It doesn't look like your using "t" or "T" in your Dial
command.
The Wiki on voip-info.org will explain those flags.
On Wed, 2004-06-30 at 20:05 -0700, Seth Mattinen wrote:> I am having trouble getting transfers to work when a zap channel is
> part of the call. I have a couple SPA-2000's and some X100P cards as my
> setup. This is what I'm trying:
>
> Dial number from phone:
> -- Executing Dial("SIP/206-2c61", "Zap/1/#######")
in new stack
> Currently on call:
> -- Called 1/#######
> Press flash to place call on hold with SPA-2000:
> -- Hungup 'Zap/1-1'
>
> As soon as I press the "flash" button on my SPA-2000 connected
phone,
> the zap channel hangs up and the call is disconnected. The same
> procedure works fine between SIP channels (flash to hold, or transfer).
> I'm hoping this is just a config problem and not a general defect,
> because it seems odd to me that I can't transfer calls when a zap
> channel is the other end of the call I want to transfer or place on
> hold.
>
> sip.conf:
>
> [206]
> type=friend
> username=206
> secret=blah
> host=dynamic
> context=from-sip
> reinvite=no
> canreinvite=no
> disallow=all
> allow=ulaw
> nat=0
>
> zapata.conf:
>
> [channels]
> language=en
> signalling=fxs_ks
> usecallerid=no
> echotraining=800
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=2.5
> txgain=7.0
> busydetect=yes
> busycount=8
> faxdetect=incoming
> context=inbound-analog1
> channel => 1
> context=inbound-analog2
> channel => 2
>
>
>
>
> --
> Seth "experientia docet" Mattinen
> sethm@rollernet.us
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Mike Benoit <ipso@snappymail.ca>