Hi
I have been searching the wiki and mailing lists and I cant see where my
config is incorrect. I have a Digium tdm11b
(1 fxo + 1 fxs) this is the output of
cat /etc/zaptel.conf
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
fxsks=1
fxoks=2
# channel 3, WCTDM, inactive.
# channel 4, WCTDM, inactive.
# Span 2: ZTDUMMY/1 "ZTDUMMY/1 1"
# Global data
loadzone = us
defaultzone = us
ztcfg -vv
Zaptel Configuration
=====================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
2 channels configured.
I am running *@home and have used all defaluts , I configured the digium
card using
/usr/local/sbin/genzaptelconf
I have then edited /etc/asterisk/zapata-channels.conf
; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
; Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
signalling=fxs_ks
callerid=asrecieved
channel => 1
signalling=fxo_ks
context=incoming
callerid="Home" <4002>
mailbox=4002
channel => 2
; channel 3, WCTDM, inactive.
; channel 4, WCTDM, inactive.
; Span 2: ZTDUMMY/1 "ZTDUMMY/1 1"
Adding "context=incomming and 4002 as the extension & mailbox"
I then created a call goup using AMP and added 4002 to the call group I
am able to call the analog extension by dialing 700
I am however unable to call from the analog phone
when I pick up the handset it gives me a solid dialtone for about 2
seconds and then hangs up
this is all that is seen when connecting to * using asterisk -r
asterisk -r
Asterisk CVS-v1-0-03/19/05-19:13:43, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster@digium.com>
========================================================================Connected
to Asterisk CVS-v1-0-03/19/05-19:13:43 currently running on
asterisk1 (pid = 1639)
Verbosity is at least 3
-- Starting simple switch on 'Zap/2-1'
-- Hungup 'Zap/2-1'
this is the output of lsmod
lsmod
Module Size Used by Not tainted
usbserial 23580 0 (autoclean) (unused)
parport_pc 18756 0 (autoclean) (unused)
lp 8964 0 (autoclean)
parport 36832 0 (autoclean) [parport_pc lp]
autofs4 15928 0 (autoclean) (unused)
audit 89816 3
8139too 17384 1
mii 3956 0 [8139too]
crc32 3712 0 [8139too]
ztdummy 2464 0 (unused)
wcusb 19520 0 (unused)
wcfxs 35232 2
zaptel 178560 8 [ztdummy wcusb wcfxs]
floppy 56656 0 (autoclean)
sg 36204 0 (autoclean) (unused)
scsi_mod 106408 1 (autoclean) [sg]
microcode 5688 0 (autoclean)
keybdev 2944 0 (unused)
mousedev 5524 0 (unused)
hid 22116 0 (unused)
input 5888 0 [keybdev mousedev hid]
usb-uhci 25740 0 [ztdummy]
usbcore 77376 1 [usbserial wcusb hid usb-uhci]
ext3 85736 2
jbd 50604 2 [ext3]
Please could someone point me in the right direction to allowing calls
to be placed from the analog phone.
I am able to dialout using the fxo module and that all seems fine.
Regards
Dean
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.8.3 - Release Date: 2005/03/25
