similar to: 7960 SIP Firmware Upgrade Strange Problem

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

Hi all, So I have been reading through the docs available online and the different threads on this list, but I cannot seem to get this phone to work. I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see attached), when I configure the phone to point to my tftp server and reboot it I get this message: Connection received from 10.6.0.224 on port 50608 [09/02 12:16:11.750] Read request

Hi All Total noob on the list so all help appreciated.... I've successfully installed Asterisk on an IBM A30P Thinkpad using fedora Core 2 (I'm looking at having a mobile PBX for conferences and shows). I've plugged in two Cisco 7960 phones.... The phones register with the Asterisk correctly and I can run the demo's and even the AIX demo through to digium works correctly.......

I have Asterisk version 1.0-RC1 running on Debian Woody. I have 1 analog phone working, 2 inbound lines working, X-Lite is working. The problem that I am having is with Cisco 7960 with SIP version 7.2 software. I can make outbound calls and they work fine, I even get a notice that I have voice mail on the phone and it seems to register properly but I can seem to dial to the phone.

Thanks But how about the config files (SIP...) that needs to be inside the tftp server, where can I get a sample of that? That's where the images for the firmwares of the ip phones come from, on boot right? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alen Salamun Sent: Wednesday, January 26, 2005 5:47

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have

I have an *ipphone 7965G* which has to be connected to Asterisk. It has been flashed with SIP firmware but the config file doesn't seem to work maybe I am missing something in it. I appreciate it if you can share your working sample config file with me. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

ala cisco 7960 -----Original Message----- From: Matt Schulte Sent: Thursday, December 16, 2004 10:34 AM To: 'Paul A Brown' Subject: RE: [Asterisk-Users] Cisco 7960 (SIP) hold problems Sure thing, the biggest problem I had was getting the SIP filenames working correctly for updating the firmware (blah, I love Cisco but these phones are a joke for support). This works for me! Good luck.

Dear All, I'm trying to configure my new phone Cisco 7960 to work with asterisk. I followed http://www.asteriskguru.com/tutorials/cisco_7960_ip_phone_configuration.html and I got into the point where I can see on the the display line indication showing "55 <phone icon with x>" so it looks like the phone is not registered. The phone and the asterisk are in the same local

Hi, I'm experimenting with the dev kit lite and now past the USB unpleasantness it's working great with standard phones and lines. The priority right now is getting soft phones (under Windows XP) working well. So far, I've only been able to get the XTEN Lite phone working and I really don't understand how I set it up. I used "xten" for every option everywhere (display

I cannot get incoming calls to sip phones behind a PIX to work, outgoing is fine. Asterisk (Public IP) --> Internet --> PIX (NAT) --> Sip Phones I have tried no fixup protocol sip, I have punched a hole in the Pix allowing anything from the Asterisk box into the network, still no incoming. I have done all the Wiki suggests in regarding to NAT. Is their a trick getting the

Running those versions of code, my 7960 will not register with Asterisk. The same 7960 is authenticating against another * server on line 2 just fine though - with the same settings in sip.conf. On the failing * server I am just getting 401 unauthorized errors on the console. From the phone's shell I get that t is registering, but not authenticated .1. from show reg. Any ideas would be

Hi all, i have a problem with some cisco 7960. Yesterday i did a firmware-upgrade from 3.1 (1.2) with P0S30203.bin as described in the most documents. Now i get the message Phone unprovisioned and in TFTP-Log i find the following line: 07.03.2005 19:58 :Timeout error sending P0S3-07-3-00.bin to 192.168.0.83, 0 bytes So i think it now wants to load the file P0S3-07-3-00.bin. But i have not

I am trying to convert my 7905G to be SIP based and seem to be running into a few hassles. Below are all the config files and logs from the server. I have tried to follow the pdf's from cisco and some posts from other mailing lists that google turnedup, but it seems that nothing is working. Am I somehow missing a fundamental step in trying to upgrade from Call Manager to SIP? Any help is

Gents, I've built an Asterisk system to replace our PBX at work and have Cisco 7960 phones (SIP 7.4) running with Asterisk 1.0.7. How to I get Asterisk to recognise the '#' being pressed during a call? In sip.conf I have entries likle this: [2001] type=friend context=local-phone auth=md5 username=2001 secret=xyzzy callerid=Jack Tubby <2001>

Hi Everyone, I am having some issues getting my 7961 working with Trixbox. I have loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes into an unprovisioned state. A status message shows up and says ?Error Verifying Config Info?. I have read quite a bit on this topic (getting 7961?s to work with Asterisk and TB) and only came across a few postings where other people

I've been pulling out my hair all day on this one. If anyone can help, I'd really appreciate it. :-( I've got an Aastra 9133i (with the latest firmware version) and a Cisco 7960 sitting behind a NAT device on my LAN. The Asterisk server is hosted offsite and has a public IP address. I've set up port-forwarding on the firewall for both phones to tunnel the SIP messages initiated

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031207/e5e9b8eb/attachment.htm -------------- next part -------------- Hello all, I am newbie to Telephony world (IP and PSTN). Please excuse me if you find my questions very dumb. I am trying to configure my IP 7940 with the Asterisk, when phone boots up it only shows the message "Phone

Hi Jean-Marc, thank you for that suggestion! It seems that the file "fixed_c6x.h" is not part of the Opus sources, so the compiler cannot find it after enabling the TI_C6X_ASM config option. Maybe it was only part of an early version of the Opus sources? I looked for the file in versions V1.1, V1.1.1, V1.2alpha and V1.3 but did not found it. Do you have an idea, where I can get the

Dear Opus family, we have implemented the Opus codec at a Texas Instruments DSP C6418. It is working fine! Does anyone has experience with the configuration of the codec for a speed optimized implementation on that DSP? At the moment, we use the following settings: #define NONTHREADSAFE_PSEUDOSTACK 1 #define FIXED_POINT