asterisk users - Aug 2005 - How to shorten ringing stop detection on X101P clone?

When x101p clone receive ring signal from phone line, my voip phone
start ringing. But, if caller hang-up at some time, phone continues to
ringing 10 second more. How can I shorten that time?

Pause betwen incoming rings on my phone line is 4s, so when x101p clone
(wcfxo driver) do not receive next ring signal after 4.5 sec, call
should be consider as ended.

What should I change to set that time (4.5 sec) for incoming ring end
detection?

Hello Goran,

Modify your /etc/asterisk/zapata.conf like this :

busydetect=yes
busycount=3

And, of course, you must have chosen your correct country for ringing mode
in your /etc/zaptel.conf file :

loadzone=fr
defaultzone=fr

I am in France  :-)

Good luck !

Best Regards,
Francois BERGERET,
France.

-----Message d'origine-----
De : asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] De la part de Goran Dj.
Envoy? : jeudi 1 septembre 2005 02:26
? : Asterisk Users Mailing List - Non-Commercial Discussion
Objet : [Asterisk-Users] How to shorten ringing stop detection on
X101Pclone?


When x101p clone receive ring signal from phone line, my voip phone start
ringing. But, if caller hang-up at some time, phone continues to ringing 10
second more. How can I shorten that time?

Pause betwen incoming rings on my phone line is 4s, so when x101p clone
(wcfxo driver) do not receive next ring signal after 4.5 sec, call should be
consider as ended.

What should I change to set that time (4.5 sec) for incoming ring end
detection?


_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

> Pause betwen incoming rings on my phone line is 4s, so when x101p
clone
> (wcfxo driver) do not receive next ring signal after 4.5 sec, call
> should be consider as ended.
>
> What should I change to set that time (4.5 sec) for incoming ring end
> detection?
I measured, event "-- Hungup 'Zap/1-1'" is shown exactly 8 sec
after
last detected ring (on X101P), and my voip phone continues to ringing
during that time (that's bad). I want to cut that time to 4.5 sec. How
to do that?

I tried to change in zapata.h some lines:
#define ZT_DEFAULT_RINGTIME 500
#define ZT_LOOPCODE_TIME 3000
#define ZT_RINGOFFTIME 2000
but with no effects. "Hungup" is still shown 8 sec after last ring.