Displaying 20 results from an estimated 81 matches for "aaln".
2003 Oct 20
1
mgcp transfer takeback with ata186 (logs with comments - long post)
...-- Accepting AUTHENTICATED call from 217.114.97.249, requested format
= 8, actual format = 8
-- Executing Dial("IAX2[virtupbx@virtupbx]/16384", "Local/7001@pbx")
in new stack
-- Called 7001@pbx
-- Executing Dial("Local/7001@pbx-0685,2",
"MGCP/aaln/1@217.114.96.220") in new stack
-- MGCP mgcp_request(aaln/1@217.114.96.220)
-- MGCP cw: 0, dnd: 0, so: 0, sno: 0
-- MGCP mgcp_new(MGCP/aaln/1@217.114.96.220-0) created in state: Down
-- Called aaln/1@217.114.96.220
-- MGCP/aaln/1@217.114.96.220-0 is ringing
-- Loc...
2003 Dec 29
1
transfer with MGCP
.... What is wrong? here is my
mgcp.conf and exept from the console about this call.
mgcp.conf:
[dg104s]
host = 172.50.0.1
threewaycalling = yes
transfer = yes
callwaiting = yes
cancallforward=yes
callreturn=yes
context = test
callgroup = 3
pickupgroup = 3
console:
-- Executing Dial("MGCP/aaln/3@dg104s-1", "MGCP/aaln/4@dg104s||t")
in new stack
-- MGCP mgcp_request(aaln/4@dg104s)
-- MGCP cw: -1, dnd: 0, so: 0, sno: 0
-- MGCP mgcp_new(MGCP/aaln/4@dg104s-1) created in state: Down
-- Called aaln/4@dg104s
-- MGCP/aaln/4@dg104s-1 is ringing
-- Endpoint &...
2004 Jan 22
3
MGCP w/8x8 DTA-310 and as5300 pstn gateway
Hello folks,
I'm trying to get an 8x8 DTA-310 running mgcp to work. I get no
dialtone & can't get it to ring. My mgcp.conf says:
;
; MGCP Configuration for Asterisk
;
[general]
port = 2427
bindaddr = 0.0.0.0
[172.16.2.25]
host = 172.16.2.25
context = default
line => aaln/1
And here's the interesting bits of extensions.conf:
[globals]
...
TRUNK=H323/BYEXTENSION@pstn_gw
...
[default]
exten => 2084728803,1,Dial(MGCP/aaln/1@172.16.2.25)
And, finally, the h323.conf:
; The NuFone Network's
; Open H.323 driver configuration
;
[general]
port = 1720
bindadd...
2003 Sep 29
1
Can't place a call with MGCP Phone
...received an MGCP Phone for test purpose and I can't place a
call from my MGCP Phone.
I can call my MGCP phone from a SIP Phone. Here is my mgcp.conf:
;
; MGCP Configuration for Asterisk
;
[general]
;port = 2427
;bindaddr = 0.0.0.0
;[dlinkgw]
;host = 192.168.0.64
;context = default
;line => aaln/2
;line => aaln/1
[192.168.10.10]
host = 192.168.10.10
context = default
line => aaln/1
I haven't found any mgcp related information
Regards,
Daniel ANDRE
--
Daniel ANDRE (mailto:dandre@iris-tech.fr)
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.co...
2005 May 20
2
MGCP 1.0 / NCS 1.0
...appens - below
*CLI> mgcp reload
Reloading MGCP
== Parsing '/etc/asterisk/mgcp.conf': Found
Use EXIT or QUIT to exit the asterisk console
== MGCP Listening on 10.1.22.39:2427
== Using TOS bits 0
mgcp show endpoints
Gateway '001099008521' at 10.1.22.81 (Static)
-- 'aaln/4@001099008521 in 'default' is idle
-- 'aaln/3@001099008521 in 'default' is idle
-- 'aaln/2@001099008521 in 'default' is idle
-- 'aaln/1@001099008521 in 'default' is idle
*CLI> mgcp
audit debug no reload show
*CLI> mgcp audit
No s...
2004 Oct 15
1
Asterisk crashes on special Transfer with MGCP/ATA 186
...er.agi") in new stack
-- Launched AGI Script /home/kpj/pbx/var/lib/asterisk/agi-bin/nuller.agi
-- Accepting call from '01635571857' to '8551' on channel 0/1, span 3
-- AGI Script nuller.agi completed, returning 0
-- Executing Dial("Zap/7-1", "MGCP/aaln/1@192.168.1.26||") in new stack
-- MGCP mgcp_request(aaln/1@192.168.1.26)
-- MGCP cw: 0, dnd: 0, so: 0, sno: 0
-- MGCP mgcp_new(MGCP/aaln/1@192.168.1.26-1) created in state: Down
-- Called aaln/1@192.168.1.26
-- MGCP/aaln/1@192.168.1.26-1 is ringing
-- Endpoint 'aal...
2004 Jan 22
2
MGCP Problem.
Hi.
I'm new in Asterisk with MGCP. I set up a MGCP user agent and start asterisk
with the next configuration files.
'--------------- extensions.conf
----------------------------------------------------
[general]
static=yes
writeprotect=yes
[globals]
ap1 => mgcp/aaln/ap200@64.76.148.186
[macro-apl1]
exten => s,1,Dial(${ARG1},30,Ttmr)
;exten => s,2,Voicemail(u${MACRO_EXTEN})
;exten => s,3,Hangup
;exten => s,102,Voicemail(b${MACRO_EXTEN})
;exten => s,103,Hangup
[SIP]
include => ent
[ent]
exten => 112,1,VoiceMail(b112)
exten => 111,1,Mac...
2003 May 19
1
MGCP and Cisco ubr924
...k as the call-agent. I have manually registered the endpoint in mgcp.conf. When I pick up the phone, I get no dialtone and debug shows errors. IOS on the ubr924 is 12.2.
Any help is appreciated.
from mgcp.conf:
[ubr924]
host=65.37.86.203
context = from-sip (just as a test context)
line => aaln/0
line => aaln/1
MGCP debug:
--- start debug ---
from 65.37.86.203:2427Verb: '510', Identifier: '14', Endpoint: 'Protocol', Version: 'Error or'
1 headers, 0 lines
MGCP read:
510 15 Protocol Error or Version Unsupported
from 65.37.86.203:2427Verb: '510...
2009 Dec 17
2
Integrate a CPE with Asterisk in MGCP
...sallow=all
allow=g729
allow=alaw
020202020202]
context=mgcp
host=dynamic
canreinvite=no
dtmfmode=rfc2833
nat=yes
threewaycalling=yes
transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to
transfer
callwaiting=yes ; this might be a cause of trouble for ip10s
cancallforward=yes
line=aaln/1
- Place outgoing calls through a SIP PROXY : OK, but the call goes down
after some seconds :
-- Executing Answer("MGCP/aaln/1 at 020202020202-1", "") in new stack
-- MGCP mgcp_answer(MGCP/aaln/1 at 020202020202-1) on aaln/1 at 020202020202-1
-- Executing Dial(&qu...
2003 Sep 24
3
Dlink DG-104S (chan_mgcp) and configuration w/Asterisk
...e: and DNS IP addres the DNS IP of the MGCP box and DNS State
disabled (not sure what to set it to) -- don't have a manual for it...
In my mgcp.conf I have:
;
; MGCP Configuration for Asterisk
;
[general]
port = 2427
bindaddr = 0.0.0.0
[dlinkgw]
host = 172.16.1.42
context = default
line => aaln/1
line => aaln/2
line => aaln/3
line => aaln/4
But I'm getting errors spew'ing on the * console:
NOTICE[8201]: File chan_mgcp.c, Line 1099 (find_subchannel): Gateway
'172.16.1.42' (and thus its endpoint 'aaln/1') does not exist
NOTICE[8201]: File chan_mgcp.c, Line...
2004 Jun 29
0
MGCP and call waiting, doesn't work.
.../hold, but I never get the second, and it terminates. I flash back over and pick up the first.. Here is some debug info....
*CLI> set verbose 10
-- Accepting call from '9003796075' to '9003790612' on channel 0/1, span 1
-- Executing Dial("Zap/1-1", "MGCP/aaln/2@10.252.240.2|30|tr") in new stack
-- MGCP mgcp_request(aaln/2@10.252.240.2)
-- MGCP cw: -1, dnd: 0, so: 0, sno: 0
-- MGCP mgcp_new(MGCP/aaln/2@10.252.240.2-1) created in state: Down
-- Called aaln/2@10.252.240.2
-- MGCP/aaln/2@10.252.240.2-1 is ringing
-- Endpoint ...
2004 Dec 22
1
MGCP Transaction identifiers
...sing Asterisk and MGCP eyeP Phone and observed that the RSIP and NTFY (methods created by the gateway) use high values in the transaction identifiers, while the RQNT, AUEP, CRCX and DLCX (by the call agent) use low values for it.
I hope I could explain my doubt! Here are some examples:
RSIP 18696 aaln/1@tramontina MGCP 1.0
RQNT 8 aaln/1@tramontina MGCP 1.0
AUEP 9 aaln/1@tramontina MGCP 1.0
RSIP 27232 aaln/1@tramontina MGCP 1.0
RQNT 3 aaln/1@tramontina MGCP 1.0
NTFY 27219 aaln/1@tramontina MGCP 1.0
CRCX 2 aaln/1@tramontina MGCP 1.0
DLCX 26 aaln/1@tramontina MGCP 1.0
Thanks,
Leonardo J. Tramont...
2003 Apr 24
3
new mgcp patch errors
see below
I tried to call 98013356 from the following phone (from mgcp.conf)
[iptlf03]
host = 192.168.33.3
context = default
inbanddtmf = 1
callerid = 22545062
line => aaln/1
Console output:
== Spawn extension (capiring, 9988001133335566, 1) exited non-zero on
'MGCP/aaln/1@iptlf03-1'
-- MGCP mgcp_hangup(MGCP/aaln/1@iptlf03-1) on aaln/1@iptlf03
-- Delete connection 4 aaln/1@iptlf03-1 with new mode: recvonly on callid:
5a4b82ad79f47a70
-- MGCP...
2005 Mar 25
2
MGCP issue
...got no dial tone. Can somebody help with
this isuue?
This is my mgcp.conf and extensions.conf
Thanks
Daniel.
; MGCP Configuration for Asterisk
;
[general]
port = 2427
bindaddr = 192.168.11.20
disallow=all
allow=g729
allow=alaw
allow=ulaw
[192.168.11.200]
context=MGCP
host=192.168.11.200
wcardep=aaln/*
callerid = "test" <8000100>
callwaiting=no
transfer=no
cancallforward=no
dtmfmode=rfc2833
canreinvite=no
singlepath=no
slowsequence=yes
line => aaln/1
callerid= "test" <8000101>
callwaiting=no
transfer=no
cancallforward=no
canreinvite=yes
dtmfmode=rfc2833
line =...
2004 Aug 18
2
Festival Installation - Asterisk 1.0-RC2 && Debian Woody
...the RedHat 9 RPMs for Festival 1.4.2 will not work with
asterisk. Is this also the case with the deb files in Woody? (1.4.2-2.1)
I have tried to use the debian provided package, but I get the following
in the Asterisk console (I've obtusified the phone IP address...):
-- Endpoint 'aaln/1@203.33.246.xx-1' observed 'hd'
-- MGCP mgcp_new(MGCP/aaln/1@203.33.246.xx-1) created in state: Down
-- Endpoint 'aaln/1@203.33.246.xx-1' observed '*'
-- Endpoint 'aaln/1@203.33.246.xx-1' observed '1'
-- Endpoint 'aaln/1@203.33.24...
2006 Mar 10
0
Flash call transfer problem
...lash I can hear for half a second the dial tone, but it stops suddenly. The other phone hear the on hold music and pressing flash key another time I get back to the previous channel.
On the asterisk consolle seems to be all ok, this is whant I can read:
asterisk1*CLI>
-- Swapping 0 for 1 on aaln/3@Monforte_Euripide_9
-- MGCP Muting 0 on aaln/3@Monforte_Euripide_9
-- Started music on hold, class 'default', on channel 'SIP/024390239-1c04'
-- MGCP mgcp_new(MGCP/aaln/3@Monforte_Euripide_9-1) created in state: Down
asterisk1*CLI>
-- Swapping 1 for 0 on aaln/3@...
2004 May 13
0
MGCP channel problem
...bug.
The identifier of first digit (2) is 7152
then asterisk received second digit (4), identifier 7153
and then asterisk received third digit... (2) with identifier 7152
so, asterisk dialed number 24254......
all debug is in attachment
1 headers, 0 lines
Urgent handler
MGCP read:
NTFY 7152 aaln/0@MARV MGCP 1.0 NCS 1.0
N:[217.66.161.5]:2427
X:23f9c13c
O: 2
from 217.66.161.122:2427Verb: 'NTFY', Identifier: '7152', Endpoint: 'aaln/0@MARV', Version: 'MGCP 1.0'
4 headers, 0 lines
Handling request 'NTFY' on aaln/0@MARV
Transmitting:
200 7152 OK
to 217....
2005 Aug 17
1
Comfort Noise incomplete - No translator path exists for channel type MGCP (native 4) to 256
...bian and am still getting the same message below - any comments are greatly appreciated - I did play with the config files with no prevail - the Adit seems to be doing its job per tech support at CAC. I listed my conigs below
I go off hook and get this -
*CLI>
-- MGCP mgcp_new(MGCP/aaln/1@192.168.0.241-1) created in state: Down
*CLI>
I dial 123 (an extension) and get this -
*CLI> Aug 17 09:35:25 NOTICE[26024]: rtp.c:284 process_rfc3389: Comfort noise support incomplete in Asterisk (RFC 3389). Please turn off on client if possible. Client IP: 192.168.0.241
-- Executi...
2004 Apr 12
2
SwissVoice IP10S not able to dial calls
...tup is simple for now, 2 phones: SwissVoice
is ext 7726 and Cisco 7960 (SIP) is ext 7999.
I can call from the Cisco phone and it rings on the SwissVoice phone but
when I dial from the SwissVoice phone I get a busy tone upon dialing the
second digit. The log reads as follows:
-- Endpoint 'aaln/1@10.1.24.112-1' observed 'hd'
-- MGCP mgcp_new(MGCP/aaln/1@10.1.24.112-1) created in state: Down
-- Endpoint 'aaln/1@10.1.24.112-1' observed '7'
-- Endpoint 'aaln/1@10.1.24.112-1' observed '9'
-- Endpoint 'aaln/1@10.1.24.112-1' ob...
2003 Jun 30
3
MGCP with Cisco doesn't work
I'm trying to link up Cisco MGCP-enabled router (residential gateway) with
Asterisk, and it looks like some sort of protocol mismatch, could it be MGCP
0.1 vs 1.0?
Look at this (x.x.x.99 is the router, x.x.x.98 is Asterisk):
MGCP read:
NTFY 2 aaln/0@voip-gw1 MGCP 0.1
X: 0
O: hd
from 192.168.154.99:2427MGCP read:
NTFY 2 aaln/0@voip-gw1 MGCP 0.1
X: 0
O: hd
from 192.168.154.99:2427Verb: 'NTFY', Identifier: '2', Endpoint:
'aaln/0@voip-gw1', Version: 'MGCP 0.1'
3 headers, 0 lines
Handling request 'NTFY' o...