asterisk users - Aug 2005 - Ascend Pipeline POTS to TDM400P FXO Question..

I have a TDM400P with some FXO ports, and I wanted to connect the two POTS
lines from my Pipeline-75 ISDN router into the FXO interfaces on my Asterisk
server.

Hooked it up, seemed fine, called in and it answered.   The problem is when
the call is hung up on, the FXO port never drops.  So of course then the P75
just holds the line off hook and you get a busy.   So it's good for the
first
call, and then it's done.

Does anyone know of any adjustments that will make this work?  Figured maybe
someone here has run into such an issue before.  Hooking it to a normal POTS
line works great, but out of the P75 seems to be a no-go outside of the first
call.



---
Howard Leadmon
http://www.leadmon.net

OK, I nailed it, it's working now.   If any are curious, seems in the P75
there is an option called "Forward Disconnect" and by default it's
set to NO,
and needed to be set to YES so it sends the disconnect to the TDM card.


---
Howard Leadmon
http://www.leadmon.net

> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-
> bounces@lists.digium.com] On Behalf Of Howard Leadmon
> Sent: Friday, August 19, 2005 4:06 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: [Asterisk-Users] Ascend Pipeline POTS to TDM400P FXO Question..
> 
> 
> I have a TDM400P with some FXO ports, and I wanted to connect the two POTS
> lines from my Pipeline-75 ISDN router into the FXO interfaces on my
Asterisk
> server.
> 
> Hooked it up, seemed fine, called in and it answered.   The problem is when
> the call is hung up on, the FXO port never drops.  So of course then the
P75
> just holds the line off hook and you get a busy.   So it's good for the
> first
> call, and then it's done.
> 
> Does anyone know of any adjustments that will make this work?  Figured
maybe
> someone here has run into such an issue before.  Hooking it to a normal
POTS
> line works great, but out of the P75 seems to be a no-go outside of the
> first
> call.
> 
> 
> 
> ---
> Howard Leadmon
> http://www.leadmon.net
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

Do you need a "hangup" in your dialplan? 

-Jonathan

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Howard
Leadmon
Sent: Friday, August 19, 2005 4:06 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Ascend Pipeline POTS to TDM400P FXO Question..


I have a TDM400P with some FXO ports, and I wanted to connect the two
POTS
lines from my Pipeline-75 ISDN router into the FXO interfaces on my
Asterisk
server.

Hooked it up, seemed fine, called in and it answered.   The problem is
when
the call is hung up on, the FXO port never drops.  So of course then the
P75
just holds the line off hook and you get a busy.   So it's good for the
first
call, and then it's done.

Does anyone know of any adjustments that will make this work?  Figured
maybe
someone here has run into such an issue before.  Hooking it to a normal
POTS
line works great, but out of the P75 seems to be a no-go outside of the
first
call.



---
Howard Leadmon
http://www.leadmon.net



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users