asterisk users - Feb 2005 - Sirrix ISDN Card

How do I test if the card is working or not ? Is there something that I can
do
to get a response from the card ? 
Ive put the card in, installed drivers ect but can't dial out and can't
see
a
response when I try dial in from external number.

Any ideas ?

Thanks
Shaun



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.857 / Virus Database: 584 - Release Date: 10/02/2005

Hi!
> How do I test if the card is working or not ? Is there something that I 
> can
> do
> to get a response from the card ?
> Ive put the card in, installed drivers ect but can't dial out and
can't
> see
> a
> response when I try dial in from external number.
Did you configure groups in sirrix.conf? See 
http://www.voip-info.org/tiki-index.php?page=Asterisk%20config%20sirrix.conf 
for examples. You need to set the "number" parameter correctly or
simply set
"number = +" to receive any call on any number on that port.
IF you have configured ports in sirrix.conf and you startup Asterik that 
loads chan_sirrix, you should see some output in /var/log/messages like 
"Enabling interrupts from ISACx".

When you have configured ports, the LEDs near the RJ45 sockets shall light 
up as soon as Layer 1 is activated (eg. phone is plugged in). Then you can 
enable debugging output from Asterisk (logger.conf) and see some details 
(e.g. when phone requests channel or incoming call is detected), probably 
you need to start Asterisk in console mode (asterisk -vc).

I hope this could help you. If you have further questions about the 
Sirrix.PCI4S0 feel free to contact me by eMail o.senft@sirrix.com.

Regards,
Oskar.