search for: jumper

Hi, I have installed an TE110P but forgot to change the jumper settings to E1. I don't have easy physical access to ther server at the moment so I wonder if it will be possible to run it without changing the jumper settings with a configuration like below or will it be impossible to use the card at all before I fix the jumper? I can't try it myself yet...

Does anyone know if I could use modprobe command to find out rather than set the jumper on a Digium PRI card? I want to find out the jumper settings on the card without opening the box which will cause down time. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100929/8841fecb/...

...got a Dell Dimension 2400 desktop pc. I've tried on a number of occasions to put a second hard drive in the machine, but I can't get the machine to recognize the second drive in BIOS. I'm going to try and keep this short and sweet. I've tried all that I know to try. I've set the jumpers on the drives to master and slave, I've tried setting the jumpers to cable select. I've changed the IDE ribbon cable. As far as I know, I've done all the trouble shooting steps that you'd do when having this problem. The only conclusion I can come up with, is that it's the...

I have a supermicro AOC-SAT2-MV8 and am having some issues getting drives to work. From what I can tell, my cables are to long to use with SATA2. I got some drives to work by jumpering them down to sata1, but other drives I can''t jumper without opening the case and voiding the drive warranty. Does anyone know if there is a system setting to drop it back to SATA1? I use zfs on a raid2 if makes a difference. This is on release of OpenSolaris 74. This message posted...

Hello all ! Does anyone have a document describing jumpers, DIP switches, and connectors on Atcom's AX-4S (HFC-4S based 4xBRI) and AX-1E (HFC-1E based 1xPRI) cards ? Got the cards without any documents, there is nothing on a subject on Atcom's site, and so far no one from their support is replying to my emails. Thanks very much. Cheers,...

...lid sync priority (8), removing from sync source list [ 13.666827] dahdi_echocan_oslec: Registered echo canceler 'OSLEC' [ 13.671632] dahdi: Registered tone zone 2 (France) [ 13.730925] wcb4xxp 0000:01:0a.0: new card sync source: port 1 The strange thing is I'm quite certain the jumper for port 2 is set to TE mode (I checked twice). Could this come for a bug in wcb4xxp ? The card is an old Junghanns OctoBRI. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100508/11dc16a7/attach...

I am trying to install a TE405P which is to be connected to E1 trunks. I have set the jumpers to E1 (closed), but modprobe wct4xxp still fails with the message: ZT_CHANCONFIG failed for channel 97 - which obviously means the card is still in T1 mode. I have tried everything I can think of, any ideas? TIA

Hi everybody I've just installed a new Redhat 8.0 and configured it with Asterisk, zaptel and libpri. Afterwards I installed a TE410P and configured this as well. But when starting Asterisk I get the following error message: ------------------------------------------------------- -- Registered channel 1, PRI Signalling signalling ..... -- Registered channel 15, PRI Signalling

I am unable to make quadbri board to work in NT mode, in TE mode it works OK. I have set 5 jumpers to NT mode. Dmesg shows everything OK: qozap: Junghanns.NET quadBRI card configured at mem 0xd084e000 IRQ 9 HZ 100 CardID 1 qozap: S/T ports: 4 [ TE TE TE NT ] qozap: 1 multiBRI card(s) in this box, 4 BRI ports total. from Asterisk side seems to be ok. pri show span 4 Primary D-channel: 12 Stat...

hi, I'm trying to configure my newly acquired TE410P card to work as 4 E1 spans. This is supposed to be a drop-in replacement to the earlier E100P card. However, on loading the zaptel module it gets configured as T1 spans basically doing a 'cat' on /proc/zaptel/1 thru 4, it shows 24 channels per span. After this ztcfg fails saying 'ZT_CHANCONFIG failed for channel 97'.

...the MCP55 controller and it is giving me silent data corruption (easily detectable by running ZFS scrub, every time I run it new checksum errors show up). I know the drives are good because when they are hooked up to another controller they work just fine. Unfortunately the drives does not have a jumper for setting SATA-150 speed (they are Samsung 1 TB drives), and trying to force the drives to SATA-150 speed with the "patch" provided by the manufacturer does not seem to work (the drives still negotiate SATA-300 speed). I will try to get my hands on another older SATA-150 drive (or a new...

Hi all, I've got a Junghanns QuadBRI card which I'm going to install on a system in Germany Anyone give me some tips on the Jumper settings? I'm guessing it's going to be NT mode with p2p? I haven't used ISDN before. I'm going to also put a Digium TDM400P card in there to plug the analog phones into. I'm just worried about the jumpers and modes. Suggestions appreciated, -- Chris Earle System Solution...

Hello I am trying to configure TE420P but i am confused what to give chan_dahdi :( Below is configuration i am using for TDM400P Please help what changes to make in it... Please provide a link as well [trunkgroups] [channels] ;default for channels switchtype=national rxwink=300 hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes

Hi all, As i tested with Asterisk+dahdi+libpri with openvox BRI with NT mode, the ISDN phone does not work. There is the setting and error. ***********************Enviroment********************************** Asterisk-1.6.1.18 dahdi-linux-2.3.0.1 dahdi-tool-2.30. libpri-1.4.11.2 CentOS-5.5 OpenVox B400P ******************************************************************** In my case , I set prot 1

I'm trying to install CentOS 5.4 on a machine with a LSI SAS 1068E controller. I've googled all over the place and found a few different drivers for RHEL5 for it.. and tried a few of them.. Some will load, some complain that this isn't the correct version.. non of them work when it comes to showing Hard Drivers in the partition manager. The machine is a Supermicro SYS-6015V-M3

HI Can I install Centos on Segate ST3160812AS ( SATA II ) Harddisk? Asky

Hi, I put a TE410P card in a machine (a Tyan 2665 with 2x2.4GHz Xeons). A red flashing light circles around the 4 RJ48C sockets. I load the wct4xxp driver, and the flashing light stops. Whether I connect an E1 signal or not, no lights are shown, and no alarms are reports in the /proc/zaptel/XXX files. What is supposed to happen? I expected all the ports to show a continuous red LED until I

...;t help. After unloading with rmmod wcte11xp the sound comes back for new calls I'm using asterisk 1.2.4, libpri 1.2.2 and zaptel 1.2.3 from gentoo which uses the source distribution. My configuration is very basic. I have hardly changed anything and the configuration has worked well but the jumper on the card is T1 instead of E1 which would be correct. Loading the module with modprobe wcte11xp t1e1override=15 (see earlier post "run with incorrect E1/T1 jumper settings") makes it possible to configure the card for 31 channels instead of 24 but the sound is still gone. I haven'...

Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (master/slave) be configured independent

...t something marked 'tail' could be emitted as a jump instruction instead of a call instruction. In order to do that, the jumpee has to 'ret' to the same place our function would have returned to. Since the return value is the current top-of-the-stack value when returning[1], the jumper must remove any local variables -- in LLVM, allocas -- from the stack before jumping. This implies that the jumpee may not access our locals at all, it is not sufficient for the callee to merely not capture them. Further to that point, we have an optimization in BasicAA where we conclude that...