Hello, Being totally fed up with the lack of quality and reliability from both VoicePulse and BroadVoice, We are switching to a direct IP connection to Global Crossing. We've installed a local point-to-point T1 into their CO, and they will give/take SIP g729a directly and act as the gateway for us. In setting up the inbound SIP service, they are asking the question, "In what format do I want my ANI & DNIS presented?" They provided examples, such as "*ANI*DNIS", etc. Does anyone out there know how Asterisk expects to see this information on inbound calls? Thanks, Adam The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any.
I believe *ANI*DNIS That's how Asterisk sends it when I set my t1 line to featd. In /etc/asterisk/zapata.conf signalling=featd not much to go on, but a little! -Matt -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Adam Robins Sent: Thursday, May 12, 2005 9:44 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Inbound ANI & DNIS format Hello, Being totally fed up with the lack of quality and reliability from both VoicePulse and BroadVoice, We are switching to a direct IP connection to Global Crossing. We've installed a local point-to-point T1 into their CO, and they will give/take SIP g729a directly and act as the gateway for us. In setting up the inbound SIP service, they are asking the question, "In what format do I want my ANI & DNIS presented?" They provided examples, such as "*ANI*DNIS", etc. Does anyone out there know how Asterisk expects to see this information on inbound calls? Thanks, Adam The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
huh? That's a TDM/RBS type question. I've not seen most implementations of SIP interconnections doing things like that? On 5/12/05, Adam Robins <arobins@pharmacentra.com> wrote:> Hello, > > Being totally fed up with the lack of quality and reliability from both > VoicePulse and BroadVoice, > We are switching to a direct IP connection to Global Crossing. We've > installed a local point-to-point T1 into their CO, and they will > give/take SIP g729a directly and act as the gateway for us. > > In setting up the inbound SIP service, they are asking the question, "In > what format do I want my ANI & DNIS presented?" They provided examples, > such as "*ANI*DNIS", etc. > > Does anyone out there know how Asterisk expects to see this information > on inbound calls? > > Thanks, > Adam > > The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any. > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >