like below or will it be impossible to use the card at all before I fix the jumper? I can't try it myself yet since the operator isn't ready
2010 Sep 29
4
Use modprobe to find E1/T1 jumper setting on PRI card
Does anyone know if I could use modprobe command to find out rather than set the jumper on a Digium PRI card? I want to find out the jumper settings on the card without opening the box which will cause down time. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:
2011 Apr 05
4
OT Problem seeing slave drives.
This isn't specifically about cent os, but I am running cent os on this machine. I've got a Dell Dimension 2400 desktop pc. I've tried on a number of occasions to put a second hard drive in the machine, but I can't get the machine to recognize the second drive in BIOS. I'm going to try and keep this short and sweet. I've tried all that I know to try. I've set the
2007 Nov 02
7
Force SATA1 on AOC-SAT2-MV8
I have a supermicro AOC-SAT2-MV8 and am having some issues getting drives to work. From what I can tell, my cables are to long to use with SATA2. I got some drives to work by jumpering them down to sata1, but other drives I can''t jumper without opening the case and voiding the drive warranty. Does anyone know if there is a system setting to drop it back to SATA1? I use zfs on a raid2 if
2006 Dec 05
0
Jumpers and DIP switches on Atcom AX-4S and AX-1E
Hello all ! Does anyone have a document describing jumpers, DIP switches, and connectors on Atcom's AX-4S (HFC-4S based 4xBRI) and AX-1E (HFC-1E based 1xPRI) cards ? Got the cards without any documents, there is nothing on a subject on Atcom's site, and so far no one from their support is replying to my emails. Thanks very much. Cheers, Nenad -------------- next part
2010 May 08
1
Conflict between jumper settings and dmesg with OctoBRI
Hello, In my system, dmesg outputs : [ 13.039788] wcb4xxp 0000:01:0a.0: probe called for b4xx... [ 13.039788] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 13.039788] wcb4xxp 0000:01:0a.0: Identified HFC-8S Junghanns.NET octoBRI PCI (controller rev 1) at 0001dfe0, IRQ 21 [ 13.041202] wcb4xxp 0000:01:0a.0: NOTE: hardware echo cancellation has been disabled [
2005 Feb 27
5
Problem selecting E1 on TE405P
I am trying to install a TE405P which is to be connected to E1 trunks. I have set the jumpers to E1 (closed), but modprobe wct4xxp still fails with the message: ZT_CHANCONFIG failed for channel 97 - which obviously means the card is still in T1 mode. I have tried everything I can think of, any ideas? TIA
2003 Oct 16
2
Problems with TE410P and E1 line --> Unable to open D-channel 24 (No such device or address)
Hi everybody I've just installed a new Redhat 8.0 and configured it with Asterisk, zaptel and libpri. Afterwards I installed a TE410P and configured this as well. But when starting Asterisk I get the following error message: ------------------------------------------------------- -- Registered channel 1, PRI Signalling signalling ..... -- Registered channel 15, PRI Signalling
2004 Aug 05
3
QuadBri in NT mode not working.
I am unable to make quadbri board to work in NT mode, in TE mode it works OK. I have set 5 jumpers to NT mode. Dmesg shows everything OK: qozap: Junghanns.NET quadBRI card configured at mem 0xd084e000 IRQ 9 HZ 100 CardID 1 qozap: S/T ports: 4 [ TE TE TE NT ] qozap: 1 multiBRI card(s) in this box, 4 BRI ports total. from Asterisk side seems to be ok. pri show span 4 Primary D-channel: 12 Status:
2003 Sep 25
3
configuring TE410P for four E1 PRI lines
hi, I'm trying to configure my newly acquired TE410P card to work as 4 E1 spans. This is supposed to be a drop-in replacement to the earlier E100P card. However, on loading the zaptel module it gets configured as T1 spans basically doing a 'cat' on /proc/zaptel/1 thru 4, it shows 24 channels per span. After this ztcfg fails saying 'ZT_CHANCONFIG failed for channel 97'.
2008 Jul 01
14
MCP55 SATA data corruption in FreeBSD 7
...SATA-150 speed (they are Samsung 1 TB drives), and trying to force the drives to SATA-150 speed with the "patch" provided by the manufacturer does not seem to work (the drives still negotiate SATA-300 speed). I will try to get my hands on another older SATA-150 drive (or a new that can be jumpered) to verify if the culprit is the MCP55 revision (see below) or the interface speed. NOT working (570 SLI) --------------------- atapci1@pci0:0:5:0: class=0x010185 card=0x72501462 chip=0x037f10de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP55 SATA Controll...
2006 Mar 10
1
Junghanns, Germany ISDN settings
Hi all, I've got a Junghanns QuadBRI card which I'm going to install on a system in Germany Anyone give me some tips on the Jumper settings? I'm guessing it's going to be NT mode with p2p? I haven't used ISDN before. I'm going to also put a Digium TDM400P card in there to plug the analog phones into. I'm just worried about the jumpers and modes. Suggestions
2009 Sep 07
5
TE420P configuration
Hello I am trying to configure TE420P but i am confused what to give chan_dahdi :( Below is configuration i am using for TDM400P Please help what changes to make in it... Please provide a link as well [trunkgroups] [channels] ;default for channels switchtype=national rxwink=300 hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes
2010 Jun 17
4
Asterisk + Dahdi does not work with BRI NT mode
Hi all, As i tested with Asterisk+dahdi+libpri with openvox BRI with NT mode, the ISDN phone does not work. There is the setting and error. ***********************Enviroment********************************** Asterisk-1.6.1.18 dahdi-linux-2.3.0.1 dahdi-tool-2.30. libpri-1.4.11.2 CentOS-5.5 OpenVox B400P ******************************************************************** In my case , I set prot 1
2009 Nov 27
5
Installing CentOS 5.4 64bit on server with LSI SAS 1068E controller.
I'm trying to install CentOS 5.4 on a machine with a LSI SAS 1068E controller. I've googled all over the place and found a few different drivers for RHEL5 for it.. and tried a few of them.. Some will load, some complain that this isn't the correct version.. non of them work when it comes to showing Hard Drivers in the partition manager. The machine is a Supermicro SYS-6015V-M3
2006 Aug 17
3
Can I install Centos on Segate ST3160812AS ( SATA II ) Harddisk
HI Can I install Centos on Segate ST3160812AS ( SATA II ) Harddisk? Asky
2003 Jul 26
1
TE410P startup
Hi, I put a TE410P card in a machine (a Tyan 2665 with 2x2.4GHz Xeons). A red flashing light circles around the 4 RJ48C sockets. I load the wct4xxp driver, and the flashing light stops. Whether I connect an E1 signal or not, no lights are shown, and no alarms are reports in the /proc/zaptel/XXX files. What is supposed to happen? I expected all the ports to show a continuous red LED until I
2006 Mar 01
0
No sound after loading module wcte11xp
Hi I'm trying to get a Digium TE110P card working but as soon as I load the module with modprobe wcte11xp the sound stops working for incoming calls (SIP and IAX). I haven't even started to configure the card. Running ztcfg and restarting asterisk doesn't help. After unloading with rmmod wcte11xp the sound comes back for new calls I'm using asterisk 1.2.4, libpri 1.2.2 and
2006 Apr 21
7
some EICON Diva 4BRI questions
Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (master/slave) be configured independent
2020 May 08
1
Noncapture use of locals disabling TailRecursionElimination
On 2020-05-08 1:34 p.m., Xun Li wrote: > Hi, > > I was looking into the implementation of TailRecursionElimination, and > noticed that we have the constrain that if any call uses a local, even > though it doesn't capture the local, it would still prohibit TCE. This > contain seems unnecessary and overly limiting? I think it's a necessary limitation. The idea is that