Okay, now I am really confused. I have two PRI's coming in from two different Carriers (QWEST and ELI), both of them are supposed to be setup to pass name and number on incoming calls. Problem that I am having is that I am not receiving inbound caller id name on either PRI, the only thing that both carriers have in common is that I am terminating into a DMS switch at the carrier. Observations: Caller ID Name dose not show up in the CDR records. PRI intense debug never sees the FACILITY IE message. I have included my conf files bellow, any help would be greatly appreciated. zaptel.conf span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs span=3,3,0,esf,b8zs span=4,4,0,esf,b8zs bchan=1-23,25-47,49-71,73-95 dchan=24,48,72,96 loadzone = us defaultzone=us zapata.conf [channels] echocancel=yes echotraining=800 musiconhold=default ;ELI T1s switchtype=national nsf=none context=default signalling=pri_cpe group=1 channel => 1-23,25-47,49-71 ;Qwest T1 switchtype=national nsf=none context=default signalling=pri_cpe group=2 channel => 73-95 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041215/85538816/attachment.htm
Eric Wieling aka ManxPower
2004-Dec-15 11:27 UTC
[Asterisk-Users] No Caller ID Name PRI NI2.
Chris Modesitt wrote:> Okay, now I am really confused. I have two PRI's coming in from two > different Carriers (QWEST and ELI), both of them are supposed to be setup to > pass name and number on incoming calls. Problem that I am having is that I > am not receiving inbound caller id name on either PRI, the only thing that > both carriers have in common is that I am terminating into a DMS switch at > the carrier.immediate=yes would cause this. --Eric -- I am seeking part or full time employment in the Greater Toronto Area, My preference is part time employment with some telecommuting, but all offers will be considered. Contact eric at fnords.org.
On Wed, Dec 15, 2004 at 10:52:07AM -0700, Chris Modesitt wrote:> Okay, now I am really confused. I have two PRI's coming in from two > different Carriers (QWEST and ELI), both of them are supposed to be setup to > pass name and number on incoming calls. Problem that I am having is that I > am not receiving inbound caller id name on either PRI, the only thing that > both carriers have in common is that I am terminating into a DMS switch at > the carrier. > > > > Observations: > > > > Caller ID Name dose not show up in the CDR records. > > PRI intense debug never sees the FACILITY IE message.Can you post the pri intense debug so that we can look at it? Matthew Fredrickson