Hello everyone, I'm using a TE410P, no irq sharing, and all extraneous devices disabled, such as USB, Parallel etc. I'm getting a few IRQ misses according to ZTTOOL. We're running a standard PRI_CPE interface and seem to be getting dropped calls, and errors on the D-CHANNEL occasionally. The circuit itself is very solid, it was in use on our old PBX just a few weeks ago, never had any dropped calls, or any problems. I'm receiving the following messages Jul 2 09:30:03 NOTICE[19475]: PRI got event: 4 on Primary D-channel of span 1 Jul 2 09:30:03 WARNING[19475]: No D-channels available! Using Primary on channel anyway 24! Jul 2 09:30:20 NOTICE[19475]: PRI got event: 5 on Primary D-channel of span 1 Jul 2 09:30:41 WARNING[19475]: PRI: !! Got a UA, but i'm in state 1 In between the D-Channel error notices/warings, I'll see channels 1-23 goto yellow alarm state, then I'll see them clear. It does not seem to coincide with the hourly reset of the b channels. I've looked everywhere for what these errors could mean, but I'm coming up empty handed. Could these errors be related to the IRQ misses I'm seeing? I'm only logging about 8 misses a day total. Zaptel and Zapata configs pasted below... [Zaptel.conf] span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzone=us loadzone=us [Zapata.conf] [channels] context=inbound switchtype=dms100 overlapdial=yes signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes transfer=yes cancallforward=yes callreturn=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no musiconhold=default group = 1 channel => 1-23 Any tips, tricks or debugging methods anyone could provide would be extremely helpful! I'm running CVS-HEAD as of this morning, however the problem has been occurring over the last week, with my source being updated almost daily. Thanks in advance, Brian D'Arcy
On Fri, 2 Jul 2004, Brian D'Arcy waxed:> I'm using a TE410P, no irq sharing, and all extraneous devices disabled, > such as USB, Parallel etc. I'm getting a few IRQ misses according to > ZTTOOL.8<'s Can you try changing motherboards ? Just a guess, but it seems like you've already made it quite a few steps. Might be time to blame some hardware. --Chris -- Chris Maj, Rochester cmaj_at_freedomcorpse_dot_com Pronunciation Guide: Maj == May
Chris, I'm afraid I can't change motherboards. It's a brand new IBM x345 2u server. I spec'd out this box specifically for asterisk, based on feedback from the community. It had all the characteristics asterisk "plays well with". I'm really out of ideas here. ________________________________ From: asterisk-users-admin@lists.digium.com on behalf of C. Maj Sent: Fri 7/2/2004 6:31 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] IRQ Misses and Dropped Calls? On Fri, 2 Jul 2004, Brian D'Arcy waxed:> I'm using a TE410P, no irq sharing, and all extraneous devices disabled, > such as USB, Parallel etc. I'm getting a few IRQ misses according to > ZTTOOL.8<'s Can you try changing motherboards ? Just a guess, but it seems like you've already made it quite a few steps. Might be time to blame some hardware. --Chris -- Chris Maj, Rochester cmaj_at_freedomcorpse_dot_com Pronunciation Guide: Maj == May _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/ms-tnef Size: 4687 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040702/a74d1e51/attachment.bin
Hello everyone, I'm using a TE410P, no irq sharing, and all extraneous devices disabled, such as USB, Parallel etc. I'm getting a few IRQ misses according to ZTTOOL. We're running a standard PRI_CPE interface and seem to be getting dropped calls, and errors on the D-CHANNEL occasionally. The circuit itself is very solid, it was in use on our old PBX just a few weeks ago, never had any dropped calls, or any problems. I'm receiving the following messages Jul 2 09:30:03 NOTICE[19475]: PRI got event: 4 on Primary D-channel of span 1 Jul 2 09:30:03 WARNING[19475]: No D-channels available! Using Primary on channel anyway 24! Jul 2 09:30:20 NOTICE[19475]: PRI got event: 5 on Primary D-channel of span 1 Jul 2 09:30:41 WARNING[19475]: PRI: !! Got a UA, but i'm in state 1 In between the D-Channel error notices/warings, I'll see channels 1-23 goto yellow alarm state, then I'll see them clear. It does not seem to coincide with the ~hourly reset of the b channels. I've looked everywhere for what these errors could mean, but I'm coming up empty handed. Could these errors be related to the IRQ misses I'm seeing? I'm only logging about 8 misses a day total. Zaptel and Zapata configs pasted below... [Zaptel.conf] span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzone=us loadzone=us [Zapata.conf] [channels] context=inbound switchtype=dms100 overlapdial=yes signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes transfer=yes cancallforward=yes callreturn=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no musiconhold=default group = 1 channel => 1-23 Any tips, tricks or debugging methods anyone could provide would be extremely helpful! I'm running CVS-HEAD 7/2 for libpri, zaptel and asterisk, however the problem has been occurring since we took the system live in mid-June. Thanks in advance to anyone who might can shed some light. Brian D'Arcy