search for: dl360

I'm trying to setup a LVM mirror on 2 iSCS targets, but can't. I have added both /dev/sda & /dev/sdb to the LVM-RAID PV, and both have 500GB space. [root at HP-DL360 by-path]# pvscan PV /dev/cciss/c0d0p2 VG LVM lvm2 [136.59 GB / 2.69 GB free] PV /dev/sda VG LVM-RAID lvm2 [500.00 GB / 490.00 GB free] PV /dev/sdb VG LVM-RAID lvm2 [502.70 GB / 492.70 GB free] Total: 3 [1.11 TB] / in use: 3 [1.11 TB] / in no VG: 0 [0 ]...

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty pl...

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't...

i'm running on vmware system and HP proliant DL360 G5 servers on wmware, on boot i have the following message: ----------------------------- Applying Intel Microcode update: don't know to make device "cpu/microcode" [OK] ----------------------------- and on a HP proliant DL360 G5 server , on boot i have too the following mess...

Hello Guys, I use Xen Server 3.4.3 version, with kernel xen 2.6.18.194. Recently we change any server for HP DL360 G7 with HP Smart Array P410i Controller, but when i install the Xen and reboot machine, the machine does not back because kernel panic happen. I checked the grub conf and see than after install xen server, the line "kernel /xen.gz-2.6.18-194.el5" has change to "kernel /xen.gz-3.4.3&...

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "...

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...", screen clears, cursor is blinking at the top left corner and not...

Hi all, Just a couple of quick questions. I have a HP DL360 G4 (dual 3.0Ghzprocessors). The processors are EM64T. I am using a TE411P in the system. 1. Should I run the a x86_64 Linux (CentOS) or just go with the plain old 32 bit version? 2. This being a dual processor system, should I turn on or off hyper thrreading? Thanks..... -------------- next par...

Any tips on solving the following performance conundrum: Asterisk 1.8.12.2 running on HP DL360 G5 and G7s tcpdump running to capture UDP 5060/SIP signaling to .pcap files All calls are ultimately B2BUA client -> asterisk -> PSTN Media stays on Asterisk at all times AGI script has exit handler that connects and updates an external database upon BYE from either side. I know that if...

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc.

Hi *, I'm running into a problem configuring bonding on an HP DL 360 G4p, running 4.3 + tg3 driver version 3.43f. I'm connecting eth0 and eth1 to a Cisco 2948 (CatOS 8.1(3)) and receiving flapping notices. The ethernet address is that of the primary interface. I have tried several different modes, including balance-rr (0), active-backup (1), and balance-alb (6). All have the

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_s...

Hello List, I have been told to get linux running on two HP DL360G4p machines (ancient rackmount xeon stuff). Unfortunately, while isolinux boots fine from CDROM, and extlinux can boot a USB stick, I cannot get extlinux to boot from the CCISS hard disks (two disks in hardware raid 1 configuration). I searched on google a lot, and found (very old, many years ago...

...b-storage: waiting for device to settle before scanning Vendor: Model: Rev: Type: Direct-Access ANSI SCSI revision: 02 sd 8:0:0:0: Attached scsi disk sda sd 8:0:0:0: Attached scsi generic sg0 type 0 usb-storage: device scan complete [root at HP-DL360 ~]# fdisk -l /dev/sda [root at HP-DL360 ~]# I need to see what data is on a bunch of disks that I found in storage and would prefer to first check if there's anything of use on them before I format them -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: h...

Hello, Has anyone out there been able to qualify the Proliant DL360 G7 for your Solaris/OI/Nexenta environments? Any pros/cons/gotchas (vs. previous generation HP servers) would be greatly appreciated. Thanks in advance! -Anh

Guys, I'll be building a couple of DL360 G4p & DL380 G4 boxes soon and I've not dealt extensively (i.e. at all) with any PC stuff that hasn't been i386. I know the DL line pretty well but it was all G2/3. So, question is, do I stick CentOS i386 or x86_64 on them? 2 boxes x 2GB RAM and 1 x 4GB, all SMP. Will.

I have purchased a used Compaq DL360 which I was going to use as a proxy server. Presently, we are using a cheap box with ipcop which is working fine but it didn't have much RAM (64MB), etc. This new box we will want to run squid and perhaps dansguardian for filtering (this is a non-profit company) and I'm wondering if I shou...

Hello all, I have a DL360 G4 1U server that does a wonderfull job with dovecot horde, Xmail and OpenLDAP for a company and serving about 40 acouunts. The machine is wonderful. I am very happy with it. However, I am running out of disk space. It has two times 76Gb Drives in RAID1 (disk mirroring) and the capacity has reache...

Hello, My host just had a faulty power supply and therefore, my Asterisk server was down for 7 hours. It was a Sunday so no one was making calls, however if it happened during the week, I'd have problems. I was trying to find a whitepaper or advice on how to set up two Asterisk servers to provide some redundancy. I've been googling "asterisk redundancy" but all I've found