Dear Steve
after a lot of compile from spanDSP first version to K and after i have
compile * HEAD and Stable i cant understand where im wrong...
- Mandrake 9.2
- libtiff3-3.5.7-11mdk
I have add Header from your FTP but the result is this error..
Can you give me your opinion?
Thanks in advance
Dimitri
--------
-- Executing RxFAX("Zap/35-1", "/home/user/testfax.tif")
in new stack
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Start receiving document
Changed from phase 1 to 4
Sending ident>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
Slow carrier up
<<< TSI: 43 37 30 38 30 35 33 31 33 33 30 20 20 20 20 20 20 20 20 20 20
TSI without final frame tag
Remote fax gave TSI as: "0331350807"
<<< DCS: 83 00 86 a0 00
DCS with final frame tag
In state 9
DCS:
Can receive fax
Selected data signalling rate: V.29, 9600bps
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Minimum scan line time: 10ms
Get at 9600
Changed from phase 3 to 5
Fast carrier up
Coarse carrier frequency 1713.21 (13)
Fast carrier down
Fast carrier up
Coarse carrier frequency 1699.33 (86)
Fast carrier training failed
Fast carrier down
Fast carrier up
Coarse carrier frequency 1700.08 (4917)
Fast carrier down
Fast carrier up
Coarse carrier frequency 1699.39 (86)
Fast carrier training failed
Fast carrier down
Fast carrier up
Coarse carrier frequency 1700.15 (4917)
Fast carrier down
Fast carrier up
Coarse carrier frequency 1699.36 (86)
Fast carrier training failed
Fast carrier down
------
