Hi, i am running * 1.0.9 with a newer version of the TE405P. Modprobe wct4xxp and ztcfg are OK. zap show channels only shows me the following. my zapata.conf: [pstn] switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown usecallingpres=yes busydetect=no ; not need on pri callprogress=no ; was yes but wiki says experimatley could be produce hangups callwaitingcallerid=yes ; show callerid on callwaitingcalls echotraining=no echocancel=no echocancelwhenbridged=no overlapdial=yes immediate=no callerid=asreceived language=de rxgain=0.0 txgain=0.0 group=1 signalling=pri_cpe context=incoming channel => 1-15,17-31 group=2 signalling=pri_net context=outgoing channel =>32-46,48-62 Why can't i see or use my channels? thanks, Kib
On Wed, Jul 13, 2005 at 05:19:08PM +0200, Kib Eki wrote:> Hi, > > i am running * 1.0.9 with a newer version of the TE405P. > > Modprobe wct4xxp and ztcfg are OK. > > zap show channels only shows me the following. > > my zapata.conf: > [pstn]Shouldn't that be "[channels]" ?> Why can't i see or use my channels?-- Tzafrir Cohen | tzafrir@jbr.cohens.org.il | VIM is http://tzafrir.org.il | | a Mutt's tzafrir@cohens.org.il | | best ICQ# 16849755 | | friend
On Wednesday 13 Jul 2005 16:19, Kib Eki wrote:> Hi, > > i am running * 1.0.9 with a newer version of the TE405P. > > Modprobe wct4xxp and ztcfg are OK. > > zap show channels only shows me the following. > > my zapata.conf:[...]> Why can't i see or use my channels?You're not going to get anywhere unless you show us the error messages and what if anything has changed on your system. B