Hi,
I have just installed a Sirrux PC140 card for the first time. Managed
to build the drivers and get * to load them on FC4, but it does not work.
It seems that layer1 in the ISDN is not even activated. The same ISDN
lines connected to a Samsung DCS works so it is not the lines.
I am including my sirrix.conf and the output of some of the * Srx
commands below. Any pointers would be appreciated.
Thank you
Marnus van Niekerk
--
; global settings
[Global]
internationalprefix = 09
nationalprefix = 0
;crypto_app = /root/cvs/sirrix-pci/crypto/crypt
; external link
[out]
mode = TE
ptp = no
context = incoming-isdn
language = en
echocancel = speex
ports = 0000+0001+0002
extension = +
number = +
cfnotify = no
cfu = no
cfnr = no
cfb = no
aocd = no
colp = no
redir = no
notify = yes
callerid = +
providetones = yes
;crypto = no
master = yes
--
asterisk*CLI> Srx reload
Feb 5 20:55:23 WARNING[4900]: chan_sirrix.c:6961 __reload: Reload of
Sirrix driver configuration will take about 2 seconds!
Feb 5 20:55:23 NOTICE[4900]: layer1_user.c:474 l1u_master_set: Setting
INTERNAL as master
Feb 5 20:55:23 NOTICE[4155]: layer1_user.c:607 l1u_run_read:
L1M1_SHUTDOWN|CONFIRM for port 0000
Feb 5 20:55:23 NOTICE[4155]: layer1_user.c:607 l1u_run_read:
L1M1_SHUTDOWN|CONFIRM for port 0001
Feb 5 20:55:23 NOTICE[4155]: layer1_user.c:607 l1u_run_read:
L1M1_SHUTDOWN|CONFIRM for port 0002
== Parsing '/etc/asterisk/sirrix.conf': Found
Feb 5 20:55:25 NOTICE[4900]: chan_sirrix.c:6974 __reload: Sirrix driver
configuration reloaded!
Feb 5 20:55:26 NOTICE[4155]: layer1_user.c:211 l1u_from_kernel:
L1M1_STARTUP|CONFIRM for port 0000
Feb 5 20:55:26 NOTICE[4155]: layer1_user.c:211 l1u_from_kernel:
L1M1_STARTUP|CONFIRM for port 0001
Feb 5 20:55:26 NOTICE[4155]: layer1_user.c:211 l1u_from_kernel:
L1M1_STARTUP|CONFIRM for port 0002
asterisk*CLI> Srx show chans
Port Chan InUse
0x0000 0x01 0
0x0000 0x02 0
0x0001 0x01 0
0x0001 0x02 0
0x0002 0x01 0
0x0002 0x02 0
asterisk*CLI> Srx show layers
MASTER: internal
l1=091dc668: port=0x0000, type=BA, mode=TE, ptp=0, ma=1, act=0:
l2h=b510ff20
l2=b5100fa8: tei= -1, st='ST_L2_1_TEI_UNASSIGNED':
l3h=b5111368: cr_out={ }, cr_in={ }
l1=091e0868: port=0x0001, type=BA, mode=TE, ptp=0, ma=1, act=0:
l2h=b51165e8
l2=b51168f0: tei= -1, st='ST_L2_1_TEI_UNASSIGNED':
l3h=b5103e00: cr_out={ }, cr_in={ }
l1=091e0270: port=0x0002, type=BA, mode=TE, ptp=0, ma=1, act=0:
l2h=b5109098
l2=b510a018: tei= -1, st='ST_L2_1_TEI_UNASSIGNED':
l3h=b510a828: cr_out={ }, cr_in={ }
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060205/f0c2702f/attachment.htm