asterisk users - Jan 2005 - Making digital/data calls through asterisk

Hi!

We planing to by some PRI/BRI equipment to replace our existing telephone
system.
So I am going to try this:
ISDN Card Outgoing Digital Call /
	Capability: Unrestricted digital information
-> octobri -> asterisk -> TE410E
-> Internet Provider / Receiver for Capability Unrestricted digital
information

The question is: Is asterisk possible of transmit this digital call to the
destination and what is needed to achieve this?
I  found out that a variable called CALLTYPE exists, but I could not find
out, if the Dial applications set the capability for the outgoing call
correct?

Thanks in advance for our help,

Andr?

There is the ITU V.150 that defines a framework for transmiting modem signals
using VoIP,
in a efficient way, but there is no implementation other that R&D in big
companies.

If you only want to forward an analog modem call over a PRI to the PSTN, you may
need a
channel bank connected to the TE410E card. The use of a TDM400 from many post on
the
lists seems unreliable for low speed faxes, so i guess it would be a nightmare
to use
with a modem.

And if you are using an IDSN modem, well, i don't know if anybody has
managed to put that
to work. If you manage to make it work, please add an entry in the wiki for
that, i think
it would be "a little step for a man, but a great leap to asterisk".

Or you may be reconsider this setup and if the thing you want is to use some
channels for
voice and others for data over de PRI, take a look in the hdlc setup for the
TE410E, that
works link any NIC in /dev/hdlcX.


"A. Valentin" <a.valentin@webmasterorder.de>
wrote:
>Hi!
>
>We planing to by some PRI/BRI equipment to replace our existing telephone
system.
>So I am going to try this:
>ISDN Card Outgoing Digital Call /
>	Capability: Unrestricted digital information
> -> octobri -> asterisk -> TE410E
> -> Internet Provider / Receiver for Capability Unrestricted digital
>information
>
>The question is: Is asterisk possible of transmit this digital call to the
>destination and what is needed to achieve this?
>I  found out that a variable called CALLTYPE exists, but I could not find
>out, if the Dial applications set the capability for the outgoing call
correct?
>
>Thanks in advance for our help,
>
> André

====Miguel Ruiz Velasco

Version: OpenKeyServer v1.2
Comment: Extracted from belgium.keyserver.net
Signature: 0x59831109


		
__________________________________ 
Do you Yahoo!? 
The all-new My Yahoo! - Get yours free! 
http://my.yahoo.com