Hi all, Hopefully you can help me. I want to turn off the audio "Call Waiting" beep that plays during a call. I have found the line in the indications.conf for Call Waiting but apart from setting the frequency to zero or the length to zero is there a proper way to disable this functionality. thanks very much alex This email and any attached files are confidential and copyright protected. If you are not the addressee, any dissemination, distribution or copying of this communication is strictly prohibited. Unless otherwise expressly agreed in writing, nothing stated in this communication shall be legally binding.
On Sat, 2005-01-29 at 00:00 +0000, Alex Barnes wrote:> Hi all, > > Hopefully you can help me. > > I want to turn off the audio "Call Waiting" beep that plays during a > call. > > I have found the line in the indications.conf for Call Waiting but > apart from setting the frequency to zero or the length to zero is > there a proper way to disable this functionality.how do you expect to get the indication that you have a callwaiting call? The beep is a guard that hides the caller-id fsk spill also. So you can't get callwaiting-callerid and not have a beep.> This email and any attached files are confidential and copyright > protected. If you are not the addressee, any dissemination, > distribution or copying of this communication is strictly prohibited. > Unless otherwise expressly agreed in writing, nothing stated in this > communication shall be legally binding.Since you haven't given me written authorization, does that mean your disclaimer isn't legally binding either? Stupid disclaimer people. -- Steven Critchfield <critch@basesys.com>
assuming a ZAP interface, just set callwaiting=no callwaitingcallerid=no in zapata.conf Cheers, Jon. On Friday 28 January 2005 06:00 pm, Alex Barnes wrote:> Hi all, > > Hopefully you can help me. > > I want to turn off the audio "Call Waiting" beep that plays during a call. > > I have found the line in the indications.conf for Call Waiting but apart > from setting the frequency to zero or the length to zero is there a proper > way to disable this functionality. > > thanks very much > > alex > > > This email and any attached files are confidential and copyright protected. > If you are not the addressee, any dissemination, distribution or copying > of this communication is strictly prohibited. Unless otherwise expressly > agreed in writing, nothing stated in this communication shall be legally > binding.
> assuming a ZAP interface, just set > > callwaiting=no > callwaitingcallerid=no > > in zapata.confcallwaiting options in zapata.conf are ignored with my tdm cards and the ol x100p. I set callwaiting,callwaitingcallerid =no, stop asterisk,unload modules, reload tdm and zaptel, ztcfg, restart, and I still get call waiting beeps. Either I am daft, or its seems to be a Setgroup-Checkgroup thing from HEAD. JJay __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Thanks for the replies everyone> how do you expect to get the indication that you have a > callwaiting call?The whole point is I don't want it.>The beep is a guard that hides the > caller-id fsk spill also. So you can't get > callwaiting-callerid and not have a beep. >I don't really need that either, users can see whos waiting on hold for them via the web page so anything caller waiting related is fine but only as long as it doesn't have negative impact on the call quality. Setting the indication durations to zero has helped hugely as the sound is far less intrusive now. Also all of the end points are essentially SIP phones (or DECT phones plugged into 2102's) so callerID doesn't need to be passed inbound. I will try what Jon sugggests: Zaptel.conf callwaiting=no callwaitingcallerid=no It didn't really occur to me as was looking at configuring the SIP side. This email and any attached files are confidential and copyright protected. If you are not the addressee, any dissemination, distribution or copying of this communication is strictly prohibited. Unless otherwise expressly agreed in writing, nothing stated in this communication shall be legally binding.
Seemingly Similar Threads
- Why do Zaptel calls drop all of a sudden? Could busy detect be the problem?
- How to remove the call waiting tone without disabling callwaiting?
- Call waiting on X100P
- What makes TDM400 FXS Connection to TELCO go into Off Hook State?
- CallerID Debug On Zap/POTS Channel