-----Original Message-----
From: Altus Snyman [mailto:altus@stormcorp.co.za]
Sent: Monday, May 16, 2005 9:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] 2 servers via PRI
Good day all
How do i set a connection between 2 asterisk servers via PRI
In Bri I would set one to NT and TE
How shoud the zapata.conf and zaptel.conf look
And how should the cable be?
All I got on the web was to set one to "pri_net"...this cant be all?
And the cable > pin1 <--> pin4> pin2 <--> pin5> pin3 <--> pin6>
pin4 <--> pin1> pin5
<--> pin2> pin6 <--> pin3> pin5 <--> pin8> pin8
<--> pin7
Please Help and advice
Thanks Altus
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~
I have one asterisk server connected to 2 Norstar mics systems via two
PRI lines. Here is how I did it
My Zaptel.conf
loadzone = us
defaultzone = us
#loadzone = us-old
#loadzone=gr
#loadzone=it
#loadzone=fr
#loadzone=de
#loadzone=uk
#loadzone=fi
#loadzone=jp
#loadzone=sp
#loadzone=no
#
# PRI's
#
span=1,0,0,esf,b8zs
#clear=1-24
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
#clear=25-48
bchan=25-47
dchan=48
my Zapata.conf
[channels]
usecallerid=yes
hidecallerid=no
usecallingpres=yes
callerid=asreceived
echocancel = yes ; You can set this to 16, 32, 64, or 128, or 256
tweak to your needs. Try 64. Yes=128.
echotraining = 400 ; Ast trains to the beginning of the call, num is in
millisec. 0-4000. Try 800.
echocancelwhenbridged = yes
context = internal
switchtype = dms100
signalling = pri_net
group = 1
channel => 1-23
context = internal
switchtype = dms100
signalling = pri_net
group = 2
channel => 25-47
my extensions.conf (partial)
;Allows access to 2000 3000 Nortel extensions
exten => _2XXX,1,Dial(${TELX-MICS2}/${EXTEN:${TELX-MICS2-MSD}})
exten => _2XXX,2,Congestion
exten => _3XXX,1,Dial(${TELX-MICS1}/${EXTEN:${TELX-MICS1-MSD}})
exten => _3XXX,2,Congestion
I hope this help[s