search for: te410

I just noticed that the new TE410 only supports 3.3v PCI. How do you know if it will work in your machine? It's not something commonly listed in your motherboard specs.... I was thinking about getting one for an Athlon 750 that is a spare box I'm doing testing on... (Original SlotA) -G

Hello List Just want to check if anybody else is having this problem. Every time the PRI connections are disconnected, the card freezes, and I have to reload the driver, to make it work again. We are very seriously considering switching to Sangoma at this moment, due to this and other problems, but I want to know if there is a solution, and to make sure it isn't asterisk that's freezing

This afternoon I finally figured out more with regarding to a strange clock-slip problem we have on our asterisk box. We have two TE410s, in E1 mode: TE410P version c01a009b They have their own interrupts: 66: 781648298 783747388 IO-APIC-level t4xxp 233: 253890977 1311504670 IO-APIC-level t4xxp They have their full 31 channels: span=3,0,0,ccs,hdb3,crc4 bchan=63-77,79-93 dchan=78 span=7,0,0,ccs,hdb3,crc4 bchan=187...

I encountered this strange problem which is I can call into Asterisk box but I cannot call out. I was successful before using exactly the same euroISDN line but with TE110 and different versions of Asterisk. This time, I am using: . TE410 . Asterisk 1.4.13 . Zaptel 1.4.6 . Libpri 1.4.2 1) I put the following into extensions.conf to get to the outside line exten => 0,1,Dial(Zap/1) 2) When I hit '0' on the phone, it came back like this on the console: [Feb 29 18:15:40] WARNING[7146]: chan_zap.c:11120 process_zap: Ign...

If I remove the eco cancellation module from a TE411P card, will it work as a plain TE410P? -- Carlos Chavez Prats Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 191 bytes Desc: This is a digita...

Hello, I would like to have some comparison between E1 cards from Digium and those from Eicon for a VOIP - ISDN Gateway. How does they compare on the echo cancel point of view? Is the echocancellation code for E400 good enough for production environment? Best regards, Daniel -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz -

We are located in Belgium and just ordered a PRA line, the telco asked the following questions : - 120 or 75 ohm ? - Support for CRC4 yes/no ? - B channels in 2 way ? We will buy a digium card but which one should we buy ? could anybody help me with this ? Thank you Michael Sorry for the previous html mail DISCLAIMER: The content of this e-mail message does not constitute a commitment

I'd like to put up on the wiki the known working 3.3v MotherBoards people are using in production... I am very interested w/ppl with dual te410's with lots of concurrent channels in use Please dont post just your fav spec boards JUST ppl with working stable installs with TE410s, if possible with url, if not the exact board number & ill google it when i post to the wiki thxs in advance

Hi! We planing to by some PRI/BRI equipment to replace our existing telephone system. So I am going to try this: ISDN Card Outgoing Digital Call / Capability: Unrestricted digital information -> octobri -> asterisk -> TE410E -> Internet Provider / Receiver for Capability Unrestricted digital information The question is: Is asterisk possible of transmit this digital call to the destination and what is needed to achieve this? I found out that a variable called CALLTYPE exists, but I could not find out, if the Dial...

...installed on a Dell 2850 dual-Xeon 3.0Ghz box with 2GB of memory. This is serving about 75 sip clients, Polycom500's and 600's. We are running into problems with the memory. Asterisk, right now, is using about 1.8GB of system memory. I am using Asterisk 1.0.7, Zaptel 1.0.7 with Digiums TE410 1xT1 RBS and 1xT1 PRI, Libpri 1.0.7 on Fedora Core 3. My question; is this normal or do I need more memory or is there a more serious underlying problem.

Hi I plan to setup an asterisk box to function as a SIP gateway forwarding lots of calls to/from a backend of several other asterisk boxes, each with a TE410 card for PSTN connectivity. It will only gateway the calls into the PSTN gateways. No transcoding is planned - only plain ALAW. How many concurrent calls would you think this can handle? I'm asked to plan a system that can handle >1000 concurrent calls... thanks for any input regards...

I could swear that I remember seeing some announcement somewhere that Zaptel now supported drop-and-insert across spans on a TE410P, but now I can't find it. Am I imagining this? We just got our TE410 up and running, and if we could cross-connect digital channels with it, I think we'd buy another one for the remote end (instead of using the T100P we have). Searching Google ("zaptel dax", "asterisk cro...

Hello List I am having a rather big problem with a sangoma A104 card, I just installed to replace a Digium TE410 card, that was acting up. But now we have a problem with the sangoma card. It runs great after being started, and calls proceed as normal, but after about 1 hour, it stops being able to make and receive calls. If I run wanpipemon debug, can see that the card still receives packets from the IS...

Can anyone clue me in about these T400 T1 cards I see advertised? I hear they are Digium Clones. Is there some reason to avoid these? How do they compare to TE410P's for example. Bart

...winkle: Tue 18:57:51 nikhil: you have the following registrations <sip:2001 at 172.26.48.208 <sip%3A2001 at 172.26.48.208>>;expires=3013 208 is ip of the asterisk server. on the server on doing 'sip show peers' , it shows the user and the ip but status is unmonitored. debian-te410*CLI> sip show peers Name/username Host Dyn Nat ACL Port Status wlg-gateway 202.7.4.40 5060 Unmonitored 2002/2002 (Unspecified) D N 0 Unmonitored 2001/2001 172.26.48.113 D N...

I've got a handful of T1s going into a TE410. When I place calls into the system over these T1s, the system either doesn't decode all of the DTMF digits or it decodes ones that aren't there. When the system places calls out, there is no problem doing the DTMF detection. Everything works great.

I've seen this question asked before but haven't seen a definative answer. Does the e100p work in australia? Did any one who was asking the question before bite the bullet and get one? I can get a te410 if i really have to but would prefer to stay with the cheaper option. Any comments appreciated, Thanks ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/

Hi, Is there anybody in this list who had experience with two TE410 cards on a server ? I know that the cards can?t share IRQs and I?m seeing to have two cards on a x335 IBM Xeon server. TIA -- Juanjo sin .sig

...Normally G.703 lines with G.704 framing is called Structured G.703. Carriers offer G.704 when their network is built up on a cross-connect basis, and will offer unstructured G.703 when their infrastructure is based upon multiplexers." But, what about Asterisk and Digium TDM interface TE405/TE410 ? Does it support Structured and Unstructured framing? Which one do you recommend? Thanks in advance -- Alex G Robertson NOC - Microlink

Hi, I'm going to be setting up some machines with 4 port E1 cards from Digium and I'm being told that TE410 is incompatable with several Intel chipsets including the ones in a lot of Dell server systems. Is this true? I can't find any confirmed details on the mailing list about it. Also, the email seems to imply that the TE405P will be fine, though it doesn't say that explicitly. Basically, is...