similar to: Sirrix ISDN Card

Hello all! Sirrix AG, Saarbr?cken (manufacturer of the Sirrix.PCI4S0 4-port ISDN card for Asterisk) has released the new Asterisk dialplan command PPPD (app_pppd). It allows to connect a Linux PPP daemon to an arbitrary digital (ISDN) Asterisk channel to provide RAS dialin and dialout. The PPPD command has successfully been tested with Sirrix.PCI4S0 cards and a standard ISDN4Linux ipppd "on

Hi guys, I'm running a Sirrix PCI4S0 quad BRI card in a box with Asterisk CVS-HEAD (20050614). Something I've come across is that with 'echocancel = yes' in /etc/asterisk/sirrix.conf the echo is unbearably loud - so loud in fact that the echo distorts. To remedy this I've set 'echocancel = no' and disabled the echo cancellation. With the echo cancellation disabled

Hello! I am selling hardware I have been using in various Asterisk test installations. If you are interested in buying all or any of the following items please reply off list. I got a few * X100P clones * Sirrix PCI4S0 ISDN BRI cards (+ 1 Sirrix S0 voltage/power supply) * 1 Polycom Soundpoint IP 500 (+ Plantronics headset) * Conrad HFC-S cards to give away. Some of the pieces are unused,

Hi, I have just installed a Sirrux PC140 card for the first time. Managed to build the drivers and get * to load them on FC4, but it does not work. It seems that layer1 in the ISDN is not even activated. The same ISDN lines connected to a Samsung DCS works so it is not the lines. I am including my sirrix.conf and the output of some of the * Srx commands below. Any pointers would be

Hi all, How are things going ? Is there a way for me to individually identify each BRI channel on the Sirrix quad BRI board. The reason I ask is because our client uses the "Asterisk Flash Operator Panel" to monitor its external lines and transfer calls from the lines to the various SIP phones. The "Flash Operator Panel" requires that we set a static value for each line or

Hi guys, How's things going ? Got a bit of a weird one here that I've been unable to solve. I have a Panasonic PBX linked to a Sirrix Quad BRI card that is running in TE (ptp) mode in a Asterisk box - this then links through Internet to another Asterisk box via IAX2. When a user on the Panasonic PBX system dials the extension of my Sirrix Asterisk box, Asterisk answers and says

I have a test install set up as follows Grandstream 102 ---- Asterisk ---- X100P ---- Adtran Express 3000 --- ISDN line to PSTN Most things I want to do work fine except I do have some intermittent problems with an echo. I am assuming that this is created in the link between the X100P and the Adtran terminal adaptor. I am not sure of the proper terms but on the PSTN side of the Adtran there is

Hi, folks: I remain intrigued by the gap in BRI implementation between North America and Europe, and I wanted to get feedback from the list members on the matter. I'm seriously considering making the leap in our office. In Europe, the idea that an office that does not have enough lines to justify PRI would use analog lines is perceived as technologically backwards, and yet that's what

Good day all Is there someone who's got a sirrix 4 port working in NT mode I got one working good in TE mode. Apparently I must add 8 jumpers in make the cross cable a straight cable But what about the sirrix.conf? Do I just change the mode from TE to NT? Please Help or advice? Thanks Altus

Hi all, I have a sirrix bri card, connected to 2 ISDN lines.I used to get a lot of slips on it, so i put the 'master' setting to 'yes'. But every couple of hours the machine completly hangs, and i have to reboot it. I only get 1 or 2 slips,I dont know whats wrong? yusuf

Hello everyone. I need a BRI ISDN card that works in Romania. I already have one of the "Cologne HFC-S" PCI cards and it doesn't work right, it's junk. I get waaaay too much echo using it. I'm now "shopping" for a better card. Can anyone recommend me a card that "fits" the following: (a) Costs less then $1000 / 750 euro (b) Has one or (preferably) two

I wrote a week or two ago about a problem I was having with a TDM400P with 2 FXS. The problem was reliable fax transfers. There were often slow or had communication failures during transmission. Richard replied to my post and told me this is an ongoing problem that might have a solution in the weeks to come. However, I was wondering if anyone had any alternate solutions for faxing with an

Get the latest code and look at mdf.c. This module is the echo canceller. Tom bast@sirrix.com wrote: > > Hello MailingList! > > I'm searching a Echo Cancellation to implement it in my own project. I > found > in a newsgroup a posting that you've programmed an open-source > EC-Algorithm. > > My Question: > Is it possible to get the source code of the

Hello all. I've set up a testing environment with two Windows DCs. The first, called DCA, is serving the domain DOMA and is running Windows 2003. The second is called DCB and serves DOMB on Windows 2008. The Samba machine I'm setting up (named ULYSSES) should be able to authenticate users from both domains for shell login. I've installed Samba 3.2.3 as a Debian package and closely

Hi, I'm using app_pppd with a Digium-PRI-card for PPP connections. I had some strange problems with some IP packets passing and some not, e.g. ftp login went well, but as soon as I tried to up- or download a file, noting was transferred. I finally guessed, it must have to do something with the packet size. Then I started pppd with the parameters mtu 296 and mru 296 as in further times with

Hi Sender, I am on leave until 18-Aug (inclusive) and may not be able to access email and answer the phone. I will response to you as soon as I can. Best regards, Huy.

Hello! I finally found a working solution. calling divactrl with the parameter -n [0..20] gives the DID-length means, if you wanna have 123-XXX in digit-wise mode, then call divactrl load -c 1 -n 3 -f ETSI and the card will wait for n digits. regards, Sebastian -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]

Hi list, I am searching for a possibility to do a certain call transfer method which is called "path replacement" in QSIG. But I want to do that in DSS1 (EuroISDN). If my asterisk does a call transfer I want the machine to signalize on dchan that the call path has to be replaced to a direct connect between the caller and the called, i.e. my machine is to hang up after the transfer and

Good day all What is the amount of calls that asterisk can handle,SIP and from/to PSTN -- Thanks Altus Snyman Stormcorp Network Solutions +27 11 8071141 exten 301

Hello all, I just got the latest cvs snapshot and I'm trying to compile asterisk.. When I run nefeli:/usr/src/asterisk/zaptel# make clean; make linux26 Compile stops with errors... /usr/src/asterisk/zaptel/zaptel.c:6509: warning: passing argument 2 of 'class_device_create' makes pointer from integer without a cast /usr/src/asterisk/zaptel/zaptel.c:6509: warning: passing argument 3