To all:
I am researching the feasibility of replacing our current PBX (ATT
Partner Plus) with an * PBX. I have purchased an X101P card and I have
* running of a FC2 machine. The X101P is connected to an extension on
our current PBX. Many archives exists regarding X101P cards but I just
need some guidance. First the X101P did not detect a ring, so I found
an email where someone reconfigured the MINPEGTIME by decreasing the
amount (did that and it seamed to work). Now sometimes it seams to get
stuck and not detect a ring unless is repeatedly stop and restart *.
Output form * in CLI shows a hang-up:
Hang-up: channel: 1 index = 0, normal = 12, callwait = -1, thirdcall = -1
disabled echo cancellation on channel 1
Set option TDD MODE, value: OFF(0) on Zap/1-1
Updated conferencing on 1, with 0 conference users
-- Hungup 'Zap/1-1'
I assume that this means I am not having a trouble detecting a hangup?
Is the X101P a finicky card (and perhaps a bad choice)? Or am I just not
setting things right (and stupid).
--
------------------------------------------------------------------------
Prototypes
Patterns
Models
Dies
Fixtures
------------------------------------------------------------------------
Please visit www.jppattern.com <http://www.jppattern.com/> for more
information about J.P. Pattern, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041201/d1e408b6/attachment.htm
