I'm trying to determine if this is a zaptel issue or a sangoma issue. When I start our server, it gets to the point where it says "starting wanrouter" (thats the sangoma drivers) and it just hangs there. Nothing happens. Can't even use console. I unplugged the 4 PRI lines and rebooted. This time machine comes up. I logged in. While logged in, I plug the 4 spans back in. I try a few commands (like ls, ps) and then suddenly, the machine locks up again. Repeat but don't plug cables back in. Try 'dmesg'. And I see this: zt_rbs: Tried to set RBS hook state 0 on channel WPT1/0/1 while span WPT1/0 lacks rbsbits or hooksig function zt_rbs: Tried to set RBS hook state 0 on channel WPT1/0/2 while span WPT1/0 lacks rbsbits or hooksig function <snip> zt_rbs: Tried to set RBS hook state 0 on channel WPT1/0/23 while span WPT1/0 lacks rbsbits or hooksig function zt_rbs: Tried to set RBS hook state 0 on channel WPT1/0/24 while span WPT1/0 lacks rbsbits or hooksig function Any idea what this is? Never seen it before. We control both ends of the PRIs and nothing has changed on the far end. -Matthew -- ------------------------------------------------------------------------ Matthew Boehm, IT Director Cypress Telecommunications mboehm@cytelcom.com 3838 N. Sam Houston Parkway E #400 T: 832-200-8640 x3044 Houston, TX 77032 My girlfriend was recently diagnosed with multiple personality disorder; When she called yesterday, my CallerID box exploded. ------------------------------------------------------------------------