thr3ads.net - asterisk users - [Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem [Jul 2005]

If this information is useful, please help other people find it:
Share via:

Lull, Rick

2005-Jul-26 06:51 UTC

[Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem

I believe you need the OS79xx.txt file to be the P003 file and the
SIPDefault.cnf file to have the POS3 file name inside.

 

There are some docs on the wiki about it; upgrading the Cisco phones can be
tough.

 

Rick

 

  _____  

From: Walid Azab [mailto:wazab@star-communications.net] 
Sent: Tuesday, July 26, 2005 10:29 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem

 

Hi,

 

I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go
up to 7.5

 

However in my first attempt to go from V.5.1 to 6.0 this is hat happens:

 

- The phone reboots

- The phone then reads the file OS79XX.TXT from the TFP server. In the file
I added the version "P0S3-06-0-00"

- It starts upgrading firmware

- Then I get the following message: (Upgrade Failed - Unauthorized)

 

Any ideas? Please find below my conf files.

 

SIP.CONF

[300]
username=300
type=friend
secret=cisco
record_out=On-Demand
record_in=On-Demand
qualify=no
port=5060
nat=never
mailbox=300@default <mailto:mailbox=300@default> 
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid="" <300>

 

SIP000CCE351C07.cnf
# SIP Configuration Generic File (start)

 

# Line 1 Settings
line1_name: "300"                     ; Line 1 Extension\User ID
line1_displayname: "300"           ; Line 1 Display Name
line1_authname: "300"         ; Line 1 Registration Authentication
line1_password: "cisco"         ; Line 1 Registration Password

 

# Line 2 Settings
line2_name: ""                    ; Line 2 Extension\User ID
line2_displayname: ""                ; Line 2 Display Name
line2_authname: "UNPROVISIONED"         ; Line 2 Registration
Authentication
line2_password: "UNPROVISIONED"         ; Line 2 Registration Password

 

# Line 3 Settings
line3_name: ""                          ; Line 3 Extension\User ID
line3_displayname: ""                   ; Line 3 Display Name
line3_authname: "UNPROVISIONED"         ; Line 3 Registration
Authentication
line3_password: "UNPROVISIONED"         ; Line 3 Registration Password

 

# Line 4 Settings
line4_name: ""                          ; Line 4 Extension\User ID
line4_displayname: ""                   ; Line 4 Display Name
line4_authname: "UNPROVISIONED"         ; Line 4 Registration
Authentication
line4_password: "UNPROVISIONED"         ; Line 4 Registration Password

 

# Line 5 Settings
line5_name: ""                          ; Line 5 Extension\User ID
line5_displayname: ""                   ; Line 5 Display Name
line5_authname: "UNPROVISIONED"         ; Line 5 Registration
Authentication
line5_password: "UNPROVISIONED"         ; Line 5 Registration Password

 

# Line 6 Settings
line6_name: ""                          ; Line 6 Extension\User ID
line6_displayname: ""                   ; Line 6 Display Name
line6_authname: "UNPROVISIONED"         ; Line 6 Registration
Authentication
line6_password: "UNPROVISIONED"         ; Line 6 Registration Password

 

# NAT/Firewall Traversal
nat_address: ""
voip_control_port: "5060"
start_media_port: "16384"
end_media_port:  "32766"

 


# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "WaZaB-SIP"            ; Has no effect on SIP messaging

 

# Time Zone phone will reside in
time_zone: EST

 

# Phone prompt/password for telnet/console session
phone_prompt: "Cisco7960"                              ;
Telnet/Console
Prompt
phone_password: "abc"                          ; Telnet/Console
Password

 

# SIP Configuration Generic File (stop)

SIPDefault.cnf

# Image Version
image_version: "P0S3-06-0-00"

 

# Proxy Server
proxy1_address: "10.150.200.165"
 
# Proxy Server Port (default - 5060)
proxy1_port:"5060"

 

# Emergency Proxy info
proxy_emergency: "10.150.200.165"
proxy_emergency_port: "5060"

 

# Backup Proxy info
proxy_backup: "10.150.200.165"
proxy_backup_port: "5060"
 
# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: "5060"
 
# NAT/Firewall Traversal
nat_enable: "0"
nat_address: ""
voip_control_port: "5061"
start_media_port: "16384"
end_media_port:  "32766"
nat_received_processing: "0"

 

# Proxy Registration (0-disable (default), 1-enable)
proxy_register: "1"
 
# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: "3600"
 
# Codec for media stream (g711ulaw (default), g711alaw, g729)
preferred_codec: "none"
 
# TOS bits in media stream [0-5] (Default - 5)
tos_media: "5"

 

# Enable VAD (0-disable (default), 1-enable)
enable_vad: "0"
 
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable: "1"     ; 0-Disabled, 1-Enabled (default)
 
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: "0"   ; 0-Disabled, 1-Enabled (default)
 
# Telnet Level (enable or disable the ability to telnet into this phone 
telnet_level: "2"      ; 0-Disabled (default), 1-Enabled, 2-Privileged

 

# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: "1"
 
# Out of band DTMF Settings (none-disable, avt-avt enable (default),
avt_always - always avt )
dtmf_outofband: "avt"
 
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db
up, 5-6dB up)
dtmf_db_level: "3"
 
# SIP Timers
timer_t1: "500"                   ; Default 500 msec
timer_t2: "4000"                  ; Default 4 sec
sip_retx: "10"                     ; Default 11
sip_invite_retx: "6"               ; Default 7
timer_invite_expires: "180"        ; Default 180 sec
 
# Setting for Message speeddial to UOne box
messages_uri: "*97"

 

# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./"
 
# Time Server
sntp_mode: "unicast"
sntp_server: "10.150.200.165"
time_zone: "EST"
dst_offset: "1"
dst_start_month: "April"
dst_start_day: ""
dst_start_day_of_week: "Sun"
dst_start_week_of_month: "1"
dst_start_time: "02"
dst_stop_month: "Oct"
dst_stop_day: ""
dst_stop_day_of_week: "Sunday"
dst_stop_week_of_month: "8"
dst_stop_time: "2"
dst_auto_adjust: "1"
 
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with
no user control)
dnd_control: "0"                  ; Default 0 (Do Not Disturb feature
is
off)
 
# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control,
3-enabled no user control)
callerid_blocking: "0"            ; Default 0 (Disable sending all
calls as
anonymous)
 
# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user
control, 3-enabled no user control)
anonymous_call_block: "0"         ; Default 0 (Disable blocking of
anonymous
calls)
 
# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control,
3-enabled with no user control)
call_waiting: "1"                 ; Default 1 (Call Waiting enabled)

 

# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101"           ; Default 100
 
# XML file that specifies the dialplan desired
dial_template: "dialplan"

 

# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"

 

#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "1"

 

#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "0"

 

# URL for external Phone Services
services_url: "http://10.150.200.165/cisco/directory/services.php
<http://10.150.200.165/cisco/directory/services.php> "

 

# URL for external Directory location
directory_url: "http://10.150.200.165/cisco/directory/directory.php
<http://10.150.200.165/cisco/directory/directory.php> "

 

# URL for branding logo
logo_url: "http://10.150.200.165/cisco/aah.bmp
<http://10.150.200.165/cisco/aah.bmp> "

 

# Remote Party ID
remote_party_id: 1              ; 0-Disabled (default), 1-Enabled

 

 



________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________

The information in this communication is intended to be confidential to the
Individual(s) and/or Entity to whom it is addressed.
It may contain information of a Privileged and/or Confidential nature, which is
subject to Federal and/or State privacy regulations.
In the event that you are not the intended recipient or the agent of the
intended recipient, do not copy or use the information
contained within this communication, or allow it to be read, copied or utilized
in any manner, by any other person(s).  Should
this communication be received in error, please notify the sender immediately
either by response e-mail or by phone,
and permanently delete the original e-mail, attachment(s), and any copies. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050726/16465a17/attachment.htm

Watkins, Bradley

2005-Jul-26 07:12 UTC

head link

[Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem

I believe you have to upgrade to 5.3 in order to go from unsigned to signed
executables.  Once you're at 5.3, you can go directly to 7.5.  I did this
recently with a couple of 7960s I had in the lab and it worked perfectly.
 
Regards,
- Brad

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Walid Azab
Sent: Tuesday, July 26, 2005 10:29 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem


Hi,
 
I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go
up to 7.5
 
However in my first attempt to go from V.5.1 to 6.0 this is hat happens:
 
- The phone reboots
- The phone then reads the file OS79XX.TXT from the TFP server. In the file
I added the version "P0S3-06-0-00"
- It starts upgrading firmware
- Then I get the following message: (Upgrade Failed - Unauthorized)
 
Any ideas? Please find below my conf files.
 
SIP.CONF
[300]
username=300
type=friend
secret=cisco
record_out=On-Demand
record_in=On-Demand
qualify=no
port=5060
nat=never
mailbox=300@default <mailto:mailbox=300@default> 
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid="" <300>
 

SIP000CCE351C07.cnf
# SIP Configuration Generic File (start)
 
# Line 1 Settings
line1_name: "300"                     ; Line 1 Extension\User ID
line1_displayname: "300"           ; Line 1 Display Name
line1_authname: "300"         ; Line 1 Registration Authentication
line1_password: "cisco"         ; Line 1 Registration Password
 
# Line 2 Settings
line2_name: ""                    ; Line 2 Extension\User ID
line2_displayname: ""                ; Line 2 Display Name
line2_authname: "UNPROVISIONED"         ; Line 2 Registration
Authentication
line2_password: "UNPROVISIONED"         ; Line 2 Registration Password
 
# Line 3 Settings
line3_name: ""                          ; Line 3 Extension\User ID
line3_displayname: ""                   ; Line 3 Display Name
line3_authname: "UNPROVISIONED"         ; Line 3 Registration
Authentication
line3_password: "UNPROVISIONED"         ; Line 3 Registration Password
 
# Line 4 Settings
line4_name: ""                          ; Line 4 Extension\User ID
line4_displayname: ""                   ; Line 4 Display Name
line4_authname: "UNPROVISIONED"         ; Line 4 Registration
Authentication
line4_password: "UNPROVISIONED"         ; Line 4 Registration Password
 
# Line 5 Settings
line5_name: ""                          ; Line 5 Extension\User ID
line5_displayname: ""                   ; Line 5 Display Name
line5_authname: "UNPROVISIONED"         ; Line 5 Registration
Authentication
line5_password: "UNPROVISIONED"         ; Line 5 Registration Password
 
# Line 6 Settings
line6_name: ""                          ; Line 6 Extension\User ID
line6_displayname: ""                   ; Line 6 Display Name
line6_authname: "UNPROVISIONED"         ; Line 6 Registration
Authentication
line6_password: "UNPROVISIONED"         ; Line 6 Registration Password
 
# NAT/Firewall Traversal
nat_address: ""
voip_control_port: "5060"
start_media_port: "16384"
end_media_port:  "32766"
 

# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "WaZaB-SIP"            ; Has no effect on SIP messaging
 
# Time Zone phone will reside in
time_zone: EST
 
# Phone prompt/password for telnet/console session
phone_prompt: "Cisco7960"                              ;
Telnet/Console
Prompt
phone_password: "abc"                          ; Telnet/Console
Password
 
# SIP Configuration Generic File (stop)

SIPDefault.cnf
# Image Version
image_version: "P0S3-06-0-00"
 
# Proxy Server
proxy1_address: "10.150.200.165"
 
# Proxy Server Port (default - 5060)
proxy1_port:"5060"
 
# Emergency Proxy info
proxy_emergency: "10.150.200.165"
proxy_emergency_port: "5060"
 
# Backup Proxy info
proxy_backup: "10.150.200.165"
proxy_backup_port: "5060"
 
# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: "5060"
 
# NAT/Firewall Traversal
nat_enable: "0"
nat_address: ""
voip_control_port: "5061"
start_media_port: "16384"
end_media_port:  "32766"
nat_received_processing: "0"
 
# Proxy Registration (0-disable (default), 1-enable)
proxy_register: "1"
 
# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: "3600"
 
# Codec for media stream (g711ulaw (default), g711alaw, g729)
preferred_codec: "none"
 
# TOS bits in media stream [0-5] (Default - 5)
tos_media: "5"
 
# Enable VAD (0-disable (default), 1-enable)
enable_vad: "0"
 
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable: "1"     ; 0-Disabled, 1-Enabled (default)
 
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: "0"   ; 0-Disabled, 1-Enabled (default)
 
# Telnet Level (enable or disable the ability to telnet into this phone 
telnet_level: "2"      ; 0-Disabled (default), 1-Enabled, 2-Privileged
 
# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: "1"
 
# Out of band DTMF Settings (none-disable, avt-avt enable (default),
avt_always - always avt )
dtmf_outofband: "avt"
 
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db
up, 5-6dB up)
dtmf_db_level: "3"
 
# SIP Timers
timer_t1: "500"                   ; Default 500 msec
timer_t2: "4000"                  ; Default 4 sec
sip_retx: "10"                     ; Default 11
sip_invite_retx: "6"               ; Default 7
timer_invite_expires: "180"        ; Default 180 sec
 
# Setting for Message speeddial to UOne box
messages_uri: "*97"
 
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./"
 
# Time Server
sntp_mode: "unicast"
sntp_server: "10.150.200.165"
time_zone: "EST"
dst_offset: "1"
dst_start_month: "April"
dst_start_day: ""
dst_start_day_of_week: "Sun"
dst_start_week_of_month: "1"
dst_start_time: "02"
dst_stop_month: "Oct"
dst_stop_day: ""
dst_stop_day_of_week: "Sunday"
dst_stop_week_of_month: "8"
dst_stop_time: "2"
dst_auto_adjust: "1"
 
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with
no user control)
dnd_control: "0"                  ; Default 0 (Do Not Disturb feature
is
off)
 
# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control,
3-enabled no user control)
callerid_blocking: "0"            ; Default 0 (Disable sending all
calls as
anonymous)
 
# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user
control, 3-enabled no user control)
anonymous_call_block: "0"         ; Default 0 (Disable blocking of
anonymous
calls)
 
# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control,
3-enabled with no user control)
call_waiting: "1"                 ; Default 1 (Call Waiting enabled)
 
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101"           ; Default 100
 
# XML file that specifies the dialplan desired
dial_template: "dialplan"
 
# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
 
#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "1"
 
#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "0"
 
# URL for external Phone Services
services_url: "http://10.150.200.165/cisco/directory/services.php
<http://10.150.200.165/cisco/directory/services.php> "
 
# URL for external Directory location
directory_url: "http://10.150.200.165/cisco/directory/directory.php
<http://10.150.200.165/cisco/directory/directory.php> "
 
# URL for branding logo
logo_url: "http://10.150.200.165/cisco/aah.bmp
<http://10.150.200.165/cisco/aah.bmp> "
 
# Remote Party ID
remote_party_id: 1              ; 0-Disabled (default), 1-Enabled
 
 




The contents of this e-mail are intended for the named addressee only. It
contains information that may be confidential. Unless you are the named
addressee or an authorized designee, you may not copy or use it, or disclose
it to anyone else. If you received it in error please notify us immediately
and then destroy it. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050726/55e5e86e/attachment.htm

Walid Azab

2005-Jul-26 07:28 UTC

head link

[Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem

Hi,
 
I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go
up to 7.5
 
However in my first attempt to go from V.5.1 to 6.0 this is hat happens:
 
- The phone reboots
- The phone then reads the file OS79XX.TXT from the TFP server. In the file
I added the version "P0S3-06-0-00"
- It starts upgrading firmware
- Then I get the following message: (Upgrade Failed - Unauthorized)
 
Any ideas? Please find below my conf files.
 
SIP.CONF
[300]
username=300
type=friend
secret=cisco
record_out=On-Demand
record_in=On-Demand
qualify=no
port=5060
nat=never
mailbox=300@default
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid="" <300>
 
SIP000CCE351C07.cnf
# SIP Configuration Generic File (start)
 
# Line 1 Settings
line1_name: "300"                     ; Line 1 Extension\User ID
line1_displayname: "300"           ; Line 1 Display Name
line1_authname: "300"         ; Line 1 Registration Authentication
line1_password: "cisco"         ; Line 1 Registration Password
 
# Line 2 Settings
line2_name: ""                    ; Line 2 Extension\User ID
line2_displayname: ""                ; Line 2 Display Name
line2_authname: "UNPROVISIONED"         ; Line 2 Registration
Authentication
line2_password: "UNPROVISIONED"         ; Line 2 Registration Password
 
# Line 3 Settings
line3_name: ""                          ; Line 3 Extension\User ID
line3_displayname: ""                   ; Line 3 Display Name
line3_authname: "UNPROVISIONED"         ; Line 3 Registration
Authentication
line3_password: "UNPROVISIONED"         ; Line 3 Registration Password
 
# Line 4 Settings
line4_name: ""                          ; Line 4 Extension\User ID
line4_displayname: ""                   ; Line 4 Display Name
line4_authname: "UNPROVISIONED"         ; Line 4 Registration
Authentication
line4_password: "UNPROVISIONED"         ; Line 4 Registration Password
 
# Line 5 Settings
line5_name: ""                          ; Line 5 Extension\User ID
line5_displayname: ""                   ; Line 5 Display Name
line5_authname: "UNPROVISIONED"         ; Line 5 Registration
Authentication
line5_password: "UNPROVISIONED"         ; Line 5 Registration Password
 
# Line 6 Settings
line6_name: ""                          ; Line 6 Extension\User ID
line6_displayname: ""                   ; Line 6 Display Name
line6_authname: "UNPROVISIONED"         ; Line 6 Registration
Authentication
line6_password: "UNPROVISIONED"         ; Line 6 Registration Password
 
# NAT/Firewall Traversal
nat_address: ""
voip_control_port: "5060"
start_media_port: "16384"
end_media_port:  "32766"
 

# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "WaZaB-SIP"            ; Has no effect on SIP messaging
 
# Time Zone phone will reside in
time_zone: EST
 
# Phone prompt/password for telnet/console session
phone_prompt: "Cisco7960"                              ;
Telnet/Console
Prompt
phone_password: "abc"                          ; Telnet/Console
Password
 
# SIP Configuration Generic File (stop)

SIPDefault.cnf
# Image Version
image_version: "P0S3-06-0-00"
 
# Proxy Server
proxy1_address: "10.150.200.165"
 
# Proxy Server Port (default - 5060)
proxy1_port:"5060"
 
# Emergency Proxy info
proxy_emergency: "10.150.200.165"
proxy_emergency_port: "5060"
 
# Backup Proxy info
proxy_backup: "10.150.200.165"
proxy_backup_port: "5060"
 
# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: "5060"
 
# NAT/Firewall Traversal
nat_enable: "0"
nat_address: ""
voip_control_port: "5061"
start_media_port: "16384"
end_media_port:  "32766"
nat_received_processing: "0"
 
# Proxy Registration (0-disable (default), 1-enable)
proxy_register: "1"
 
# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: "3600"
 
# Codec for media stream (g711ulaw (default), g711alaw, g729)
preferred_codec: "none"
 
# TOS bits in media stream [0-5] (Default - 5)
tos_media: "5"
 
# Enable VAD (0-disable (default), 1-enable)
enable_vad: "0"
 
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable: "1"     ; 0-Disabled, 1-Enabled (default)
 
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: "0"   ; 0-Disabled, 1-Enabled (default)
 
# Telnet Level (enable or disable the ability to telnet into this phone 
telnet_level: "2"      ; 0-Disabled (default), 1-Enabled, 2-Privileged
 
# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: "1"
 
# Out of band DTMF Settings (none-disable, avt-avt enable (default),
avt_always - always avt )
dtmf_outofband: "avt"
 
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db
up, 5-6dB up)
dtmf_db_level: "3"
 
# SIP Timers
timer_t1: "500"                   ; Default 500 msec
timer_t2: "4000"                  ; Default 4 sec
sip_retx: "10"                     ; Default 11
sip_invite_retx: "6"               ; Default 7
timer_invite_expires: "180"        ; Default 180 sec
 
# Setting for Message speeddial to UOne box
messages_uri: "*97"
 
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./"
 
# Time Server
sntp_mode: "unicast"
sntp_server: "10.150.200.165"
time_zone: "EST"
dst_offset: "1"
dst_start_month: "April"
dst_start_day: ""
dst_start_day_of_week: "Sun"
dst_start_week_of_month: "1"
dst_start_time: "02"
dst_stop_month: "Oct"
dst_stop_day: ""
dst_stop_day_of_week: "Sunday"
dst_stop_week_of_month: "8"
dst_stop_time: "2"
dst_auto_adjust: "1"
 
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with
no user control)
dnd_control: "0"                  ; Default 0 (Do Not Disturb feature
is
off)
 
# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control,
3-enabled no user control)
callerid_blocking: "0"            ; Default 0 (Disable sending all
calls as
anonymous)
 
# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user
control, 3-enabled no user control)
anonymous_call_block: "0"         ; Default 0 (Disable blocking of
anonymous
calls)
 
# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control,
3-enabled with no user control)
call_waiting: "1"                 ; Default 1 (Call Waiting enabled)
 
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101"           ; Default 100
 
# XML file that specifies the dialplan desired
dial_template: "dialplan"
 
# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
 
#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "1"
 
#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "0"
 
# URL for external Phone Services
services_url: "http://10.150.200.165/cisco/directory/services.php"
 
# URL for external Directory location
directory_url: "http://10.150.200.165/cisco/directory/directory.php"
 
# URL for branding logo
logo_url: "http://10.150.200.165/cisco/aah.bmp"
 
# Remote Party ID
remote_party_id: 1              ; 0-Disabled (default), 1-Enabled
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050726/e42af7fc/attachment.htm

Reasonably Related Threads

Search for more maybe matching threads

asterisk users - Jul 2005 - 7960 SIP Firmware Upgrade Strange Problem

[Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem

[Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem

[Asterisk-Users] 7960 SIP Firmware Upgrade Strange Problem

Reasonably Related Threads