search for: 400p

Are there any other relatively low cost analog cards available? I'm interested in finding something that might work a bit more reliably than the TDM-400P.... regards, Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050213/d772539e/attachment.htm

Hi all, I have a Digium TDM 400P at several locations. Once and again I'll need to restart the drivers because there is no ringing. Does anyone know a fix for this problem? Greatings Johan -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachmen...

Has anyone figured out how to power a Digium TDM 400P card in a Dell 1750 server? I opened the server and noticed that there is no access to 4 pin power to power the card. Is there some sort of adapter that I need to power the Digium card in a Dell Server? I see that the 1750 is listed on the Wiki. How have others powered the TDM400P in a Dell...

Hi everybody, I have 3 TDM400P installed in a machine,and though the 4 ports of the first card work fine, some ports on the other two have low or no signal and a noise instead. Can someone help? Thanx __________________________________ Do you Yahoo!? Exclusive Video Premiere - Britney Spears http://launch.yahoo.com/promos/bri...

It is a cable 4-5 meters long that has handssets connected I don't think its a matter of a distance __________________________________ Do you Yahoo!? Exclusive Video Premiere - Britney Spears http://launch.yahoo.com/promos/britneyspears/

Hey, We are deploying an Asterisk machine in Malaysia for a client. The machine has a TDM400P with 2 x FXO & 2 x FXS. I'm wondering if there are any Malaysian users out there who might be able to help me out with a running zap config for their phone system. Cheers, Darryl.

Hi. Ever since I bought my Digium 400P with 1 FXS and 1FXO module, once in a while I hear what sounds like a touchtone in my ear on a phone hooked up to the FXS module. This was not heard by the other side, and although it was annoying, it was not too much of a problem till I was using the asterisk 1.4 (rev 46317) and the beta of zapte...

I'm running a TDM-400P with 2 x FXS and 2 x FXO. I'm finding that there seems to be an odd relationship to sound quality on the card to my local when connecting via a SIP client. When I'm on my local network, if I connect to Asterisk via a SIP client (such as x-pro), and dial an outside line through the card,...

Hi, I'm just starting out with Asterisk, in combination with a TDM400, filled with 2 FXS on channels 1 and 2, and 1 FXO on 4. Having just started, all I want right now is to be able to answer incoming calls on a phone connected to channel 1. The trouble is the caller id. I have caller id enabled on my line, my phone supports it, and when I connect the phone directly to the line, it works.

Hi I have had a TDM400p for a year now, recently I have been having problems with 'static' noise completely drowning out a call ( inbound only not on outbound calls)., has anyone else experience this and able to offer a solution. Also on inbound calls for the first 1/2 second or so I get a 'ray' gun s...

Using a TDM400P in the UK nearly works fine, but I have a last remaining problem in that if the incoming is ringing and then the caller hangs up, asterisk takes another couple of rings before it spots the hangup. This is annoying in that I sometimes get phantom calls late at night (possibly due to call waiting...

(Sorry of this appears in the list twice, but I wasn't sure if it was blocked or not) Hi there, I'm having a problem with my TDM-400P which has been working like a charm up until very recently. It started to fail last week, and so I was hoping someone could illuminate me with some information as to why. Its configuration is as follows: ------------ FXS (green) module is in position 1, closest to the bracket. This appears to be...

A bit about my experience with the TDM-04 FXO. Only saw a few post on this subject, thought I would contribute a little about my experience to save others the hassle. a. As an earlier poster noted, the driver for the FXO is in the wcfxs module. Perhaps it should be renamed to something less confusing. b. You need the zaptel,zapata libraries from the cvs, the ones with Asterisk 0.7.2 won't

Hi I wonder if anyone has any sugestions I have had a TDM400 for a couple of years, and I have always had problems with noise on the line, so tonight I have been doing some research and have found that if I load the CPU dahdi_test has almost perfect results and no noise dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.997% 99.999% 99.998% 99.997% 99.999% 99.998% 99.998%

Under linux-2.6.38 I was able to compile and install dahdi, however when I ran dahdi_cfg -vv, I got an invalid argument on my fxs port. I have an old 400P card with one FXS and one FXO module. I have dahdi-trunk r9868 and dahdi-tools-trunk 8670. How can I get this to work correctly? Thanks in advance for any ideas. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici c...

Hi. I am using asterisk 1.4 (latest as of today) and zaptel 1.4 (latest as of today) and I cannot dial out using my 400P card with one fxs module and one fxo module. I am using kernel 2.6.24 and get the following log entries: [Feb 25 17:28:13] VERBOSE[25071] logger.c: -- Executing [s at macro-dialout-trunk:23] Dial("Zap/1-1", "ZAP/4/www411|300|wW") in new stack [Feb 25 17:28:13] DEBUG[25071]...

With regards to the IRQ sharing situation on 400P/X100P cards how would I know if I can use IO-APIC? I am running RHEL 3 on a Dell PowerEdge 1400SC. RHEL installs without IO-APIC support. Is this because RH is overly conservative or because it queried my machine and that is the appropriate option? Does RHEL 3 have a kernel for IO-APIC if appropr...

...SPONSE: No automated response will occur. IMPACT: Fault tolerance of the pool may be compromised. REC-ACTION: Run ''zpool status -x'' and replace the bad device. panic[cpu0]/thread=2a1011d3cc0: ZFS: I/O failure (write on <unknown> off 0: zio 60007432bc0 [L0 unallocated] 4000L/400P DVA[0]=<0:b000:400> DVA[1]=<0:120a000:400> fletcher4 lzjb BE contiguous birth=6 fill=0 cksum=672165b9e7:328e78ae25fd:ed007c9008f5f:34c05b10900b668): error 6 000002a1011d3740 zfs:zio_done+284 (60007432bc0, 0, a8, 7035dbf0, 0, 60006fa9700) %l0-3: 00000600036d4b40 000000007035d800 00000...

...a PCI card to move, but if the consensus is that the voice quality and support for the digium board is the best, then that's what I'll do.. So, any comments on relative quality of these devices, and/or ones I've missed? 1: Grandstream HT-488 2: Zoom 5801/5802 3: DGM-TDM02B (TDM 400P with two FXOs) Are there any IAX2 FXOs that I'm missing? That seems to be an area that's oddly not taken care of... Any hints would be greatly appreciated! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-u...

I have a TDM-400P with one FXO module. On an incoming call, I have set Asterisk to dial my phone (exten => s,1,Dial(IAX2/carey)), which is basically the only thing in my dialplan. When the call is answered by the PSTN phone first, or when the ringing call is hung up, Asterisk keeps ringing for 5+ seconds, which...