asterisk users - Sep 2004 - Timing source on SMP system - Disable RTC forzaprtc

Kristian,

I have 2 X100P cards but neither work on my Compaq DL360 G2. The system
will not even boot! Take a look at my initial post and let me know if
you have any other advice. Regardless, thanks for your post!

------------------------------------------------------------------------
-

I need a timing device for the DL360G2 for conferencing and meetme.
For a timing device I have 2 X100P cards but neither will work in my
DL360G2. The system will not even boot with either card in the system.
Other PCI cards seems to work fine. I called Digium support and was
told that there must be a conflict between the card and my Compaq
DL360G2.

I then moved on to ztdummy. I'm sure the DL360 G2 has a OHBI rather
than UHBI controller. That said, I got this message during modprobe
ztdummy:

[root@impbx01 zaptel]# modprobe ztdummy

/lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: init_module:
No such device

Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.

You may find more information in syslog or the output from dmesg

/lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: insmod
/lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o failed

/lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: insmod ztdummy
failed

I then moved on to zaprtc. However, I was told that this solution will
not work with SMP systems. My DL360G2 is a dual proc machine.

I'm running out of options here...please advise.

Thanks,

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kristian
Kielhofner
Sent: Sunday, September 19, 2004 1:29 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Timing source on SMP system - Disable RTC
forzaprtc

Chad Brown wrote:
> Does anyone know where to disable rtc support on redhat 9.0 using make
> menuconfig?
> 
> I thought I disabled it but still got the following error when trying
to
> make zaprtc:
> 
> zaprtc.c:109: storage size of `rtc_irq_timer' isn't known
> zaprtc.c:719: storage size of `rtc_fops' isn't known
> zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static'
but
> never defined
> make: *** [zaprtc.o] Error 1
> 
> Thanks,
> 
> Chad
Chad,

	Real time clock under character devices in make menuconfig.  I
just did 
this on RHEL 3 WS (my laptop), so it should be similar.  Also, good luck

with this on an SMP box, because many people (on the list and elsewhere)

can tell you that it is certainly not an optimal solution.  If you have 
an SMP box, and want to do conferencing, buy some Digium hardware!

--
Kristian Kielhofner
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Chad Brown wrote:
> Kristian,
> 
> I have 2 X100P cards but neither work on my Compaq DL360 G2. The system
> will not even boot! Take a look at my initial post and let me know if
> you have any other advice. Regardless, thanks for your post!
> 
Oh that was you?  I read that post earlier but obviously didn't put it 
together...  I don't know about this, but have you tried an add-on 
usb-uhci controller (your motherboard is OHCI, right)?  I don't know if 
that would work, but you could try it...  What about a TDM400 with a 
module (any module FXS/FXO)?

--
Kristian Kielhofner